From: Don Fry <brazilnut@us.ibm.com>
To: tsbogend@alpha.franken.de, jgarzik@pobox.com
Cc: netdev@vger.kernel.org
Subject: [PATCH] pcnet32: break in 2.6.18-rc1 identified
Date: Tue, 22 Aug 2006 10:22:37 -0700 [thread overview]
Message-ID: <20060822172237.GA27557@us.ibm.com> (raw)
A change I made for 2.6.17 and another for 2.6.18 do not work on older
pcnet32 chips which I do not have access to. If the chip is a 79C970 or
79C965, do not try and suspend or check the link status.
I have tested with a 79C970A, 79C971, 79C972, 79C973, 79C975, 79C976,
and 79C978.
Please apply to 2.6.18.
Signed-off-by: Don Fry <brazilnut@us.ibm.com>
--- linux-2.6.18-rc3-git1/drivers/net/orig.pcnet32.c Tue Aug 1 14:47:07 2006
+++ linux-2.6.18-rc3-git1/drivers/net/pcnet32.c Thu Aug 3 08:36:26 2006
@@ -202,6 +202,8 @@ static int homepna[MAX_UNITS];
#define CSR15 15
#define PCNET32_MC_FILTER 8
+#define PCNET32_79C970A 0x2621
+
/* The PCNET32 Rx and Tx ring descriptors. */
struct pcnet32_rx_head {
u32 base;
@@ -289,6 +291,7 @@ struct pcnet32_private {
/* each bit indicates an available PHY */
u32 phymask;
+ unsigned short chip_version; /* which variant this is */
};
static int pcnet32_probe_pci(struct pci_dev *, const struct pci_device_id *);
@@ -724,9 +727,11 @@ static u32 pcnet32_get_link(struct net_d
spin_lock_irqsave(&lp->lock, flags);
if (lp->mii) {
r = mii_link_ok(&lp->mii_if);
- } else {
+ } else if (lp->chip_version >= PCNET32_79C970A) {
ulong ioaddr = dev->base_addr; /* card base I/O address */
r = (lp->a.read_bcr(ioaddr, 4) != 0xc0);
+ } else { /* can not detect link on really old chips */
+ r = 1;
}
spin_unlock_irqrestore(&lp->lock, flags);
@@ -1091,6 +1096,10 @@ static int pcnet32_suspend(struct net_de
ulong ioaddr = dev->base_addr;
int ticks;
+ /* really old chips have to be stopped. */
+ if (lp->chip_version < PCNET32_79C970A)
+ return 0;
+
/* set SUSPEND (SPND) - CSR5 bit 0 */
csr5 = a->read_csr(ioaddr, CSR5);
a->write_csr(ioaddr, CSR5, csr5 | CSR5_SUSPEND);
@@ -1529,6 +1538,7 @@ pcnet32_probe1(unsigned long ioaddr, int
lp->mii_if.reg_num_mask = 0x1f;
lp->dxsuflo = dxsuflo;
lp->mii = mii;
+ lp->chip_version = chip_version;
lp->msg_enable = pcnet32_debug;
if ((cards_found >= MAX_UNITS)
|| (options[cards_found] > sizeof(options_mapping)))
@@ -1839,10 +1849,7 @@ static int pcnet32_open(struct net_devic
val |= 2;
} else if (lp->options & PCNET32_PORT_ASEL) {
/* workaround of xSeries250, turn on for 79C975 only */
- i = ((lp->a.read_csr(ioaddr, 88) |
- (lp->a.
- read_csr(ioaddr, 89) << 16)) >> 12) & 0xffff;
- if (i == 0x2627)
+ if (lp->chip_version == 0x2627)
val |= 3;
}
lp->a.write_bcr(ioaddr, 9, val);
@@ -1986,9 +1993,11 @@ static int pcnet32_open(struct net_devic
netif_start_queue(dev);
- /* Print the link status and start the watchdog */
- pcnet32_check_media(dev, 1);
- mod_timer(&(lp->watchdog_timer), PCNET32_WATCHDOG_TIMEOUT);
+ if (lp->chip_version >= PCNET32_79C970A) {
+ /* Print the link status and start the watchdog */
+ pcnet32_check_media(dev, 1);
+ mod_timer(&(lp->watchdog_timer), PCNET32_WATCHDOG_TIMEOUT);
+ }
i = 0;
while (i++ < 100)
--
Don Fry
brazilnut@us.ibm.com
next reply other threads:[~2006-08-22 17:22 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-22 17:22 Don Fry [this message]
[not found] <44C65AED.4020508@garzik.org>
2006-08-03 16:06 ` [PATCH] pcnet32: break in 2.6.18-rc1 identified Don Fry
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060822172237.GA27557@us.ibm.com \
--to=brazilnut@us.ibm.com \
--cc=jgarzik@pobox.com \
--cc=netdev@vger.kernel.org \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).