[PATCH] bcm43xx-d80211: add support for 4312

[PATCH] bcm43xx-d80211: add support for 4312

[Michael Buesch]

Hi John,

Please apply this to wireless-dev.

Larry, theoretically it's possible to backport this
to wireless-2.6. But it depends on some other changes
that are (going to be) in the ssb module. That's support
for PCIE and CHIPCOMMON2, as far as I can see.
So if you want to backport this, you also have to backport
the PCIE and CHIPCOMMON2 stuff.

--

Add support for Broadcom 4312 a/b/g devices.

Signed-off-by: Michael Buesch <mb-fseUSCV1ubazQB+pC5nmwQ@public.gmane.org>

Index: wireless-dev/drivers/net/wireless/d80211/bcm43xx/bcm43xx_main.c
===================================================================
--- wireless-dev.orig/drivers/net/wireless/d80211/bcm43xx/bcm43xx_main.c	2006-08-24 22:49:45.000000000 +0200
+++ wireless-dev/drivers/net/wireless/d80211/bcm43xx/bcm43xx_main.c	2006-08-26 12:39:24.000000000 +0200
@@ -129,6 +129,8 @@ static struct pci_device_id bcm43xx_pci_
 	{ PCI_VENDOR_ID_BROADCOM, 0x4301, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 	/* Broadcom 4307 802.11b */
 	{ PCI_VENDOR_ID_BROADCOM, 0x4307, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	/* Broadcom 4312 802.11a/b/g */
+	{ PCI_VENDOR_ID_BROADCOM, 0x4312, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 	/* Broadcom 4318 802.11b/g */
 	{ PCI_VENDOR_ID_BROADCOM, 0x4318, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 	/* Broadcom 4319 802.11b/g */
@@ -2742,7 +2744,7 @@ static int bcm43xx_probe_cores(struct bc
 
 			switch (core->rev) {
 			case 2: case 4: case 5: case 6:
-			case 7: case 9:
+			case 7: case 9: case 10:
 				break;
 			default:
 				printk(KERN_ERR PFX "Error: Unsupported 80211 core revision %u\n",
@@ -3247,7 +3249,7 @@ static int bcm43xx_read_phyinfo(struct b
 			phy_rev_ok = 0;
 		break;
 	case BCM43xx_PHYTYPE_G:
-		if (phy_rev > 7)
+		if (phy_rev > 8)
 			phy_rev_ok = 0;
 		break;
 	default:


-- 
Greetings Michael.