* Please pull bcm43xx-d80211 bugfixes and new features
@ 2006-10-02 16:43 Michael Buesch
2006-10-03 3:44 ` Larry Finger
0 siblings, 1 reply; 10+ messages in thread
From: Michael Buesch @ 2006-10-02 16:43 UTC (permalink / raw)
To: linville-2XuSBdqkA4R54TAoqtyWWQ
Cc: netdev-u79uwXL29TY76Z2rM5mHXA, bcm43xx-dev-0fE9KPoRgkgATYTw5x5z8w,
Larry Finger
Hi John,
Please pull from my tree
git pull http://bu3sch.de/git/wireless-dev.git for-linville
This will pull various bugfixes and feature improvements.
Most noteably it will pull a bugfix for a crash introduced
by an earlier patch to d80211 which changed RX status information
handling.
The new features include support for the new v4 firmware.
I also did my homework to get better support for OpenWRT
devices in ssb.
The list of pulled changesets is:
Michael Buesch:
ssb: Abstract bus accesses.
bcm43xx-d80211: convert to ssb abstract bus access API
bcm43xx-d80211: Don't crash if we use v4 firmware.
bcm43xx-d80211: Always make fwpostfix option available.
bcm43xx-d80211: Firmware revision/patchlevel detection.
bcm43xx-d80211: Add support for v4 firmware.
bcm43xx-d80211: add SHM constants
bcm43xx-d80211: Don't use low level netif and ieee80211_netif_oper functions.
bcm43xx-d80211: DMA-mask fixes.
bcm43xx-d80211: Remove some BCM947XX ifdefs,
Merge branch 'master' of git://kernel.org/.../linville/wireless-dev
bcm43xx-d80211: Assign all fields in the RX status report.
bcm43xx-d80211: Set channel cookie to prevent ghost packets.
bcm43xx-d80211: Prevent crash by setting active wlcore to NULL on wlcore-select failure.
The diffstat is:
drivers/misc/ssb.c | 431 ++++++-----
drivers/net/wireless/d80211/bcm43xx/bcm43xx.h | 143 +++
.../net/wireless/d80211/bcm43xx/bcm43xx_debugfs.c | 295 +++-----
.../net/wireless/d80211/bcm43xx/bcm43xx_debugfs.h | 35 -
drivers/net/wireless/d80211/bcm43xx/bcm43xx_dma.c | 149 ++--
drivers/net/wireless/d80211/bcm43xx/bcm43xx_dma.h | 18
drivers/net/wireless/d80211/bcm43xx/bcm43xx_leds.c | 16
drivers/net/wireless/d80211/bcm43xx/bcm43xx_main.c | 820 +++++++++-----------
drivers/net/wireless/d80211/bcm43xx/bcm43xx_phy.c | 76 +-
drivers/net/wireless/d80211/bcm43xx/bcm43xx_pio.c | 104 +--
drivers/net/wireless/d80211/bcm43xx/bcm43xx_pio.h | 12
.../net/wireless/d80211/bcm43xx/bcm43xx_power.c | 125 +---
.../net/wireless/d80211/bcm43xx/bcm43xx_radio.c | 143 ++--
.../net/wireless/d80211/bcm43xx/bcm43xx_radio.h | 1
drivers/net/wireless/d80211/bcm43xx/bcm43xx_xmit.c | 309 +++++++-
drivers/net/wireless/d80211/bcm43xx/bcm43xx_xmit.h | 247 +++++-
include/linux/ssb.h | 71 +-
17 files changed, 1681 insertions(+), 1314 deletions(-)
--
Greetings Michael.
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: Please pull bcm43xx-d80211 bugfixes and new features 2006-10-02 16:43 Please pull bcm43xx-d80211 bugfixes and new features Michael Buesch @ 2006-10-03 3:44 ` Larry Finger 2006-10-03 11:58 ` Michael Buesch 0 siblings, 1 reply; 10+ messages in thread From: Larry Finger @ 2006-10-03 3:44 UTC (permalink / raw) To: Michael Buesch; +Cc: linville, bcm43xx-dev, netdev Michael Buesch wrote: > Hi John, > > Please pull from my tree > git pull http://bu3sch.de/git/wireless-dev.git for-linville > > This will pull various bugfixes and feature improvements. > Most noteably it will pull a bugfix for a crash introduced > by an earlier patch to d80211 which changed RX status information > handling. > > The new features include support for the new v4 firmware. > I also did my homework to get better support for OpenWRT > devices in ssb. > > > The list of pulled changesets is: > > Michael Buesch: > ssb: Abstract bus accesses. > bcm43xx-d80211: convert to ssb abstract bus access API > bcm43xx-d80211: Don't crash if we use v4 firmware. > bcm43xx-d80211: Always make fwpostfix option available. > bcm43xx-d80211: Firmware revision/patchlevel detection. > bcm43xx-d80211: Add support for v4 firmware. > bcm43xx-d80211: add SHM constants > bcm43xx-d80211: Don't use low level netif and ieee80211_netif_oper functions. > bcm43xx-d80211: DMA-mask fixes. > bcm43xx-d80211: Remove some BCM947XX ifdefs, > Merge branch 'master' of git://kernel.org/.../linville/wireless-dev > bcm43xx-d80211: Assign all fields in the RX status report. > bcm43xx-d80211: Set channel cookie to prevent ghost packets. > bcm43xx-d80211: Prevent crash by setting active wlcore to NULL on wlcore-select failure. > > > The diffstat is: > > drivers/misc/ssb.c | 431 ++++++----- > drivers/net/wireless/d80211/bcm43xx/bcm43xx.h | 143 +++ > .../net/wireless/d80211/bcm43xx/bcm43xx_debugfs.c | 295 +++----- > .../net/wireless/d80211/bcm43xx/bcm43xx_debugfs.h | 35 - > drivers/net/wireless/d80211/bcm43xx/bcm43xx_dma.c | 149 ++-- > drivers/net/wireless/d80211/bcm43xx/bcm43xx_dma.h | 18 > drivers/net/wireless/d80211/bcm43xx/bcm43xx_leds.c | 16 > drivers/net/wireless/d80211/bcm43xx/bcm43xx_main.c | 820 +++++++++----------- > drivers/net/wireless/d80211/bcm43xx/bcm43xx_phy.c | 76 +- > drivers/net/wireless/d80211/bcm43xx/bcm43xx_pio.c | 104 +-- > drivers/net/wireless/d80211/bcm43xx/bcm43xx_pio.h | 12 > .../net/wireless/d80211/bcm43xx/bcm43xx_power.c | 125 +--- > .../net/wireless/d80211/bcm43xx/bcm43xx_radio.c | 143 ++-- > .../net/wireless/d80211/bcm43xx/bcm43xx_radio.h | 1 > drivers/net/wireless/d80211/bcm43xx/bcm43xx_xmit.c | 309 +++++++- > drivers/net/wireless/d80211/bcm43xx/bcm43xx_xmit.h | 247 +++++- > include/linux/ssb.h | 71 +- > 17 files changed, 1681 insertions(+), 1314 deletions(-) > Michael, There is something wrong with wireless-dev after I pulled your changes. The logs are: kernel: ssb: Core 0 found: cc 0800, rev 02, vendor 4243 kernel: ssb: Core 1 found: cc 0812, rev 04, vendor 4243 kernel: ssb: Core 2 found: cc 080D, rev 01, vendor 4243 kernel: ssb: Core 3 found: cc 0807, rev 01, vendor 4243 kernel: ssb: Core 4 found: cc 0804, rev 07, vendor 4243 kernel: ssb: Core 5 found: cc 0812, rev 04, vendor 4243 kernel: bcm43xx_d80211: Ignoring additional 802.11 core. kernel: bcm43xx_d80211: Broadcom 4306 WLAN found kernel: ssb: Switching to core 4 kernel: bcm43xx_d80211: PHY connected kernel: ssb: Switching to core 1 kernel: bcm43xx_d80211: Detected PHY: Version: 1, Type 2, Revision 1 kernel: bcm43xx_d80211: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) kernel: bcm43xx_d80211: Radio turned off kernel: bcm43xx_d80211: Radio turned off kernel: wmaster0: Selected rate control algorithm 'simple' kernel: bcm43xx_d80211: Virtual interface added (type: 0x00000002, ID: 4, MAC: 00 :06:25:40:6f:03) kernel: bcm43xx_d80211: PHY connected kernel: bcm43xx_d80211: PHY disconnected kernel: bcm43xx_d80211: PHY connected kernel: bcm43xx_d80211: firmware revision FE84, patchlevel 90B4, date 2000-14-248 29:46:18 kernel: ssb: Switching to core 0 kernel: ssb: Switching to core 1 kernel: bcm43xx_d80211: Radio turned on kernel: bcm43xx_d80211: Chip initialized kernel: bcm43xx_d80211: 30-bit DMA initialized kernel: bcm43xx_d80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/d80211/bcm43xx/bcm43xx_main.c:871 ..... kernel: bcm43xx_d80211: Keys cleared kernel: bcm43xx_d80211: Selected 802.11 core (phytype 2) kernel: wmaster0: Does not support passive scan, disabled kernel: wlan1: starting scan kernel: HW CONFIG: channel=1 freq=2412 phymode=3 kernel: HW CONFIG: channel=2 freq=2417 phymode=3 kernel: bcm43xx_d80211: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR kernel: bcm43xx_d80211: ASSERTION FAILED (0) at: drivers/net/wireless/d80211/bcm43xx/bcm43xx_dma.c:1020:parse_cookie() kernel: bcm43xx_d80211: ASSERTION FAILED (ring && *slot >= 0 && *slot < ring->nr_slots) at: drivers/net/wireless/d80211/bcm43xx/bcm43xx_dma.c:1023:parse_cookie() kernel: bcm43xx_d80211: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR kernel: bcm43xx_d80211: ASSERTION FAILED (0) at: drivers/net/wireless/d80211/bcm43xx/bcm43xx_dma.c:1020:parse_cookie() kernel: bcm43xx_d80211: ASSERTION FAILED (ring && *slot >= 0 && *slot < ring->nr_ slots) at: drivers/net/wireless/d80211/bcm43xx/bcm43xx_dma.c:1023:parse_cookie() If you need any other info, please contact me. Larry ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Please pull bcm43xx-d80211 bugfixes and new features 2006-10-03 3:44 ` Larry Finger @ 2006-10-03 11:58 ` Michael Buesch [not found] ` <200610031358.33760.mb-fseUSCV1ubazQB+pC5nmwQ@public.gmane.org> 0 siblings, 1 reply; 10+ messages in thread From: Michael Buesch @ 2006-10-03 11:58 UTC (permalink / raw) To: Larry Finger; +Cc: linville, bcm43xx-dev, netdev On Tuesday 03 October 2006 05:44, Larry Finger wrote: > Michael Buesch wrote: > > Hi John, > > > > Please pull from my tree > > git pull http://bu3sch.de/git/wireless-dev.git for-linville > > > > This will pull various bugfixes and feature improvements. > > Most noteably it will pull a bugfix for a crash introduced > > by an earlier patch to d80211 which changed RX status information > > handling. > > > > The new features include support for the new v4 firmware. > > I also did my homework to get better support for OpenWRT > > devices in ssb. > > > > > > The list of pulled changesets is: > > > > Michael Buesch: > > ssb: Abstract bus accesses. > > bcm43xx-d80211: convert to ssb abstract bus access API > > bcm43xx-d80211: Don't crash if we use v4 firmware. > > bcm43xx-d80211: Always make fwpostfix option available. > > bcm43xx-d80211: Firmware revision/patchlevel detection. > > bcm43xx-d80211: Add support for v4 firmware. > > bcm43xx-d80211: add SHM constants > > bcm43xx-d80211: Don't use low level netif and ieee80211_netif_oper functions. > > bcm43xx-d80211: DMA-mask fixes. > > bcm43xx-d80211: Remove some BCM947XX ifdefs, > > Merge branch 'master' of git://kernel.org/.../linville/wireless-dev > > bcm43xx-d80211: Assign all fields in the RX status report. > > bcm43xx-d80211: Set channel cookie to prevent ghost packets. > > bcm43xx-d80211: Prevent crash by setting active wlcore to NULL on wlcore-select failure. > > > > > > The diffstat is: > > > > drivers/misc/ssb.c | 431 ++++++----- > > drivers/net/wireless/d80211/bcm43xx/bcm43xx.h | 143 +++ > > .../net/wireless/d80211/bcm43xx/bcm43xx_debugfs.c | 295 +++----- > > .../net/wireless/d80211/bcm43xx/bcm43xx_debugfs.h | 35 - > > drivers/net/wireless/d80211/bcm43xx/bcm43xx_dma.c | 149 ++-- > > drivers/net/wireless/d80211/bcm43xx/bcm43xx_dma.h | 18 > > drivers/net/wireless/d80211/bcm43xx/bcm43xx_leds.c | 16 > > drivers/net/wireless/d80211/bcm43xx/bcm43xx_main.c | 820 +++++++++----------- > > drivers/net/wireless/d80211/bcm43xx/bcm43xx_phy.c | 76 +- > > drivers/net/wireless/d80211/bcm43xx/bcm43xx_pio.c | 104 +-- > > drivers/net/wireless/d80211/bcm43xx/bcm43xx_pio.h | 12 > > .../net/wireless/d80211/bcm43xx/bcm43xx_power.c | 125 +--- > > .../net/wireless/d80211/bcm43xx/bcm43xx_radio.c | 143 ++-- > > .../net/wireless/d80211/bcm43xx/bcm43xx_radio.h | 1 > > drivers/net/wireless/d80211/bcm43xx/bcm43xx_xmit.c | 309 +++++++- > > drivers/net/wireless/d80211/bcm43xx/bcm43xx_xmit.h | 247 +++++- > > include/linux/ssb.h | 71 +- > > 17 files changed, 1681 insertions(+), 1314 deletions(-) > > > Michael, > > There is something wrong with wireless-dev after I pulled your changes. The logs are: > > kernel: ssb: Core 0 found: cc 0800, rev 02, vendor 4243 > kernel: ssb: Core 1 found: cc 0812, rev 04, vendor 4243 > kernel: ssb: Core 2 found: cc 080D, rev 01, vendor 4243 > kernel: ssb: Core 3 found: cc 0807, rev 01, vendor 4243 > kernel: ssb: Core 4 found: cc 0804, rev 07, vendor 4243 > kernel: ssb: Core 5 found: cc 0812, rev 04, vendor 4243 > kernel: bcm43xx_d80211: Ignoring additional 802.11 core. > kernel: bcm43xx_d80211: Broadcom 4306 WLAN found > kernel: ssb: Switching to core 4 > kernel: bcm43xx_d80211: PHY connected > kernel: ssb: Switching to core 1 > kernel: bcm43xx_d80211: Detected PHY: Version: 1, Type 2, Revision 1 > kernel: bcm43xx_d80211: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) > kernel: bcm43xx_d80211: Radio turned off > kernel: bcm43xx_d80211: Radio turned off > kernel: wmaster0: Selected rate control algorithm 'simple' > kernel: bcm43xx_d80211: Virtual interface added (type: 0x00000002, ID: 4, MAC: 00 > :06:25:40:6f:03) > kernel: bcm43xx_d80211: PHY connected > kernel: bcm43xx_d80211: PHY disconnected > kernel: bcm43xx_d80211: PHY connected > kernel: bcm43xx_d80211: firmware revision FE84, patchlevel 90B4, date 2000-14-248 > 29:46:18 Uhm, which firmware are you running? > kernel: ssb: Switching to core 0 > kernel: ssb: Switching to core 1 > kernel: bcm43xx_d80211: Radio turned on > kernel: bcm43xx_d80211: Chip initialized > kernel: bcm43xx_d80211: 30-bit DMA initialized > kernel: bcm43xx_d80211: TODO: Incomplete code in keymac_write() at > drivers/net/wireless/d80211/bcm43xx/bcm43xx_main.c:871 > ..... > kernel: bcm43xx_d80211: Keys cleared > kernel: bcm43xx_d80211: Selected 802.11 core (phytype 2) > kernel: wmaster0: Does not support passive scan, disabled > kernel: wlan1: starting scan > kernel: HW CONFIG: channel=1 freq=2412 phymode=3 > kernel: HW CONFIG: channel=2 freq=2417 phymode=3 > kernel: bcm43xx_d80211: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR > kernel: bcm43xx_d80211: ASSERTION FAILED (0) at: > drivers/net/wireless/d80211/bcm43xx/bcm43xx_dma.c:1020:parse_cookie() > kernel: bcm43xx_d80211: ASSERTION FAILED (ring && *slot >= 0 && *slot < ring->nr_slots) at: > drivers/net/wireless/d80211/bcm43xx/bcm43xx_dma.c:1023:parse_cookie() > kernel: bcm43xx_d80211: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR > kernel: bcm43xx_d80211: ASSERTION FAILED (0) at: > drivers/net/wireless/d80211/bcm43xx/bcm43xx_dma.c:1020:parse_cookie() > kernel: bcm43xx_d80211: ASSERTION FAILED (ring && *slot >= 0 && *slot < ring->nr_ > slots) at: drivers/net/wireless/d80211/bcm43xx/bcm43xx_dma.c:1023:parse_cookie() > > If you need any other info, please contact me. > > Larry > -- Greetings Michael. ^ permalink raw reply [flat|nested] 10+ messages in thread
[parent not found: <200610031358.33760.mb-fseUSCV1ubazQB+pC5nmwQ@public.gmane.org>]
* Re: Please pull bcm43xx-d80211 bugfixes and new features [not found] ` <200610031358.33760.mb-fseUSCV1ubazQB+pC5nmwQ@public.gmane.org> @ 2006-10-03 12:36 ` Martin Langer 2006-10-03 13:05 ` Michael Buesch 2006-10-03 14:36 ` Larry Finger 1 sibling, 1 reply; 10+ messages in thread From: Martin Langer @ 2006-10-03 12:36 UTC (permalink / raw) To: Michael Buesch Cc: netdev-u79uwXL29TY76Z2rM5mHXA, linville-2XuSBdqkA4R54TAoqtyWWQ, bcm43xx-dev-0fE9KPoRgkgATYTw5x5z8w, Larry Finger On Tue, Oct 03, 2006 at 01:58:33PM +0200, Michael Buesch wrote: > On Tuesday 03 October 2006 05:44, Larry Finger wrote: > > > > kernel: ssb: Core 0 found: cc 0800, rev 02, vendor 4243 > > kernel: ssb: Core 1 found: cc 0812, rev 04, vendor 4243 > > kernel: ssb: Core 2 found: cc 080D, rev 01, vendor 4243 > > kernel: ssb: Core 3 found: cc 0807, rev 01, vendor 4243 > > kernel: ssb: Core 4 found: cc 0804, rev 07, vendor 4243 > > kernel: ssb: Core 5 found: cc 0812, rev 04, vendor 4243 > > kernel: bcm43xx_d80211: Ignoring additional 802.11 core. > > kernel: bcm43xx_d80211: Broadcom 4306 WLAN found > > kernel: ssb: Switching to core 4 > > kernel: bcm43xx_d80211: PHY connected > > kernel: ssb: Switching to core 1 > > kernel: bcm43xx_d80211: Detected PHY: Version: 1, Type 2, Revision 1 > > kernel: bcm43xx_d80211: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) > > kernel: bcm43xx_d80211: Radio turned off > > kernel: bcm43xx_d80211: Radio turned off > > kernel: wmaster0: Selected rate control algorithm 'simple' > > kernel: bcm43xx_d80211: Virtual interface added (type: 0x00000002, ID: 4, MAC: 00 > > :06:25:40:6f:03) > > kernel: bcm43xx_d80211: PHY connected > > kernel: bcm43xx_d80211: PHY disconnected > > kernel: bcm43xx_d80211: PHY connected > > kernel: bcm43xx_d80211: firmware revision FE84, patchlevel 90B4, date 2000-14-248 > > 29:46:18 > > Uhm, which firmware are you running? v4 testers should use the SVN version of fwcutter. There was a v4 windriver bug in fwcutter .... some time ago. Martin ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Please pull bcm43xx-d80211 bugfixes and new features 2006-10-03 12:36 ` Martin Langer @ 2006-10-03 13:05 ` Michael Buesch 0 siblings, 0 replies; 10+ messages in thread From: Michael Buesch @ 2006-10-03 13:05 UTC (permalink / raw) To: bcm43xx-dev; +Cc: Martin Langer, Larry Finger, linville, netdev On Tuesday 03 October 2006 14:36, Martin Langer wrote: > On Tue, Oct 03, 2006 at 01:58:33PM +0200, Michael Buesch wrote: > > On Tuesday 03 October 2006 05:44, Larry Finger wrote: > > > > > > kernel: ssb: Core 0 found: cc 0800, rev 02, vendor 4243 > > > kernel: ssb: Core 1 found: cc 0812, rev 04, vendor 4243 > > > kernel: ssb: Core 2 found: cc 080D, rev 01, vendor 4243 > > > kernel: ssb: Core 3 found: cc 0807, rev 01, vendor 4243 > > > kernel: ssb: Core 4 found: cc 0804, rev 07, vendor 4243 > > > kernel: ssb: Core 5 found: cc 0812, rev 04, vendor 4243 > > > kernel: bcm43xx_d80211: Ignoring additional 802.11 core. > > > kernel: bcm43xx_d80211: Broadcom 4306 WLAN found > > > kernel: ssb: Switching to core 4 > > > kernel: bcm43xx_d80211: PHY connected > > > kernel: ssb: Switching to core 1 > > > kernel: bcm43xx_d80211: Detected PHY: Version: 1, Type 2, Revision 1 > > > kernel: bcm43xx_d80211: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) > > > kernel: bcm43xx_d80211: Radio turned off > > > kernel: bcm43xx_d80211: Radio turned off > > > kernel: wmaster0: Selected rate control algorithm 'simple' > > > kernel: bcm43xx_d80211: Virtual interface added (type: 0x00000002, ID: 4, MAC: 00 > > > :06:25:40:6f:03) > > > kernel: bcm43xx_d80211: PHY connected > > > kernel: bcm43xx_d80211: PHY disconnected > > > kernel: bcm43xx_d80211: PHY connected > > > kernel: bcm43xx_d80211: firmware revision FE84, patchlevel 90B4, date 2000-14-248 > > > 29:46:18 > > > > Uhm, which firmware are you running? > > v4 testers should use the SVN version of fwcutter. There was a v4 > windriver bug in fwcutter .... some time ago. For convenience I modified current fwcutter to not reject v4 firmware files (but print a big fat warning) and tagged the 005 release here: http://prdownload.berlios.de/bcm43xx/bcm43xx-fwcutter-005.tar.bz2 -- Greetings Michael. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Please pull bcm43xx-d80211 bugfixes and new features [not found] ` <200610031358.33760.mb-fseUSCV1ubazQB+pC5nmwQ@public.gmane.org> 2006-10-03 12:36 ` Martin Langer @ 2006-10-03 14:36 ` Larry Finger [not found] ` <45227569.6070901-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org> 1 sibling, 1 reply; 10+ messages in thread From: Larry Finger @ 2006-10-03 14:36 UTC (permalink / raw) To: Michael Buesch Cc: netdev-u79uwXL29TY76Z2rM5mHXA, linville-2XuSBdqkA4R54TAoqtyWWQ, bcm43xx-dev-0fE9KPoRgkgATYTw5x5z8w Michael Buesch wrote: >> kernel: bcm43xx_d80211: firmware revision FE84, patchlevel 90B4, date 2000-14-248 >> 29:46:18 > > Uhm, which firmware are you running? The softmac version reports the following (The "loaded" messages are something I'm trying.): kernel: bcm43xx: Firmware: Microcode "bcm43xx_microcode4.fw" loaded. kernel: bcm43xx: Firmware: PCM "bcm43xx_pcm4.fw" loaded. kernel: bcm43xx: Firmware: InitVals0 "bcm43xx_initval01.fw" loaded. kernel: bcm43xx: Microcode rev 0x123, pl 0x21 (2005-01-22 19:48:06) Larry ^ permalink raw reply [flat|nested] 10+ messages in thread
[parent not found: <45227569.6070901-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>]
* Re: Please pull bcm43xx-d80211 bugfixes and new features [not found] ` <45227569.6070901-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org> @ 2006-10-03 14:48 ` Michael Buesch 2006-10-03 15:07 ` Larry Finger 2006-10-03 15:12 ` Martin Langer 0 siblings, 2 replies; 10+ messages in thread From: Michael Buesch @ 2006-10-03 14:48 UTC (permalink / raw) To: Larry Finger Cc: netdev-u79uwXL29TY76Z2rM5mHXA, bcm43xx-dev-0fE9KPoRgkgATYTw5x5z8w, linville-2XuSBdqkA4R54TAoqtyWWQ On Tuesday 03 October 2006 16:36, Larry Finger wrote: > Michael Buesch wrote: > >> kernel: bcm43xx_d80211: firmware revision FE84, patchlevel 90B4, date 2000-14-248 > >> 29:46:18 > > > > Uhm, which firmware are you running? > > The softmac version reports the following (The "loaded" messages are something I'm trying.): > > kernel: bcm43xx: Firmware: Microcode "bcm43xx_microcode4.fw" loaded. > kernel: bcm43xx: Firmware: PCM "bcm43xx_pcm4.fw" loaded. > kernel: bcm43xx: Firmware: InitVals0 "bcm43xx_initval01.fw" loaded. > kernel: bcm43xx: Microcode rev 0x123, pl 0x21 (2005-01-22 19:48:06) Well, so now you know where the problem is. I can't debug this for you ;) -- Greetings Michael. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Please pull bcm43xx-d80211 bugfixes and new features 2006-10-03 14:48 ` Michael Buesch @ 2006-10-03 15:07 ` Larry Finger 2006-10-03 15:12 ` Martin Langer 1 sibling, 0 replies; 10+ messages in thread From: Larry Finger @ 2006-10-03 15:07 UTC (permalink / raw) To: Michael Buesch; +Cc: bcm43xx-dev, netdev, linville Michael Buesch wrote: > On Tuesday 03 October 2006 16:36, Larry Finger wrote: >> Michael Buesch wrote: >>>> kernel: bcm43xx_d80211: firmware revision FE84, patchlevel 90B4, date 2000-14-248 >>>> 29:46:18 >>> Uhm, which firmware are you running? >> The softmac version reports the following (The "loaded" messages are something I'm trying.): >> >> kernel: bcm43xx: Firmware: Microcode "bcm43xx_microcode4.fw" loaded. >> kernel: bcm43xx: Firmware: PCM "bcm43xx_pcm4.fw" loaded. >> kernel: bcm43xx: Firmware: InitVals0 "bcm43xx_initval01.fw" loaded. >> kernel: bcm43xx: Microcode rev 0x123, pl 0x21 (2005-01-22 19:48:06) > > Well, so now you know where the problem is. > I can't debug this for you ;) > I repulled wireless-dev and rebuilt it to find the same problem, which probably is not in your recent patches. When I get a chance, I'll see if I can where it goes wrong. Larry ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Please pull bcm43xx-d80211 bugfixes and new features 2006-10-03 14:48 ` Michael Buesch 2006-10-03 15:07 ` Larry Finger @ 2006-10-03 15:12 ` Martin Langer 2006-10-03 15:14 ` Michael Buesch 1 sibling, 1 reply; 10+ messages in thread From: Martin Langer @ 2006-10-03 15:12 UTC (permalink / raw) To: Michael Buesch; +Cc: Larry Finger, netdev, bcm43xx-dev, linville On Tue, Oct 03, 2006 at 04:48:04PM +0200, Michael Buesch wrote: > On Tuesday 03 October 2006 16:36, Larry Finger wrote: > > Michael Buesch wrote: > > >> kernel: bcm43xx_d80211: firmware revision FE84, patchlevel 90B4, date 2000-14-248 > > >> 29:46:18 > > > > > > Uhm, which firmware are you running? > > > > The softmac version reports the following (The "loaded" messages are something I'm trying.): > > > > kernel: bcm43xx: Firmware: Microcode "bcm43xx_microcode4.fw" loaded. > > kernel: bcm43xx: Firmware: PCM "bcm43xx_pcm4.fw" loaded. > > kernel: bcm43xx: Firmware: InitVals0 "bcm43xx_initval01.fw" loaded. > > kernel: bcm43xx: Microcode rev 0x123, pl 0x21 (2005-01-22 19:48:06) > > Well, so now you know where the problem is. > I can't debug this for you ;) You have to wait some time to get correct values. That was the reason why I placed version reading originally after bcm43xx_initialize_irq(), because I got strange values if I read the version directly after the upload. Martin ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Please pull bcm43xx-d80211 bugfixes and new features 2006-10-03 15:12 ` Martin Langer @ 2006-10-03 15:14 ` Michael Buesch 0 siblings, 0 replies; 10+ messages in thread From: Michael Buesch @ 2006-10-03 15:14 UTC (permalink / raw) To: Martin Langer Cc: netdev-u79uwXL29TY76Z2rM5mHXA, bcm43xx-dev-0fE9KPoRgkgATYTw5x5z8w, linville-2XuSBdqkA4R54TAoqtyWWQ, Larry Finger On Tuesday 03 October 2006 17:12, Martin Langer wrote: > On Tue, Oct 03, 2006 at 04:48:04PM +0200, Michael Buesch wrote: > > On Tuesday 03 October 2006 16:36, Larry Finger wrote: > > > Michael Buesch wrote: > > > >> kernel: bcm43xx_d80211: firmware revision FE84, patchlevel 90B4, date 2000-14-248 > > > >> 29:46:18 > > > > > > > > Uhm, which firmware are you running? > > > > > > The softmac version reports the following (The "loaded" messages are something I'm trying.): > > > > > > kernel: bcm43xx: Firmware: Microcode "bcm43xx_microcode4.fw" loaded. > > > kernel: bcm43xx: Firmware: PCM "bcm43xx_pcm4.fw" loaded. > > > kernel: bcm43xx: Firmware: InitVals0 "bcm43xx_initval01.fw" loaded. > > > kernel: bcm43xx: Microcode rev 0x123, pl 0x21 (2005-01-22 19:48:06) > > > > Well, so now you know where the problem is. > > I can't debug this for you ;) > > You have to wait some time to get correct values. That was the reason > why I placed version reading originally after bcm43xx_initialize_irq(), > because I got strange values if I read the version directly after the > upload. Ok, that seems to be the problem. It's v3 firmware, but the driver is tuned to v4, because of the uncorrect rev value. I'll fix this. -- Greetings Michael. ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2006-10-03 15:14 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-10-02 16:43 Please pull bcm43xx-d80211 bugfixes and new features Michael Buesch
2006-10-03 3:44 ` Larry Finger
2006-10-03 11:58 ` Michael Buesch
[not found] ` <200610031358.33760.mb-fseUSCV1ubazQB+pC5nmwQ@public.gmane.org>
2006-10-03 12:36 ` Martin Langer
2006-10-03 13:05 ` Michael Buesch
2006-10-03 14:36 ` Larry Finger
[not found] ` <45227569.6070901-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
2006-10-03 14:48 ` Michael Buesch
2006-10-03 15:07 ` Larry Finger
2006-10-03 15:12 ` Martin Langer
2006-10-03 15:14 ` Michael Buesch
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).