netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Kok, Auke" <auke-jan.h.kok@intel.com>
To: "Garzik, Jeff" <jgarzik@pobox.com>
Cc: netdev@vger.kernel.org, "Brandeburg,
	Jesse" <jesse.brandeburg@intel.com>,
	"Kok, Auke" <auke-jan.h.kok@intel.com>,
	"Kok, Auke" <auke@foo-projects.org>,
	"Ronciak, John" <john.ronciak@intel.com>
Subject: [PATCH 1/8] e1000: FIX: don't poke at manageability registers for incompatible adapters
Date: Tue, 17 Oct 2006 12:02:34 -0700	[thread overview]
Message-ID: <20061017190234.4194.86732.stgit@gitlost.site> (raw)
In-Reply-To: <20061017190139.4194.20128.stgit@gitlost.site>


The MANC register should not be read for PCI-E adapters at all, as well as
82543 and older where 82543 would master abort when this register was
accessed.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
---

 drivers/net/e1000/e1000_ethtool.c |    3 ++-
 drivers/net/e1000/e1000_main.c    |   21 ++++++++++++++-------
 2 files changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 773821e..71fb278 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -461,7 +461,8 @@ e1000_get_regs(struct net_device *netdev
 	regs_buff[24] = (uint32_t)phy_data;  /* phy local receiver status */
 	regs_buff[25] = regs_buff[24];  /* phy remote receiver status */
 	if (hw->mac_type >= e1000_82540 &&
-	   hw->media_type == e1000_media_type_copper) {
+	    hw->mac_type < e1000_82571 &&
+	    hw->media_type == e1000_media_type_copper) {
 		regs_buff[26] = E1000_READ_REG(hw, MANC);
 	}
 }
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index ce0d35f..de3dced 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -699,7 +699,10 @@ e1000_reset(struct e1000_adapter *adapte
 		                    phy_data);
 	}
 
-	if ((adapter->en_mng_pt) && (adapter->hw.mac_type < e1000_82571)) {
+	if ((adapter->en_mng_pt) &&
+	    (adapter->hw.mac_type >= e1000_82540) &&
+	    (adapter->hw.mac_type < e1000_82571) &&
+	    (adapter->hw.media_type == e1000_media_type_copper)) {
 		manc = E1000_READ_REG(&adapter->hw, MANC);
 		manc |= (E1000_MANC_ARP_EN | E1000_MANC_EN_MNG2HOST);
 		E1000_WRITE_REG(&adapter->hw, MANC, manc);
@@ -1076,8 +1079,9 @@ e1000_remove(struct pci_dev *pdev)
 
 	flush_scheduled_work();
 
-	if (adapter->hw.mac_type < e1000_82571 &&
-	   adapter->hw.media_type == e1000_media_type_copper) {
+	if (adapter->hw.mac_type >= e1000_82540 &&
+	    adapter->hw.mac_type < e1000_82571 &&
+	    adapter->hw.media_type == e1000_media_type_copper) {
 		manc = E1000_READ_REG(&adapter->hw, MANC);
 		if (manc & E1000_MANC_SMBUS_EN) {
 			manc |= E1000_MANC_ARP_EN;
@@ -4773,8 +4777,9 @@ e1000_suspend(struct pci_dev *pdev, pm_m
 		pci_enable_wake(pdev, PCI_D3cold, 0);
 	}
 
-	if (adapter->hw.mac_type < e1000_82571 &&
-	   adapter->hw.media_type == e1000_media_type_copper) {
+	if (adapter->hw.mac_type >= e1000_82540 &&
+	    adapter->hw.mac_type < e1000_82571 &&
+	    adapter->hw.media_type == e1000_media_type_copper) {
 		manc = E1000_READ_REG(&adapter->hw, MANC);
 		if (manc & E1000_MANC_SMBUS_EN) {
 			manc |= E1000_MANC_ARP_EN;
@@ -4825,8 +4830,9 @@ e1000_resume(struct pci_dev *pdev)
 
 	netif_device_attach(netdev);
 
-	if (adapter->hw.mac_type < e1000_82571 &&
-	   adapter->hw.media_type == e1000_media_type_copper) {
+	if (adapter->hw.mac_type >= e1000_82540 &&
+	    adapter->hw.mac_type < e1000_82571 &&
+	    adapter->hw.media_type == e1000_media_type_copper) {
 		manc = E1000_READ_REG(&adapter->hw, MANC);
 		manc &= ~(E1000_MANC_ARP_EN);
 		E1000_WRITE_REG(&adapter->hw, MANC, manc);
@@ -4948,6 +4954,7 @@ static void e1000_io_resume(struct pci_d
 	netif_device_attach(netdev);
 
 	if (adapter->hw.mac_type >= e1000_82540 &&
+	    adapter->hw.mac_type < e1000_82571 &&
 	    adapter->hw.media_type == e1000_media_type_copper) {
 		manc = E1000_READ_REG(&adapter->hw, MANC);
 		manc &= ~(E1000_MANC_ARP_EN);



---
Auke Kok <auke-jan.h.kok@intel.com>

  reply	other threads:[~2006-10-17 18:53 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-10-17 19:01 [PATCH 0/8] e100, e1000: Fixes for netdev-2.6#upstream-fixes Kok, Auke
2006-10-17 19:02 ` Kok, Auke [this message]
2006-10-17 19:02 ` [PATCH 2/8] e1000: FIX: 82542 doesn't support WoL Kok, Auke
2006-10-17 19:02 ` [PATCH 3/8] e1000: FIX: fix wrong txdctl threshold bitmasks Kok, Auke
2006-10-17 19:02 ` [PATCH 4/8] e1000: FIX: disable LPE for IPV6, only enable for jumbo frames Kok, Auke
2006-10-17 19:02 ` [PATCH 5/8] e1000: FIX: Don't limit descriptor size to 4kb for PCI-E adapters Kok, Auke
2006-10-17 19:02 ` [PATCH 6/8] e1000: FIX: move length adjustment due to crc stripping disabled Kok, Auke
2006-10-17 19:02 ` [PATCH 7/8] e1000: Increment version to 7.2.9-k4 Kok, Auke
2006-10-17 19:02 ` [PATCH 8/8] e100: FIX: fix netconsole fast reboot attached to e100 Kok, Auke
2006-10-21 18:31 ` [PATCH 0/8] e100, e1000: Fixes for netdev-2.6#upstream-fixes Jeff Garzik
2006-10-23 15:13   ` Auke Kok
2006-10-24 21:43     ` please pull from git://lost.foo-projects.org/~ahkok/git/netdev-2.6 upstream-fixes Auke Kok

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20061017190234.4194.86732.stgit@gitlost.site \
    --to=auke-jan.h.kok@intel.com \
    --cc=auke@foo-projects.org \
    --cc=jesse.brandeburg@intel.com \
    --cc=jgarzik@pobox.com \
    --cc=john.ronciak@intel.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).