From: Stephen Hemminger <shemminger@osdl.org>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: netdev@vger.kernel.org
Subject: [PATCH 01/10] chelsio: whitespace fixes
Date: Fri, 01 Dec 2006 16:36:13 -0800 [thread overview]
Message-ID: <20061202003707.203984000@osdl.org> (raw)
In-Reply-To: 20061202003612.573260000@osdl.org
[-- Attachment #1: whitespace.patch --]
[-- Type: text/plain, Size: 2904 bytes --]
Fix indentation and blank/tab issues.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
---
drivers/net/chelsio/cxgb2.c | 2 +-
drivers/net/chelsio/espi.c | 2 +-
drivers/net/chelsio/pm3393.c | 16 ++++++++--------
drivers/net/chelsio/subr.c | 12 ++++++------
4 files changed, 16 insertions(+), 16 deletions(-)
--- chelsio.orig/drivers/net/chelsio/cxgb2.c
+++ chelsio/drivers/net/chelsio/cxgb2.c
@@ -729,7 +729,7 @@ static int get_coalesce(struct net_devic
static int get_eeprom_len(struct net_device *dev)
{
- return EEPROM_SIZE;
+ return EEPROM_SIZE;
}
#define EEPROM_MAGIC(ap) \
--- chelsio.orig/drivers/net/chelsio/espi.c
+++ chelsio/drivers/net/chelsio/espi.c
@@ -192,7 +192,7 @@ int t1_espi_intr_handler(struct peespi *
const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi)
{
- return &espi->intr_cnt;
+ return &espi->intr_cnt;
}
static void espi_setup_for_pm3393(adapter_t *adapter)
--- chelsio.orig/drivers/net/chelsio/pm3393.c
+++ chelsio/drivers/net/chelsio/pm3393.c
@@ -46,17 +46,17 @@
/* 802.3ae 10Gb/s MDIO Manageable Device(MMD)
*/
enum {
- MMD_RESERVED,
- MMD_PMAPMD,
- MMD_WIS,
- MMD_PCS,
- MMD_PHY_XGXS, /* XGMII Extender Sublayer */
- MMD_DTE_XGXS,
+ MMD_RESERVED,
+ MMD_PMAPMD,
+ MMD_WIS,
+ MMD_PCS,
+ MMD_PHY_XGXS, /* XGMII Extender Sublayer */
+ MMD_DTE_XGXS,
};
enum {
- PHY_XGXS_CTRL_1,
- PHY_XGXS_STATUS_1
+ PHY_XGXS_CTRL_1,
+ PHY_XGXS_STATUS_1
};
#define OFFSET(REG_ADDR) (REG_ADDR << 2)
--- chelsio.orig/drivers/net/chelsio/subr.c
+++ chelsio/drivers/net/chelsio/subr.c
@@ -166,11 +166,11 @@ static int t1_pci_intr_handler(adapter_t
{
u32 pcix_cause;
- pci_read_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, &pcix_cause);
+ pci_read_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, &pcix_cause);
if (pcix_cause) {
pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE,
- pcix_cause);
+ pcix_cause);
t1_fatal_err(adapter); /* PCI errors are fatal */
}
return 0;
@@ -420,9 +420,9 @@ int t1_link_start(struct cphy *phy, stru
*/
int elmer0_ext_intr_handler(adapter_t *adapter)
{
- struct cphy *phy;
+ struct cphy *phy;
int phy_cause;
- u32 cause;
+ u32 cause;
t1_tpi_read(adapter, A_ELMER0_INT_CAUSE, &cause);
@@ -515,7 +515,7 @@ void t1_interrupts_clear(adapter_t* adap
}
/* Enable interrupts for external devices. */
- pl_intr = readl(adapter->regs + A_PL_CAUSE);
+ pl_intr = readl(adapter->regs + A_PL_CAUSE);
writel(pl_intr | F_PL_INTR_EXT | F_PL_INTR_PCIX,
adapter->regs + A_PL_CAUSE);
@@ -643,7 +643,7 @@ static int board_init(adapter_t *adapter
case CHBT_BOARD_N110:
case CHBT_BOARD_N210:
writel(V_TPIPAR(0xf), adapter->regs + A_TPI_PAR);
- t1_tpi_write(adapter, A_ELMER0_GPO, 0x800);
+ t1_tpi_write(adapter, A_ELMER0_GPO, 0x800);
break;
}
return 0;
--
next prev parent reply other threads:[~2006-12-02 0:39 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-12-02 0:36 [PATCH 00/10] chelsio: 10G driver Stephen Hemminger
2006-12-02 0:36 ` Stephen Hemminger [this message]
2006-12-02 0:36 ` [PATCH 02/10] chelsio: use kzalloc Stephen Hemminger
2006-12-02 0:36 ` [PATCH 03/10] chelsio: remove unused mutex Stephen Hemminger
2006-12-02 0:36 ` [PATCH 05/10] chelsio: add 1G swcixw aupport Stephen Hemminger
2006-12-02 0:36 ` [PATCH 06/10] chelsio: cleanup pm3393 code Stephen Hemminger
2006-12-02 0:36 ` [PATCH 07/10] chelsio: use standard CRC routines Stephen Hemminger
2006-12-02 0:36 ` [PATCH 08/10] chelsio: add MSI support Stephen Hemminger
2006-12-02 0:36 ` [PATCH 09/10] chelsio: statistics improvement Stephen Hemminger
2006-12-02 0:36 ` [PATCH 10/10] chelesio: transmit locking (plus bug fix) Stephen Hemminger
2006-12-03 10:45 ` Eric Lemoine
2006-12-04 17:58 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061202003707.203984000@osdl.org \
--to=shemminger@osdl.org \
--cc=jgarzik@pobox.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).