From: Steve Wise <swise@opengridcomputing.com>
To: rdreier@cisco.com
Cc: netdev@vger.kernel.org, openib-general@openib.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 06/13] Completion Queues
Date: Sat, 02 Dec 2006 16:50:18 -0600 [thread overview]
Message-ID: <20061202225018.27014.78386.stgit@dell3.ogc.int> (raw)
In-Reply-To: <20061202224917.27014.15424.stgit@dell3.ogc.int>
Functions to manipulate CQs.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
---
drivers/infiniband/hw/cxgb3/iwch_cq.c | 231 +++++++++++++++++++++++++++++++++
1 files changed, 231 insertions(+), 0 deletions(-)
diff --git a/drivers/infiniband/hw/cxgb3/iwch_cq.c b/drivers/infiniband/hw/cxgb3/iwch_cq.c
new file mode 100644
index 0000000..9d82df4
--- /dev/null
+++ b/drivers/infiniband/hw/cxgb3/iwch_cq.c
@@ -0,0 +1,231 @@
+/*
+ * Copyright (c) 2006 Chelsio, Inc. All rights reserved.
+ * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include "iwch_provider.h"
+#include "iwch.h"
+
+/*
+ * Get one cq entry from cxio and map it to openib.
+ *
+ * Returns:
+ * 0 EMPTY;
+ * 1 cqe returned
+ * -EAGAIN caller must try again
+ * any other -errno fatal error
+ */
+int iwch_poll_cq_one(struct iwch_dev *rhp, struct iwch_cq *chp,
+ struct ib_wc *wc)
+{
+ struct iwch_qp *qhp = NULL;
+ struct t3_cqe cqe, *rd_cqe;
+ struct t3_wq *wq;
+ u32 credit = 0;
+ u8 cqe_flushed;
+ u64 cookie;
+ int ret = 1;
+
+ rd_cqe = cxio_next_cqe(&chp->cq);
+
+ if (!rd_cqe)
+ return 0;
+
+ qhp = get_qhp(rhp, CQE_QPID(*rd_cqe));
+ if (!qhp)
+ wq = NULL;
+ else {
+ spin_lock(&qhp->lock);
+ wq = &(qhp->wq);
+ }
+ ret = cxio_poll_cq(wq, &(chp->cq), &cqe, &cqe_flushed, &cookie,
+ &credit);
+ if (t3a_device(chp->rhp) && credit) {
+ PDBG("%s updating %d cq credits on id %d\n", __FUNCTION__,
+ credit, chp->cq.cqid);
+ cxio_hal_cq_op(&rhp->rdev, &chp->cq, CQ_CREDIT_UPDATE, credit);
+ }
+
+ if (ret) {
+ ret = -EAGAIN;
+ goto out;
+ }
+ ret = 1;
+
+ wc->wr_id = cookie;
+ wc->qp_num = qhp->wq.qpid;
+ wc->vendor_err = CQE_STATUS(cqe);
+
+ PDBG("%s qpid 0x%x type %d opcode %d status 0x%x wrid hi 0x%x "
+ "lo 0x%x cookie 0x%llx\n", __FUNCTION__,
+ CQE_QPID(cqe), CQE_TYPE(cqe),
+ CQE_OPCODE(cqe), CQE_STATUS(cqe), CQE_WRID_HI(cqe),
+ CQE_WRID_LOW(cqe), cookie);
+
+ if (CQE_TYPE(cqe) == 0) {
+ if (!CQE_STATUS(cqe))
+ wc->byte_len = CQE_LEN(cqe);
+ else
+ wc->byte_len = 0;
+ wc->opcode = IB_WC_RECV;
+ } else {
+ switch (CQE_OPCODE(cqe)) {
+ case T3_RDMA_WRITE:
+ wc->opcode = IB_WC_RDMA_WRITE;
+ break;
+ case T3_READ_REQ:
+ wc->opcode = IB_WC_RDMA_READ;
+ wc->byte_len = CQE_LEN(cqe);
+ break;
+ case T3_SEND:
+ case T3_SEND_WITH_SE:
+ wc->opcode = IB_WC_SEND;
+ break;
+ case T3_BIND_MW:
+ wc->opcode = IB_WC_BIND_MW;
+ break;
+
+ /* these aren't supported yet */
+ case T3_SEND_WITH_INV:
+ case T3_SEND_WITH_SE_INV:
+ case T3_LOCAL_INV:
+ case T3_FAST_REGISTER:
+ default:
+ printk(KERN_ERR MOD "Unexpected opcode %d "
+ "in the CQE received for QPID=0x%0x\n",
+ CQE_OPCODE(cqe), CQE_QPID(cqe));
+ ret = -EINVAL;
+ goto out;
+ }
+ }
+
+ if (cqe_flushed)
+ wc->status = IB_WC_WR_FLUSH_ERR;
+ else {
+
+ switch (CQE_STATUS(cqe)) {
+ case TPT_ERR_SUCCESS:
+ wc->status = IB_WC_SUCCESS;
+ break;
+ case TPT_ERR_STAG:
+ wc->status = IB_WC_LOC_ACCESS_ERR;
+ break;
+ case TPT_ERR_PDID:
+ wc->status = IB_WC_LOC_PROT_ERR;
+ break;
+ case TPT_ERR_QPID:
+ case TPT_ERR_ACCESS:
+ wc->status = IB_WC_LOC_ACCESS_ERR;
+ break;
+ case TPT_ERR_WRAP:
+ wc->status = IB_WC_GENERAL_ERR;
+ break;
+ case TPT_ERR_BOUND:
+ wc->status = IB_WC_LOC_LEN_ERR;
+ break;
+ case TPT_ERR_INVALIDATE_SHARED_MR:
+ case TPT_ERR_INVALIDATE_MR_WITH_MW_BOUND:
+ wc->status = IB_WC_MW_BIND_ERR;
+ break;
+ case TPT_ERR_CRC:
+ case TPT_ERR_MARKER:
+ case TPT_ERR_PDU_LEN_ERR:
+ case TPT_ERR_OUT_OF_RQE:
+ case TPT_ERR_DDP_VERSION:
+ case TPT_ERR_RDMA_VERSION:
+ case TPT_ERR_DDP_QUEUE_NUM:
+ case TPT_ERR_MSN:
+ case TPT_ERR_TBIT:
+ case TPT_ERR_MO:
+ case TPT_ERR_MSN_RANGE:
+ case TPT_ERR_IRD_OVERFLOW:
+ case TPT_ERR_OPCODE:
+ wc->status = IB_WC_FATAL_ERR;
+ break;
+ case TPT_ERR_SWFLUSH:
+ wc->status = IB_WC_WR_FLUSH_ERR;
+ break;
+ default:
+ printk(KERN_ERR MOD "Unexpected cqe_status 0x%x for "
+ "QPID=0x%0x\n", CQE_STATUS(cqe), CQE_QPID(cqe));
+ ret = -EINVAL;
+ }
+ }
+out:
+ if (wq)
+ spin_unlock(&qhp->lock);
+ return ret;
+}
+
+int iwch_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *wc)
+{
+ struct iwch_dev *rhp;
+ struct iwch_cq *chp;
+ unsigned long flags;
+ int npolled;
+ int err = 0;
+
+ chp = to_iwch_cq(ibcq);
+ rhp = chp->rhp;
+
+ spin_lock_irqsave(&chp->lock, flags);
+ for (npolled = 0; npolled < num_entries; ++npolled) {
+#ifdef DEBUG
+ int i=0;
+#endif
+
+ /*
+ * Because T3 can post CQEs that are _not_ associated
+ * with a WR, we might have to poll again after removing
+ * one of these.
+ */
+ do {
+ err = iwch_poll_cq_one(rhp, chp, wc + npolled);
+#ifdef DEBUG
+ BUG_ON(++i > 1000);
+#endif
+ } while (err == -EAGAIN);
+ if (err <= 0)
+ break;
+ }
+ spin_unlock_irqrestore(&chp->lock, flags);
+
+ if (err < 0)
+ return err;
+ else {
+ return npolled;
+ }
+}
+
+int iwch_modify_cq(struct ib_cq *cq, int cqe)
+{
+ PDBG("iwch_modify_cq: TBD\n");
+ return 0;
+}
next prev parent reply other threads:[~2006-12-02 22:50 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-12-02 22:49 [PATCH v2 00/13] 2.6.20 Chelsio T3 RDMA Driver Steve Wise
2006-12-02 22:49 ` [PATCH v2 01/13] Linux RDMA Core Changes Steve Wise
2006-12-02 22:49 ` [PATCH v2 02/13] Device Discovery and ULLD Linkage Steve Wise
2006-12-03 16:03 ` Jan Engelhardt
2006-12-02 22:49 ` [PATCH v2 03/13] Provider Methods and Data Structures Steve Wise
2006-12-03 12:07 ` Arjan van de Ven
2006-12-04 16:28 ` Steve Wise
2006-12-04 16:45 ` Roland Dreier
2006-12-04 16:50 ` Steve Wise
2006-12-02 22:49 ` [PATCH v2 04/13] Connection Manager Steve Wise
2006-12-04 11:08 ` Evgeniy Polyakov
2006-12-04 15:45 ` Roland Dreier
2006-12-04 16:20 ` Steve Wise
2006-12-05 5:13 ` Evgeniy Polyakov
2006-12-05 15:07 ` Steve Wise
2006-12-05 10:45 ` Brice Goglin
2006-12-05 16:02 ` Steve Wise
2006-12-05 16:27 ` [openib-general] " Steve Wise
2006-12-05 17:14 ` Roland Dreier
2006-12-05 5:07 ` Evgeniy Polyakov
2006-12-05 5:13 ` Roland Dreier
2006-12-05 5:16 ` Evgeniy Polyakov
2006-12-05 5:27 ` Roland Dreier
2006-12-05 15:14 ` Steve Wise
2006-12-05 15:27 ` Evgeniy Polyakov
2006-12-05 15:46 ` Steve Wise
2006-12-05 15:03 ` Steve Wise
2006-12-05 15:02 ` Steve Wise
2006-12-05 15:19 ` Evgeniy Polyakov
2006-12-05 15:39 ` Steve Wise
2006-12-05 15:59 ` Evgeniy Polyakov
2006-12-05 16:12 ` Steve Wise
2006-12-05 16:17 ` [openib-general] " Steve Wise
2006-12-05 16:31 ` Evgeniy Polyakov
2006-12-05 16:47 ` Steve Wise
2006-12-05 17:26 ` Evgeniy Polyakov
2006-12-05 17:32 ` Evgeniy Polyakov
2006-12-05 17:51 ` Steve Wise
2006-12-05 18:09 ` Evgeniy Polyakov
2006-12-06 1:27 ` [openib-general] " Michael Krause
2006-12-02 22:50 ` [PATCH v2 05/13] Queue Pairs Steve Wise
2006-12-02 22:50 ` Steve Wise [this message]
2006-12-02 22:50 ` [PATCH v2 07/13] Async Event Handler Steve Wise
2006-12-02 22:50 ` [PATCH v2 08/13] Memory Registration Steve Wise
2006-12-02 22:50 ` [PATCH v2 09/13] Core WQE/CQE Types Steve Wise
2006-12-02 22:50 ` [PATCH v2 10/13] Core HAL Steve Wise
2006-12-02 22:51 ` [PATCH v2 11/13] Core Resource Allocation Steve Wise
2006-12-02 22:51 ` [PATCH v2 12/13] Core Debug functions Steve Wise
2006-12-02 22:51 ` [PATCH v2 13/13] Kconfig/Makefile Steve Wise
2006-12-02 23:13 ` [PATCH v2 00/13] 2.6.20 Chelsio T3 RDMA Driver Francois Romieu
2006-12-03 0:24 ` Stephen Hemminger
2006-12-04 16:24 ` Steve Wise
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061202225018.27014.78386.stgit@dell3.ogc.int \
--to=swise@opengridcomputing.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=openib-general@openib.org \
--cc=rdreier@cisco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).