* [PATCH 19/26] rt2x00: Fix channel_change_time calculation
@ 2006-12-03 18:18 Ivo van Doorn
0 siblings, 0 replies; only message in thread
From: Ivo van Doorn @ 2006-12-03 18:18 UTC (permalink / raw)
To: John W. Linville; +Cc: netdev
Correctly initialize the channel_change_time.
Make sure that channel is reset afterwards,
otherwise the channel is not correctly initialized
and rx/tx will fail.
Signed-off-by Ivo van Doorn <IvDoorn@gmail.com>
---
diff -rU3 wireless-dev-mac/drivers/net/wireless/d80211/rt2x00/rt2400pci.c wireless-dev-channel/drivers/net/wireless/d80211/rt2x00/rt2400pci.c
--- wireless-dev-mac/drivers/net/wireless/d80211/rt2x00/rt2400pci.c 2006-12-03 14:45:46.000000000 +0100
+++ wireless-dev-channel/drivers/net/wireless/d80211/rt2x00/rt2400pci.c 2006-12-03 14:52:04.000000000 +0100
@@ -1124,6 +1124,19 @@
unsigned long jiffies_end;
/*
+ * Only initialize the channel_change_time
+ * if it has not been set previously.
+ */
+ if (rt2x00dev->hw->channel_change_time)
+ return 0;
+
+ /*
+ * Invalidate the rx_params.channel value to make sure
+ * the config channel will be correctly executed.
+ */
+ rt2x00dev->rx_params.channel = 0;
+
+ /*
* Determine channel_change_time
* by measuring the time it takes
* to switch the channel.
@@ -1171,10 +1184,11 @@
}
/*
- * Determine channel change time.
+ * Reset the channel_change_time value
+ * to make sure it will be correctly initialized
+ * after the radio has been enabled.
*/
- if (rt2400pci_init_channel_time(rt2x00dev))
- goto exit_fail;
+ rt2x00dev->hw->channel_change_time = 0;
/*
* Register interrupt handler.
diff -rU3 wireless-dev-mac/drivers/net/wireless/d80211/rt2x00/rt2500pci.c wireless-dev-channel/drivers/net/wireless/d80211/rt2x00/rt2500pci.c
--- wireless-dev-mac/drivers/net/wireless/d80211/rt2x00/rt2500pci.c 2006-12-03 14:46:09.000000000 +0100
+++ wireless-dev-channel/drivers/net/wireless/d80211/rt2x00/rt2500pci.c 2006-12-03 14:52:32.000000000 +0100
@@ -1248,6 +1248,19 @@
unsigned long jiffies_end;
/*
+ * Only initialize the channel_change_time
+ * if it has not been set previously.
+ */
+ if (rt2x00dev->hw->channel_change_time)
+ return 0;
+
+ /*
+ * Invalidate the rx_params.channel value to make sure
+ * the config channel will be correctly executed.
+ */
+ rt2x00dev->rx_params.channel = 0;
+
+ /*
* Determine channel_change_time
* by measuring the time it takes
* to switch the channel.
@@ -1296,10 +1309,11 @@
}
/*
- * Determine channel change time.
+ * Reset the channel_change_time value
+ * to make sure it will be correctly initialized
+ * after the radio has been enabled.
*/
- if (rt2500pci_init_channel_time(rt2x00dev))
- goto exit_fail;
+ rt2x00dev->hw->channel_change_time = 0;
/*
* Register interrupt handler.
diff -rU3 wireless-dev-mac/drivers/net/wireless/d80211/rt2x00/rt2500usb.c wireless-dev-channel/drivers/net/wireless/d80211/rt2x00/rt2500usb.c
--- wireless-dev-mac/drivers/net/wireless/d80211/rt2x00/rt2500usb.c 2006-12-03 14:46:19.000000000 +0100
+++ wireless-dev-channel/drivers/net/wireless/d80211/rt2x00/rt2500usb.c 2006-12-03 14:52:36.000000000 +0100
@@ -1214,6 +1214,19 @@
unsigned long jiffies_end;
/*
+ * Only initialize the channel_change_time
+ * if it has not been set previously.
+ */
+ if (rt2x00dev->hw->channel_change_time)
+ return 0;
+
+ /*
+ * Invalidate the rx_params.channel value to make sure
+ * the config channel will be correctly executed.
+ */
+ rt2x00dev->rx_params.channel = 0;
+
+ /*
* Determine channel_change_time
* by measuring the time it takes
* to switch the channel.
@@ -1262,10 +1275,11 @@
}
/*
- * Determine channel change time.
+ * Reset the channel_change_time value
+ * to make sure it will be correctly initialized
+ * after the radio has been enabled.
*/
- if (rt2500usb_init_channel_time(rt2x00dev))
- goto exit_fail;
+ rt2x00dev->hw->channel_change_time = 0;
SET_FLAG(rt2x00dev, DEVICE_INITIALIZED);
diff -rU3 wireless-dev-mac/drivers/net/wireless/d80211/rt2x00/rt61pci.c wireless-dev-channel/drivers/net/wireless/d80211/rt2x00/rt61pci.c
--- wireless-dev-mac/drivers/net/wireless/d80211/rt2x00/rt61pci.c 2006-12-03 14:46:31.000000000 +0100
+++ wireless-dev-channel/drivers/net/wireless/d80211/rt2x00/rt61pci.c 2006-12-03 14:52:40.000000000 +0100
@@ -1681,6 +1681,19 @@
unsigned long jiffies_end;
/*
+ * Only initialize the channel_change_time
+ * if it has not been set previously.
+ */
+ if (rt2x00dev->hw->channel_change_time)
+ return 0;
+
+ /*
+ * Invalidate the rx_params.channel value to make sure
+ * the config channel will be correctly executed.
+ */
+ rt2x00dev->rx_params.channel = 0;
+
+ /*
* Determine channel_change_time
* by measuring the time it takes
* to switch the channel.
@@ -1736,10 +1749,11 @@
}
/*
- * Determine channel change time.
+ * Reset the channel_change_time value
+ * to make sure it will be correctly initialized
+ * after the radio has been enabled.
*/
- if (rt61pci_init_channel_time(rt2x00dev))
- goto exit_fail;
+ rt2x00dev->hw->channel_change_time = 0;
/*
* Register interrupt handler.
diff -rU3 wireless-dev-mac/drivers/net/wireless/d80211/rt2x00/rt73usb.c wireless-dev-channel/drivers/net/wireless/d80211/rt2x00/rt73usb.c
--- wireless-dev-mac/drivers/net/wireless/d80211/rt2x00/rt73usb.c 2006-12-03 14:46:42.000000000 +0100
+++ wireless-dev-channel/drivers/net/wireless/d80211/rt2x00/rt73usb.c 2006-12-03 14:52:44.000000000 +0100
@@ -1463,6 +1463,19 @@
unsigned long jiffies_end;
/*
+ * Only initialize the channel_change_time
+ * if it has not been set previously.
+ */
+ if (rt2x00dev->hw->channel_change_time)
+ return 0;
+
+ /*
+ * Invalidate the rx_params.channel value to make sure
+ * the config channel will be correctly executed.
+ */
+ rt2x00dev->rx_params.channel = 0;
+
+ /*
* Determine channel_change_time
* by measuring the time it takes
* to switch the channel.
@@ -1518,10 +1531,11 @@
}
/*
- * Determine channel change time.
+ * Reset the channel_change_time value
+ * to make sure it will be correctly initialized
+ * after the radio has been enabled.
*/
- if (rt73usb_init_channel_time(rt2x00dev))
- goto exit_fail;
+ rt2x00dev->hw->channel_change_time = 0;
SET_FLAG(rt2x00dev, DEVICE_INITIALIZED);
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-12-03 18:19 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-12-03 18:18 [PATCH 19/26] rt2x00: Fix channel_change_time calculation Ivo van Doorn
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).