From: "Kok, Auke" <auke-jan.h.kok@intel.com>
To: "Garzik, Jeff" <jgarzik@pobox.com>
Cc: netdev@vger.kernel.org, "Brandeburg,
Jesse" <jesse.brandeburg@intel.com>,
"Kok, Auke" <auke-jan.h.kok@intel.com>,
"Kok, Auke" <auke@foo-projects.org>,
"Ronciak, John" <john.ronciak@intel.com>
Subject: [PATCH 03/22] ixgb: Write RA register high word first, increment version
Date: Fri, 08 Dec 2006 15:02:51 -0800 [thread overview]
Message-ID: <20061208230250.30109.60518.stgit@gitlost.site> (raw)
In-Reply-To: <20061208230209.30109.49157.stgit@gitlost.site>
We need to disable the AV bit before flushing the low register.
Signed-off-by: <aaron.k.salter@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
---
drivers/net/ixgb/ixgb_hw.c | 3 ++-
drivers/net/ixgb/ixgb_main.c | 2 +-
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ixgb/ixgb_hw.c b/drivers/net/ixgb/ixgb_hw.c
index 02089b6..ecbf458 100644
--- a/drivers/net/ixgb/ixgb_hw.c
+++ b/drivers/net/ixgb/ixgb_hw.c
@@ -399,8 +399,9 @@ ixgb_init_rx_addrs(struct ixgb_hw *hw)
/* Zero out the other 15 receive addresses. */
DEBUGOUT("Clearing RAR[1-15]\n");
for(i = 1; i < IXGB_RAR_ENTRIES; i++) {
- IXGB_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
+ /* Write high reg first to disable the AV bit first */
IXGB_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
+ IXGB_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
}
return;
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index 9522d5e..d70accb 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -36,7 +36,7 @@ static char ixgb_driver_string[] = "Inte
#else
#define DRIVERNAPI "-NAPI"
#endif
-#define DRV_VERSION "1.0.117-k2"DRIVERNAPI
+#define DRV_VERSION "1.0.126-k2"DRIVERNAPI
char ixgb_driver_version[] = DRV_VERSION;
static char ixgb_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
---
Auke Kok <auke-jan.h.kok@intel.com>
next prev parent reply other threads:[~2006-12-08 22:52 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-12-08 23:02 [PATCH 00/22] ixgb, e1000 fixes Kok, Auke
2006-12-08 23:02 ` [PATCH 01/22] e1000: Fix early TSO completion Kok, Auke
2006-12-11 14:36 ` Jeff Garzik
2006-12-08 23:02 ` [PATCH 02/22] ixgb: Maybe stop TX if not enough free descriptors Kok, Auke
2006-12-11 14:37 ` Jeff Garzik
2006-12-08 23:02 ` Kok, Auke [this message]
2006-12-11 14:37 ` [PATCH 03/22] ixgb: Write RA register high word first, increment version Jeff Garzik
2006-12-08 23:02 ` [PATCH 04/22] e1000: display FC link properties Kok, Auke
2006-12-08 23:02 ` [PATCH 05/22] e1000: dynamic itr code fixes Kok, Auke
2006-12-08 23:02 ` [PATCH 06/22] e1000: minor tso ipv6 cleanups Kok, Auke
2006-12-11 14:42 ` Jeff Garzik
2006-12-08 23:02 ` [PATCH 07/22] e1000: omit stats for broken counter in 82543 Kok, Auke
2006-12-11 14:42 ` Jeff Garzik
2006-12-08 23:03 ` [PATCH 08/22] e1000: Fix all manageability workarounds Kok, Auke
2006-12-11 14:41 ` Jeff Garzik
2006-12-08 23:03 ` [PATCH 09/22] e1000: Fix PBA allocation calculations Kok, Auke
2006-12-08 23:03 ` [PATCH 10/22] e1000: Make copybreak parameter changeable by user Kok, Auke
2006-12-08 23:03 ` [PATCH 11/22] e1000: Fire a link even interrupt instead of a watchdog at init Kok, Auke
2006-12-11 22:48 ` Shaw Vrana
2006-12-08 23:03 ` [PATCH 12/22] e1000: Fix powerdown link loss when forced to gig speed Kok, Auke
2006-12-11 14:46 ` Jeff Garzik
2006-12-08 23:03 ` [PATCH 13/22] e1000: disable TSO when debugging slab Kok, Auke
2006-12-11 14:47 ` Jeff Garzik
2006-12-15 2:42 ` Herbert Xu
2006-12-08 23:03 ` [PATCH 14/22] e1000: always turn on receives on esb2 Kok, Auke
2006-12-11 14:47 ` Jeff Garzik
2006-12-08 23:03 ` [PATCH 15/22] e1000: simplify msi specific interrupt handler Kok, Auke
2006-12-11 14:48 ` Jeff Garzik
2006-12-08 23:03 ` [PATCH 16/22] e1000: Rewrite parm handling code to warn when forcing autoneg to gig only Kok, Auke
2006-12-08 23:03 ` [PATCH 17/22] e1000: set max frame size before enabling new link settings Kok, Auke
2006-12-08 23:03 ` [PATCH 18/22] e1000: For older adapters, we know that the pci bus type is pci Kok, Auke
2006-12-08 23:03 ` [PATCH 19/22] e1000: Don't set tipg (fiber) timings for pci-e adapters to fix fiber output Kok, Auke
2006-12-08 23:03 ` [PATCH 20/22] e1000: Fix poor quad port performance with NAPI Kok, Auke
2006-12-11 14:49 ` Jeff Garzik
2006-12-08 23:03 ` [PATCH 21/22] e1000: Version increment 7.3.20-k2 and minor cleanups Kok, Auke
2006-12-11 14:50 ` Jeff Garzik
2006-12-08 23:03 ` [PATCH 22/22] # This series applies on GIT commit 0ae851352a87db3f829511816a2da227860bf585 Kok, Auke
-- strict thread matches above, loose matches on Subject: below --
2006-12-11 22:07 [PATCH 03/22] ixgb: Write RA register high word first, increment version Brandeburg, Jesse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061208230250.30109.60518.stgit@gitlost.site \
--to=auke-jan.h.kok@intel.com \
--cc=auke@foo-projects.org \
--cc=jesse.brandeburg@intel.com \
--cc=jgarzik@pobox.com \
--cc=john.ronciak@intel.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).