* d80211 deadlock with wpa_supplicant and rmmod
@ 2006-12-31 21:18 Michael Buesch
0 siblings, 0 replies; 8+ messages in thread
From: Michael Buesch @ 2006-12-31 21:18 UTC (permalink / raw)
To: Jiri Benc; +Cc: John Linville, netdev, bcm43xx-dev
I believe we have a deadlock in d80211.
The following triggers it on my 2way SMT machine with preempt.
modprobe bcm43xx-d80211
add sta0
ifconfig sta0 up
start wpa_supplicant on the interface
rmmod bcm43xx-d80211
After that rmmod hangs spinning and wpa_supplicant
stays in D state.
If I first kill wpa_supplicant and then rmmod the module,
it does not deadlock.
Below is sysrq-t output. It looks like it's related to rtnl_mutex.
[ 0.000000] Linux version 2.6.19-rc6 (mb@prescott) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #1 SMP PREEMPT Sun Dec 31 21:29:46 CET 2006
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f5f20
[ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262128
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262128
[ 0.000000] On node 0 totalpages: 262128
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32497 pages, LIFO batch:7
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP (v000 IntelR ) @ 0x000f7ae0
[ 0.000000] ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
[ 0.000000] ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
[ 0.000000] ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff7240
[ 0.000000] ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:3 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:3 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[ 0.000000] Detected 2793.090 MHz processor.
[ 20.144782] Built 1 zonelists. Total pages: 260081
[ 20.144785] Kernel command line: root=/dev/sda4 ro
[ 20.144955] mapped APIC to ffffd000 (fee00000)
[ 20.144958] mapped IOAPIC to ffffc000 (fec00000)
[ 20.144961] Enabling fast FPU save and restore... done.
[ 20.144965] Enabling unmasked SIMD FPU exception support... done.
[ 20.144970] Initializing CPU#0
[ 20.145111] CPU 0 irqstacks, hard=c052b000 soft=c0529000
[ 20.145115] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 20.146618] Console: colour VGA+ 80x25
[ 20.148585] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 20.148648] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 20.148698] ... MAX_LOCK_DEPTH: 30
[ 20.148747] ... MAX_LOCKDEP_KEYS: 2048
[ 20.148797] ... CLASSHASH_SIZE: 1024
[ 20.148847] ... MAX_LOCKDEP_ENTRIES: 8192
[ 20.148896] ... MAX_LOCKDEP_CHAINS: 8192
[ 20.148946] ... CHAINHASH_SIZE: 4096
[ 20.148996] memory used by lock dependency info: 904 kB
[ 20.149046] per task-struct memory footprint: 1200 bytes
[ 20.149098] ------------------------
[ 20.149270] | Locking API testsuite:
[ 20.149320] ----------------------------------------------------------------------------
[ 20.149382] | spin |wlock |rlock |mutex | wsem | rsem |
[ 20.149445] --------------------------------------------------------------------------
[ 20.149516] A-A deadlock: ok | ok | ok | ok | ok | ok |
[ 20.150473] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
[ 20.151757] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
[ 20.153398] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
[ 20.155014] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 20.156972] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 20.158929] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 20.160888] double unlock: ok | ok | ok | ok | ok | ok |
[ 20.161851] initialize held: ok | ok | ok | ok | ok | ok |
[ 20.162792] bad unlock order: ok | ok | ok | ok | ok | ok |
[ 20.164067] --------------------------------------------------------------------------
[ 20.164130] recursive read-lock: | ok | | ok |
[ 20.164581] recursive read-lock #2: | ok | | ok |
[ 20.165032] mixed read-write-lock: | ok | | ok |
[ 20.165540] mixed write-read-lock: | ok | | ok |
[ 20.166033] --------------------------------------------------------------------------
[ 20.166096] hard-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 20.166620] soft-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 20.167169] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 20.167718] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 20.168266] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 20.168809] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 20.169361] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 20.169883] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 20.170435] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 20.170978] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 20.171529] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 20.172237] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 20.172950] hard-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 20.173671] soft-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 20.174376] hard-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 20.175077] soft-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 20.175781] hard-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 20.176415] soft-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 20.177088] hard-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 20.177651] soft-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 20.178236] hard-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 20.178866] soft-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 20.179523] hard-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 20.180161] soft-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 20.180832] hard-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 20.181460] soft-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 20.182130] hard-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 20.182763] soft-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 20.183433] hard-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 20.184020] soft-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 20.184644] hard-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 20.185261] soft-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 20.185931] hard-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 20.186518] soft-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 20.187143] hard-irq lock-inversion/123: ok | ok | ok |
[ 20.187776] soft-irq lock-inversion/123: ok | ok | ok |
[ 20.188451] hard-irq lock-inversion/132: ok | ok | ok |
[ 20.189076] soft-irq lock-inversion/132: ok | ok | ok |
[ 20.189749] hard-irq lock-inversion/213: ok | ok | ok |
[ 20.190387] soft-irq lock-inversion/213: ok | ok | ok |
[ 20.191058] hard-irq lock-inversion/231: ok | ok | ok |
[ 20.191649] soft-irq lock-inversion/231: ok | ok | ok |
[ 20.192279] hard-irq lock-inversion/312: ok | ok | ok |
[ 20.192894] soft-irq lock-inversion/312: ok | ok | ok |
[ 20.193583] hard-irq lock-inversion/321: ok | ok | ok |
[ 20.194176] soft-irq lock-inversion/321: ok | ok | ok |
[ 20.194804] hard-irq read-recursion/123: ok |
[ 20.195071] soft-irq read-recursion/123: ok |
[ 20.195348] hard-irq read-recursion/132: ok |
[ 20.195615] soft-irq read-recursion/132: ok |
[ 20.195893] hard-irq read-recursion/213: ok |
[ 20.196158] soft-irq read-recursion/213: ok |
[ 20.196435] hard-irq read-recursion/231: ok |
[ 20.196701] soft-irq read-recursion/231: ok |
[ 20.196979] hard-irq read-recursion/312: ok |
[ 20.197260] soft-irq read-recursion/312: ok |
[ 20.197538] hard-irq read-recursion/321: ok |
[ 20.197804] soft-irq read-recursion/321: ok |
[ 20.198080] -------------------------------------------------------
[ 20.198133] Good, all 218 testcases passed! |
[ 20.198182] ---------------------------------
[ 20.198552] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 20.198975] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 20.255687] Memory: 1031268k/1048512k available (2539k kernel code, 16680k reserved, 1094k data, 204k init, 131008k highmem)
[ 20.255770] virtual kernel memory layout:
[ 20.255771] fixmap : 0xfff81000 - 0xfffff000 ( 504 kB)
[ 20.255773] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 20.255774] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 20.255775] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 20.255777] .init : 0xc04f1000 - 0xc0524000 ( 204 kB)
[ 20.255778] .data : 0xc037acba - 0xc048c58c (1094 kB)
[ 20.255779] .text : 0xc0100000 - 0xc037acba (2539 kB)
[ 20.256171] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 20.336802] Calibrating delay using timer specific routine.. 5594.21 BogoMIPS (lpj=11188430)
[ 20.337656] Mount-cache hash table entries: 512
[ 20.340488] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000041d 00000000 00000000
[ 20.340500] monitor/mwait feature present.
[ 20.340550] using mwait in idle threads.
[ 20.340605] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 20.340691] CPU: L2 cache: 1024K
[ 20.340740] CPU: Physical Processor ID: 0
[ 20.340804] CPU: After all inits, caps: bfebfbf7 00000000 00000000 00000180 0000041d 00000000 00000000
[ 20.340815] Intel machine check architecture supported.
[ 20.340871] Intel machine check reporting enabled on CPU#0.
[ 20.340923] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
[ 20.340977] CPU0: Thermal monitoring enabled
[ 20.341052] Checking 'hlt' instruction... OK.
[ 20.356965] Freeing SMP alternatives: 12k freed
[ 20.357017] ACPI: Core revision 20060707
[ 20.376829] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 03
[ 20.376959] lockdep: not fixing up alternatives.
[ 20.377230] Booting processor 1/1 eip 2000
[ 20.377282] CPU 1 irqstacks, hard=c052c000 soft=c052a000
[ 20.387794] Initializing CPU#1
[ 20.464584] Calibrating delay using timer specific routine.. 5586.40 BogoMIPS (lpj=11172817)
[ 20.464595] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000041d 00000000 00000000
[ 20.464605] monitor/mwait feature present.
[ 20.464613] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 20.464617] CPU: L2 cache: 1024K
[ 20.464620] CPU: Physical Processor ID: 0
[ 20.464623] CPU: After all inits, caps: bfebfbf7 00000000 00000000 00000180 0000041d 00000000 00000000
[ 20.464633] Intel machine check architecture supported.
[ 20.464641] Intel machine check reporting enabled on CPU#1.
[ 20.464644] CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
[ 20.464649] CPU1: Thermal monitoring enabled
[ 20.464978] CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 03
[ 20.466323] Total of 2 processors activated (11180.62 BogoMIPS).
[ 20.466534] ENABLING IO-APIC IRQs
[ 20.466858] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 20.612348] checking TSC synchronization across 2 CPUs: passed.
[ 0.007952] Brought up 2 CPUs
[ 0.145861] migration_cost=282
[ 0.151160] NET: Registered protocol family 16
[ 0.152829] ACPI: bus type pci registered
[ 0.166369] PCI: PCI BIOS revision 2.10 entry at 0xfba70, last bus=2
[ 0.166422] PCI: Using configuration type 1
[ 0.166472] Setting up standard PCI resources
[ 0.220382] ACPI: Interpreter enabled
[ 0.220438] ACPI: Using IOAPIC for interrupt routing
[ 0.226258] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.226373] PCI: Probing PCI hardware (bus 00)
[ 0.244561] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[ 0.244619] PCI quirk: region 0480-04bf claimed by ICH4 GPIO
[ 0.244779] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[ 0.245900] Boot video device is 0000:01:00.0
[ 0.247361] PCI: Transparent bridge - 0000:00:1e.0
[ 0.247520] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.316806] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.348809] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.351126] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 0.353760] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.356022] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.358482] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.361130] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.363543] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.365872] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.369049] intel_rng: FWH not detected
[ 0.371730] SCSI subsystem initialized
[ 0.372098] libata version 2.00 loaded.
[ 0.372606] PCI: Using ACPI for IRQ routing
[ 0.372658] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.399635] PCI: Bridge: 0000:00:01.0
[ 0.399686] IO window: disabled.
[ 0.399742] MEM window: f8000000-f9ffffff
[ 0.399797] PREFETCH window: e8000000-f7ffffff
[ 0.399854] PCI: Bridge: 0000:00:1e.0
[ 0.399906] IO window: a000-afff
[ 0.399962] MEM window: fa000000-fa0fffff
[ 0.400016] PREFETCH window: disabled.
[ 0.400094] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.400425] NET: Registered protocol family 2
[ 0.451633] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.452573] TCP established hash table entries: 65536 (order: 9, 2359296 bytes)
[ 0.464934] TCP bind hash table entries: 32768 (order: 8, 1179648 bytes)
[ 0.471066] TCP: Hash tables configured (established 65536 bind 32768)
[ 0.471241] TCP reno registered
[ 0.476384] Machine check exception polling timer started.
[ 0.485359] Initializing RT-Tester: OK
[ 0.485916] highmem bounce pool size: 64 pages
[ 0.489381] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.491268] io scheduler noop registered
[ 0.491487] io scheduler cfq registered (default)
[ 0.834417] Real Time Clock Driver v1.12ac
[ 0.835432] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 0.836452] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.842435] Floppy drive(s): fd0 is 1.44M
[ 0.866402] FDC 0 is a post-1991 82077
[ 0.873560] loop: loaded (max 8 devices)
[ 0.875529] netconsole: not configured, aborting
[ 0.875586] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 0.875641] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 0.875933] ICH5: IDE controller at PCI slot 0000:00:1f.1
[ 0.876005] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
[ 0.876116] ICH5: chipset revision 2
[ 0.876166] ICH5: not 100% native mode: will probe irqs later
[ 0.876230] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
[ 0.876384] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
[ 0.876535] Probing IDE interface ide0...
[ 1.457516] Probing IDE interface ide1...
[ 2.196401] hdc: CD-W54E, ATAPI CD/DVD-ROM drive
[ 2.536171] ide1 at 0x170-0x177,0x376 on irq 15
[ 2.539071] hdc: ATAPI 32X CD-ROM CD-R/RW drive, 1280kB Cache, DMA
[ 2.539373] Uniform CD-ROM driver Revision: 3.20
[ 2.542921] ata_piix 0000:00:1f.2: version 2.00ac6
[ 2.542930] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 2.543173] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 16
[ 2.543306] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 2.543689] ata1: SATA max UDMA/133 cmd 0xC000 ctl 0xC402 bmdma 0xD000 irq 16
[ 2.543902] ata2: SATA max UDMA/133 cmd 0xC800 ctl 0xCC02 bmdma 0xD008 irq 16
[ 2.543979] scsi0 : ata_piix
[ 2.705555] ata1.00: ATA-7, max UDMA7, 312581808 sectors: LBA48
[ 2.705609] ata1.00: ata1: dev 0 multi count 16
[ 2.707838] ata1.00: configured for UDMA/133
[ 2.707908] scsi1 : ata_piix
[ 2.877847] ATA: abnormal status 0x7F on port 0xC807
[ 2.880356] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP1614C SW10 PQ: 0 ANSI: 5
[ 2.883750] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[ 2.883884] sda: Write Protect is off
[ 2.883938] sda: Mode Sense: 00 3a 00 00
[ 2.884107] SCSI device sda: drive cache: write back
[ 2.886440] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[ 2.886586] sda: Write Protect is off
[ 2.886639] sda: Mode Sense: 00 3a 00 00
[ 2.886836] SCSI device sda: drive cache: write back
[ 2.887598] sda: sda1 sda2 sda3 sda4
[ 2.916511] sd 0:0:0:0: Attached scsi disk sda
[ 2.919180] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.923145] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.923351] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.926072] mice: PS/2 mouse device common for all mice
[ 2.950869] abituguru: testing bank1 sensor 0
[ 2.975418] abituguru: alarm not raised during volt sensor test
[ 3.027849] abituguru: found temp sensor
[ 3.028793] abituguru: testing bank1 sensor 1
[ 3.051307] abituguru: alarm not raised during volt sensor test
[ 3.103651] abituguru: found temp sensor
[ 3.104599] abituguru: testing bank1 sensor 3
[ 3.127671] abituguru: found volt sensor
[ 3.128619] abituguru: testing bank1 sensor 4
[ 3.151598] abituguru: found volt sensor
[ 3.152548] abituguru: testing bank1 sensor 10
[ 3.175084] abituguru: alarm not raised during volt sensor test
[ 3.227014] abituguru: alarm not raised during temp sensor test
[ 3.227957] abituguru: testing bank1 sensor 8
[ 3.250958] abituguru: alarm not raised during volt sensor test
[ 3.302894] abituguru: alarm not raised during temp sensor test
[ 3.303840] abituguru: testing bank1 sensor 14
[ 3.326883] abituguru: alarm not raised during volt sensor test
[ 3.378720] abituguru: alarm not raised during temp sensor test
[ 3.379659] abituguru: testing bank1 sensor 2
[ 3.403167] abituguru: found volt sensor
[ 3.404112] abituguru: testing bank1 sensor 9
[ 3.426693] abituguru: alarm not raised during volt sensor test
[ 3.478583] abituguru: alarm not raised during temp sensor test
[ 3.479531] abituguru: testing bank1 sensor 6
[ 3.503024] abituguru: found volt sensor
[ 3.503972] abituguru: testing bank1 sensor 5
[ 3.527009] abituguru: found volt sensor
[ 3.527957] abituguru: testing bank1 sensor 11
[ 3.550472] abituguru: alarm not raised during volt sensor test
[ 3.602341] abituguru: alarm not raised during temp sensor test
[ 3.603282] abituguru: testing bank1 sensor 15
[ 3.626372] abituguru: alarm not raised during volt sensor test
[ 3.678221] abituguru: alarm not raised during temp sensor test
[ 3.679170] abituguru: testing bank1 sensor 13
[ 3.702194] abituguru: alarm not raised during volt sensor test
[ 3.754113] abituguru: alarm not raised during temp sensor test
[ 3.755060] abituguru: testing bank1 sensor 7
[ 3.778091] abituguru: alarm not raised during volt sensor test
[ 3.829984] abituguru: alarm not raised during temp sensor test
[ 3.830930] abituguru: testing bank1 sensor 12
[ 3.853946] abituguru: alarm not raised during volt sensor test
[ 3.905848] abituguru: alarm not raised during temp sensor test
[ 3.906456] abituguru: detecting number of fan sensors
[ 3.906459] abituguru: bank2 sensor 0 does not seem to be a fan sensor: the threshold (0) is below the minimum (5)
[ 3.906462] abituguru: found: 0 fan sensors
[ 3.906464] abituguru: detecting number of PWM outputs
[ 3.906467] abituguru: pwm channel 2 does not seem to be a pwm channel: 15 is not a valid temp sensor address
[ 3.906470] abituguru: found: 2 PWM outputs
[ 3.906475] abituguru: found Abit uGuru
[ 3.908174] Advanced Linux Sound Architecture Driver Version 1.0.13 (Sun Oct 22 08:56:16 2006 UTC).
[ 3.915771] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 22 (level, low) -> IRQ 17
[ 3.920493] Installing spdif_bug patch: Audigy 2 ZS [SB0350]
[ 4.004265] ALSA device list:
[ 4.004321] #0: Audigy 2 ZS [SB0350] (rev.4, serial:0x20021102) at 0xa400, irq 17
[ 4.004671] TCP cubic registered
[ 4.004785] NET: Registered protocol family 1
[ 4.005311] NET: Registered protocol family 8
[ 4.005363] NET: Registered protocol family 20
[ 4.006630] Starting balanced_irq
[ 4.006705] Using IPI Shortcut mode
[ 4.009301] Time: tsc clocksource has been installed.
[ 4.025821] ReiserFS: sda4: found reiserfs format "3.6" with standard journal
[ 4.025992] ReiserFS: sda4: using ordered data mode
[ 4.032729] ReiserFS: sda4: journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 4.033439] ReiserFS: sda4: checking transaction log (sda4)
[ 4.074498] ReiserFS: sda4: Using r5 hash to sort names
[ 4.076112] VFS: Mounted root (reiserfs filesystem) readonly.
[ 4.076617] Freeing unused kernel memory: 204k freed
[ 16.636806] usbcore: registered new interface driver usbfs
[ 16.638209] usbcore: registered new interface driver hub
[ 16.639953] usbcore: registered new device driver usb
[ 16.643738] uhci_hcd: Unknown symbol usb_hcd_pci_suspend
[ 16.643864] uhci_hcd: Unknown symbol usb_hcd_resume_root_hub
[ 16.643983] uhci_hcd: Unknown symbol usb_hcd_pci_probe
[ 16.644134] uhci_hcd: Unknown symbol usb_check_bandwidth
[ 16.644296] uhci_hcd: Unknown symbol usb_disabled
[ 16.644404] uhci_hcd: Unknown symbol usb_release_bandwidth
[ 16.644639] uhci_hcd: Unknown symbol usb_claim_bandwidth
[ 16.644823] uhci_hcd: Unknown symbol usb_hcd_pci_resume
[ 16.645016] uhci_hcd: Unknown symbol usb_hcd_giveback_urb
[ 16.645145] uhci_hcd: Unknown symbol usb_hcd_poll_rh_status
[ 16.645299] uhci_hcd: Unknown symbol usb_hcd_pci_remove
[ 16.645404] uhci_hcd: Unknown symbol usb_root_hub_lost_power
[ 16.657587] Linux agpgart interface v0.101 (c) Dave Jones
[ 16.673383] agpgart: Detected an Intel 865 Chipset.
[ 16.681730] agpgart: AGP aperture is 128M @ 0xe0000000
[ 16.690959] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 18
[ 16.691135] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 16.691156] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 16.699715] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 16.700673] ehci_hcd 0000:00:1d.7: debug port 1
[ 16.700761] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 16.700830] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xfa100000
[ 16.704780] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 16.713987] usb usb1: configuration #1 chosen from 1 choice
[ 16.718261] hub 1-0:1.0: USB hub found
[ 16.719035] hub 1-0:1.0: 8 ports detected
[ 16.762335] USB Universal Host Controller Interface driver v3.0
[ 16.849065] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 19
[ 16.849201] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 16.849211] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 16.850193] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 16.850333] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000bc00
[ 16.855537] usb usb2: configuration #1 chosen from 1 choice
[ 16.857930] hub 2-0:1.0: USB hub found
[ 16.858687] hub 2-0:1.0: 2 ports detected
[ 16.970093] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
[ 16.970256] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 16.970267] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 16.972148] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 16.972273] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000b000
[ 16.976608] usb usb3: configuration #1 chosen from 1 choice
[ 16.978816] hub 3-0:1.0: USB hub found
[ 16.978949] hub 3-0:1.0: 2 ports detected
[ 17.086793] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
[ 17.086924] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 17.086934] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 17.088225] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 17.088334] uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000b400
[ 17.092704] usb usb4: configuration #1 chosen from 1 choice
[ 17.094191] hub 4-0:1.0: USB hub found
[ 17.094285] hub 4-0:1.0: 2 ports detected
[ 17.205559] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 19
[ 17.205700] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 17.205716] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 17.208628] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 17.208792] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000b800
[ 17.217339] usb usb5: configuration #1 chosen from 1 choice
[ 17.219910] hub 5-0:1.0: USB hub found
[ 17.220014] hub 5-0:1.0: 2 ports detected
[ 17.225186] ieee1394: Initialized config rom entry `ip1394'
[ 17.270651] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 17.275028] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 17.334143] 8139cp 0000:02:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 17.334216] 8139cp 0000:02:02.0: Try the "8139too" driver instead.
[ 17.395453] gameport: EMU10K1 is pci0000:02:06.1/gameport0, io 0xa800, speed 1569kHz
[ 17.467313] usb 2-2: configuration #1 chosen from 1 choice
[ 17.472882] hub 2-2:1.0: USB hub found
[ 17.475719] hub 2-2:1.0: 3 ports detected
[ 17.603487] 8139too Fast Ethernet driver 0.9.28
[ 17.604830] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 16
[ 17.608544] eth0: RealTek RTL8139 at 0xf8974000, 00:50:8d:d5:d7:61, IRQ 16
[ 17.608607] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 17.671900] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 21
[ 17.759593] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[fa00a000-fa00a7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 17.762562] ACPI: PCI Interrupt 0000:02:06.2[B] -> GSI 23 (level, low) -> IRQ 18
[ 17.822097] ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fa00b000-fa00b7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 17.830871] usb 2-2.1: new full speed USB device using uhci_hcd and address 3
[ 17.991300] usb 2-2.1: configuration #1 chosen from 1 choice
[ 18.189738] input: GenPS/2 Genius Mouse as /class/input/input0
[ 18.934671] usbcore: registered new interface driver hiddev
[ 18.998091] input: Chicony PFU-65 USB Keyboard as /class/input/input1
[ 19.008743] input: USB HID v1.00 Keyboard [Chicony PFU-65 USB Keyboard] on usb-0000:00:1d.0-2.1
[ 19.008981] usbcore: registered new interface driver usbhid
[ 19.009053] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 19.070442] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00508d0000d4d761]
[ 19.157776] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[ 19.361249] ieee1394: Host added: ID:BUS[1-00:1023] GUID[00023c01510ed301]
[ 19.876802] parport0: PC-style at 0x378 [PCSPP]
[ 19.988403] lp0: using parport0 (polling).
[ 20.068066] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[ 20.068136] ieee1394: sbp2: Try serialize_io=0 for better performance
[ 20.290819] Adding 1951888k swap on /dev/disk/by-uuid/97f55782-d547-4ac3-8ce6-8c5865c10620. Priority:-1 extents:1 across:1951888k
[ 20.345288] NET: Registered protocol family 17
[ 26.318773] NET: Registered protocol family 10
[ 26.320105] lo: Disabled Privacy Extensions
[ 35.247823] NTFS driver 2.1.27 [Flags: R/O MODULE].
[ 35.318176] NTFS volume version 3.0.
[ 36.414655] eth0: no IPv6 routers present
[ 39.337709] Using specific hotkey driver
[ 39.618593] ACPI: Thermal Zone [THRM] (20 C)
[ 39.743464] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[ 39.798975] ACPI: Power Button (FF) [PWRF]
[ 39.799008] ACPI: Power Button (CM) [PWRB]
[ 39.980050] ibm_acpi: ec object not found
[ 44.562998] apm: BIOS not found.
[ 63.491851] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 22
[ 63.517064] ssb: Core 0 found: cc 0800, rev 0D, vendor 4243
[ 63.517086] ssb: Core 1 found: cc 0812, rev 09, vendor 4243
[ 63.517175] ssb: Core 2 found: cc 0804, rev 0C, vendor 4243
[ 63.517204] ssb: Core 3 found: cc 080D, rev 07, vendor 4243
[ 63.517277] bcm43xx_d80211: Broadcom 4318 WLAN found
[ 63.517290] ssb: Switching to core 2
[ 63.520898] ssb: Switching to core 1
[ 63.520935] bcm43xx_d80211: PHY connected
[ 63.520956] bcm43xx_d80211: Detected PHY: Version: 3, Type 2, Revision 7
[ 63.521037] bcm43xx_d80211: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8)
[ 63.521063] bcm43xx_d80211: Radio turned off
[ 63.521079] bcm43xx_d80211: Radio turned off
[ 63.634357] wmaster0: Selected rate control algorithm 'simple'
[ 65.893123] bcm43xx_d80211: Virtual interface added (type: 0x00000002, ID: 5, MAC: 00:14:bf:72:8f:b7)
[ 65.913004] ssb: Switching to core 0
[ 65.913169] ssb: Switching to core 1
[ 65.914707] bcm43xx_d80211: PHY connected
[ 66.287295] bcm43xx_d80211: firmware revision 15F, patchlevel 7E, date 2006-07-29 05:54:02
[ 66.287612] ssb: Switching to core 0
[ 66.288097] ssb: Switching to core 1
[ 66.299189] bcm43xx_d80211: Radio turned on
[ 66.315150] bcm43xx_d80211: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/d80211/bcm43xx/bcm43xx_phy.c:1482:bcm43xx_find_lopair()
[ 66.472443] bcm43xx_d80211: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/d80211/bcm43xx/bcm43xx_phy.c:1482:bcm43xx_find_lopair()
[ 66.476345] bcm43xx_d80211: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/d80211/bcm43xx/bcm43xx_phy.c:1482:bcm43xx_find_lopair()
[ 66.476455] ssb: Switching to core 0
[ 66.477179] ssb: Switching to core 1
[ 66.478678] bcm43xx_d80211: Chip initialized
[ 66.486788] bcm43xx_d80211: 32-bit DMA initialized
[ 66.503289] bcm43xx_d80211: Selected 802.11 core (phytype 2)
[ 66.508675] wmaster0: Does not support passive scan, disabled
[ 66.511930] bcm43xx_d80211: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/d80211/bcm43xx/bcm43xx_phy.c:1482:bcm43xx_find_lopair()
[ 66.533094] sta0: dropped data frame to not associated station 00:00:00:00:00:00
[ 66.644469] sta0: starting scan
[ 66.644615] HW CONFIG: channel=1 freq=2412 phymode=3
[ 66.715761] HW CONFIG: channel=2 freq=2417 phymode=3
[ 66.787647] HW CONFIG: channel=3 freq=2422 phymode=3
[ 66.859532] HW CONFIG: channel=4 freq=2427 phymode=3
[ 66.931397] HW CONFIG: channel=5 freq=2432 phymode=3
[ 67.003283] HW CONFIG: channel=6 freq=2437 phymode=3
[ 67.075157] HW CONFIG: channel=7 freq=2442 phymode=3
[ 67.147041] HW CONFIG: channel=8 freq=2447 phymode=3
[ 67.218919] HW CONFIG: channel=9 freq=2452 phymode=3
[ 67.290792] HW CONFIG: channel=10 freq=2457 phymode=3
[ 67.362685] HW CONFIG: channel=11 freq=2462 phymode=3
[ 67.434652] HW CONFIG: channel=1 freq=2412 phymode=3
[ 67.442623] sta0: scan completed
[ 67.445772] HW CONFIG: channel=6 freq=2437 phymode=3
[ 67.453846] sta0: Initial auth_alg=0
[ 67.453853] sta0: authenticate with AP 00:90:4c:60:04:00
[ 67.455760] sta0: RX authentication from 00:90:4c:60:04:00 (alg=0 transaction=2 status=0)
[ 67.455769] sta0: authenticated
[ 67.455774] sta0: associate with AP 00:90:4c:60:04:00
[ 67.455782] sta0: mismatch in privacy configuration and mixed-cell disabled - abort association
[ 67.538859] sta0: dropped data frame to not associated station 00:90:4c:60:04:00
[ 67.654182] sta0: associate with AP 00:90:4c:60:04:00
[ 67.654190] sta0: mismatch in privacy configuration and mixed-cell disabled - abort association
[ 67.654199] sta0: privacy configuration mismatch and mixed-cell disabled - disassociate
[ 68.537768] sta0: dropped data frame to not associated station 00:90:4c:60:04:00
[ 72.450437] sta0: starting scan
[ 72.450583] HW CONFIG: channel=1 freq=2412 phymode=3
[ 72.521978] HW CONFIG: channel=2 freq=2417 phymode=3
[ 72.593857] HW CONFIG: channel=3 freq=2422 phymode=3
[ 72.665736] HW CONFIG: channel=4 freq=2427 phymode=3
[ 72.737615] HW CONFIG: channel=5 freq=2432 phymode=3
[ 72.809493] HW CONFIG: channel=6 freq=2437 phymode=3
[ 72.881373] HW CONFIG: channel=7 freq=2442 phymode=3
[ 72.953251] HW CONFIG: channel=8 freq=2447 phymode=3
[ 73.025130] HW CONFIG: channel=9 freq=2452 phymode=3
[ 73.097010] HW CONFIG: channel=10 freq=2457 phymode=3
[ 73.168889] HW CONFIG: channel=11 freq=2462 phymode=3
[ 73.240869] HW CONFIG: channel=6 freq=2437 phymode=3
[ 73.248818] sta0: scan completed
[ 73.251600] HW CONFIG: channel=6 freq=2437 phymode=3
[ 73.251781] sta0: Initial auth_alg=0
[ 73.251788] sta0: authenticate with AP 00:90:4c:60:04:00
[ 73.252061] sta0: Initial auth_alg=0
[ 73.252067] sta0: authenticate with AP 00:90:4c:60:04:00
[ 73.252785] sta0: RX authentication from 00:90:4c:60:04:00 (alg=0 transaction=2 status=0)
[ 73.252792] sta0: authenticated
[ 73.252797] sta0: associate with AP 00:90:4c:60:04:00
[ 73.252804] sta0: mismatch in privacy configuration and mixed-cell disabled - abort association
[ 73.253931] sta0: authentication frame received from 00:90:4c:60:04:00, but not in authenticate state - ignored
[ 73.452414] sta0: associate with AP 00:90:4c:60:04:00
[ 73.452423] sta0: mismatch in privacy configuration and mixed-cell disabled - abort association
[ 73.452432] sta0: privacy configuration mismatch and mixed-cell disabled - disassociate
[ 76.008423] sta0: dropped data frame to not associated station 00:90:4c:60:04:00
[ 76.527682] sta0: dropped data frame to not associated station 00:90:4c:60:04:00
[ 77.525440] sta0: no IPv6 routers present
[ 78.244684] sta0: starting scan
[ 78.244821] HW CONFIG: channel=1 freq=2412 phymode=3
[ 78.316223] HW CONFIG: channel=2 freq=2417 phymode=3
[ 78.388102] HW CONFIG: channel=3 freq=2422 phymode=3
[ 78.459982] HW CONFIG: channel=4 freq=2427 phymode=3
[ 78.531860] HW CONFIG: channel=5 freq=2432 phymode=3
[ 78.603739] HW CONFIG: channel=6 freq=2437 phymode=3
[ 78.675619] HW CONFIG: channel=7 freq=2442 phymode=3
[ 78.747497] HW CONFIG: channel=8 freq=2447 phymode=3
[ 78.819376] HW CONFIG: channel=9 freq=2452 phymode=3
[ 78.891255] HW CONFIG: channel=10 freq=2457 phymode=3
[ 78.963134] HW CONFIG: channel=11 freq=2462 phymode=3
[ 79.035114] HW CONFIG: channel=6 freq=2437 phymode=3
[ 79.043070] sta0: scan completed
[ 79.045910] HW CONFIG: channel=6 freq=2437 phymode=3
[ 79.046091] sta0: Initial auth_alg=0
[ 79.046097] sta0: authenticate with AP 00:90:4c:60:04:00
[ 79.046392] sta0: Initial auth_alg=0
[ 79.046397] sta0: authenticate with AP 00:90:4c:60:04:00
[ 79.047307] sta0: RX authentication from 00:90:4c:60:04:00 (alg=0 transaction=2 status=0)
[ 79.047313] sta0: authenticated
[ 79.047319] sta0: associate with AP 00:90:4c:60:04:00
[ 79.047326] sta0: mismatch in privacy configuration and mixed-cell disabled - abort association
[ 79.048198] sta0: authentication frame received from 00:90:4c:60:04:00, but not in authenticate state - ignored
[ 79.246660] sta0: associate with AP 00:90:4c:60:04:00
[ 79.246670] sta0: mismatch in privacy configuration and mixed-cell disabled - abort association
[ 79.246679] sta0: privacy configuration mismatch and mixed-cell disabled - disassociate
[ 80.474104] bcm43xx_d80211: Radio turned off
[ 80.474120] ssb: Switching to core 0
[ 80.474686] bcm43xx_d80211: DMA-32 0x0200 (RX) max used slots: 1/64
[ 80.474693] ssb: Switching to core 1
[ 80.501334] bcm43xx_d80211: DMA-32 0x02A0 (TX) max used slots: 0/128
[ 80.503069] bcm43xx_d80211: DMA-32 0x0280 (TX) max used slots: 0/128
[ 80.506349] bcm43xx_d80211: DMA-32 0x0260 (TX) max used slots: 0/128
[ 80.508083] bcm43xx_d80211: DMA-32 0x0240 (TX) max used slots: 0/128
[ 80.511183] bcm43xx_d80211: DMA-32 0x0220 (TX) max used slots: 2/128
[ 80.512913] bcm43xx_d80211: DMA-32 0x0200 (TX) max used slots: 0/128
[ 80.516856] bcm43xx_d80211: Virtual interface removed (type: 0x00000002, ID: 5, MAC: 00:14:bf:72:8f:b7)
[ 102.777120] SysRq : HELP : loglevel0-8 reBoot show-all-locks(D) tErm Full kIll saK showMem Nice powerOff showPc unRaw Sync showTasks Unmount
[ 122.499744] SysRq : Show State
[ 122.499829]
[ 122.499830] sibling
[ 122.499911] task PC pid father child younger older
[ 122.500057] init S C1986B34 0 1 0 2 (NOTLB)
[ 122.500322] c1986b48 00000082 00000002 c1986b34 c1986b30 c1985aec c013565a b97955c9
[ 122.500658] 00000012 c1985aec c19855b0 00000000 c037850f 00000005 c19855b0 c03f54e0
[ 122.501037] b994ef18 00000012 001aafd4 00000000 c19856bc c1828dc0 c0522140 c03782fd
[ 122.501424] Call Trace:
[ 122.501520] [<c0377bdb>] schedule_timeout+0x6e/0xac
[ 122.501617] [<c016ee05>] do_select+0x3bb/0x49c
[ 122.501711] [<c016f0c0>] core_sys_select+0x1da/0x322
[ 122.501803] [<c016f835>] sys_select+0x3f/0x1b6
[ 122.501893] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.501987] [<b7ef8410>] 0xb7ef8410
[ 122.502078] =======================
[ 122.502129] migration/0 S C013565A 0 2 1 3 (L-TLB)
[ 122.502410] c1990f88 00000086 c198faec c013565a c0119078 00000001 c0634718 b9345de2
[ 122.502754] 00000012 b962fc46 00000000 c1828dd4 c198f5b0 00000001 c198f5b0 f3b8a5b0
[ 122.503140] b963e216 00000012 0009133b 00000000 c198f6bc c1828dc0 00000001 c1990fc4
[ 122.503527] Call Trace:
[ 122.503622] [<c0119160>] migration_thread+0x143/0x278
[ 122.503715] [<c012e5bd>] kthread+0xde/0xe2
[ 122.503807] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.503899] =======================
[ 122.503950] ksoftirqd/0 S C1994FA8 0 3 1 4 2 (L-TLB)
[ 122.504230] c1994fbc 00000096 00000002 c1994fa8 c1994fa4 00000078 c182974c 1b7a896e
[ 122.504573] 00000015 00000078 c182974c 00000001 b3eaf8cf 0000000a c19935b0 c03f54e0
[ 122.504960] 1b966377 00000015 00001267 00000000 c19936bc c1828dc0 c0522140 c1994fa4
[ 122.505347] Call Trace:
[ 122.505441] [<c0121887>] ksoftirqd+0xfe/0x119
[ 122.505532] [<c012e5bd>] kthread+0xde/0xe2
[ 122.505622] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.505714] =======================
[ 122.505765] watchdog/0 S C1998FA8 0 4 1 5 3 (L-TLB)
[ 122.506045] c1998fbc 00000096 00000002 c1998fa8 c1998fa4 c1997ae0 00000000 61043ba3
[ 122.506389] 0000001c 00000078 c182974c 00000003 00000002 00000001 c19975b0 c03f54e0
[ 122.506776] 61045624 0000001c 0000096c 00000000 c19976bc c1828dc0 c0522140 c1830dc0
[ 122.507163] Call Trace:
[ 122.507258] [<c0141417>] watchdog+0x4b/0x64
[ 122.507349] [<c012e5bd>] kthread+0xde/0xe2
[ 122.507439] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.507530] =======================
[ 122.507580] migration/1 S C19BBF74 0 5 1 6 4 (L-TLB)
[ 122.507861] c19bbf88 00000086 00000002 c19bbf74 c19bbf70 00000001 c0634718 b8f6ab12
[ 122.508204] 00000012 00000000 00000000 c1830dd4 c19ba5b0 00000001 c19ba5b0 c19895b0
[ 122.508591] b907b92f 00000012 00024c5e 00000001 c19ba6bc c1830dc0 c0522140 c19bbfc4
[ 122.508979] Call Trace:
[ 122.509073] [<c0119160>] migration_thread+0x143/0x278
[ 122.509165] [<c012e5bd>] kthread+0xde/0xe2
[ 122.509255] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.509346] =======================
[ 122.509397] ksoftirqd/1 S C19EFFA8 0 6 1 7 5 (L-TLB)
[ 122.509676] c19effbc 00000096 00000002 c19effa8 c19effa4 00000078 c183174c 67945a4f
[ 122.510021] 00000012 0000000a f3b775b0 f3b775b0 675bdf01 00000009 c19ee5b0 c19895b0
[ 122.510408] 679fbf5a 00000012 00000cc9 00000001 c19ee6bc c1830dc0 c0522140 00000246
[ 122.510795] Call Trace:
[ 122.510890] [<c0121887>] ksoftirqd+0xfe/0x119
[ 122.510980] [<c012e5bd>] kthread+0xde/0xe2
[ 122.511070] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.511161] =======================
[ 122.511212] watchdog/1 S 00000002 0 7 1 8 6 (L-TLB)
[ 122.511491] c19f3fbc 00000096 00000000 00000002 c0376e09 c19f2ae0 00000000 856efc03
[ 122.511835] 0000001c 00000078 c183174c 00000000 00000002 00000009 c19f25b0 f5ebc5b0
[ 122.512221] 856f1192 0000001c 000009d0 00000001 c19f26bc c1830dc0 c0522140 c1828dc0
[ 122.512609] Call Trace:
[ 122.512703] [<c0141417>] watchdog+0x4b/0x64
[ 122.512793] [<c012e5bd>] kthread+0xde/0xe2
[ 122.512883] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.512974] =======================
[ 122.513024] events/0 S 00000001 0 8 1 9 7 (L-TLB)
[ 122.513304] c1a10f80 00000082 c1a0faec 00000001 c1a0f5b0 00000000 c1a0df3c 83c45f4b
[ 122.513647] 0000001c 00000078 c182974c 00000003 00000000 0000000a c1a0f5b0 f74d05b0
[ 122.514034] 83c8467b 0000001c 000060a0 00000000 c1a0f6bc c1828dc0 c1a10f9c c1830dc0
[ 122.514421] Call Trace:
[ 122.514516] [<c012be09>] worker_thread+0x106/0x13d
[ 122.514608] [<c012e5bd>] kthread+0xde/0xe2
[ 122.514697] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.514788] =======================
[ 122.514839] events/1 S 00000001 0 9 1 10 8 (L-TLB)
[ 122.515118] c199df80 00000082 c199caec 00000001 c199c5b0 00000000 c1a0ef3c 4ae18c65
[ 122.515462] 0000001c c0634718 c183174c 00000000 00000000 0000000a c199c5b0 f5ebc5b0
[ 122.515849] 4ae5aaf6 0000001c 0000673a 00000001 c199c6bc c1830dc0 c199df9c c1828dc0
[ 122.516236] Call Trace:
[ 122.516330] [<c012be09>] worker_thread+0x106/0x13d
[ 122.516421] [<c012e5bd>] kthread+0xde/0xe2
[ 122.516511] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.516601] =======================
[ 122.516652] khelper S 00000001 0 10 1 11 9 (L-TLB)
[ 122.516932] c1a16f80 00000082 c1a15aec 00000001 c1a155b0 00000000 c1a13f3c d4dbc11e
[ 122.517276] 0000000e c0634718 00000046 00000000 00000000 0000000a c1a155b0 f3b5f5b0
[ 122.517663] d4ece186 0000000e 0005e6d1 00000001 c1a156bc c1830dc0 c1a16f9c c0134ddc
[ 122.518050] Call Trace:
[ 122.518145] [<c012be09>] worker_thread+0x106/0x13d
[ 122.518236] [<c012e5bd>] kthread+0xde/0xe2
[ 122.518326] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.518417] =======================
[ 122.518468] kthread S C19B7F6C 0 11 1 49 848 10 (L-TLB)
[ 122.518750] c19b7f80 00000082 00000002 c19b7f6c c19b7f68 00000000 c19b4f3c b9345de2
[ 122.519094] 00000012 c0634718 00000046 00000000 00000000 00000001 c19b65b0 c03f54e0
[ 122.519481] b94f2606 00000012 00033bce 00000000 c19b66bc c1828dc0 c0522140 c0134ddc
[ 122.519868] Call Trace:
[ 122.519963] [<c012be09>] worker_thread+0x106/0x13d
[ 122.520056] [<c012e5bd>] kthread+0xde/0xe2
[ 122.520146] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.520237] =======================
[ 122.520288] kblockd/0 S 00000001 0 49 11 50 (L-TLB)
[ 122.520568] c1a5cf80 00000082 c1a5baec 00000001 c1a5b5b0 00000000 c1b3af3c fe004385
[ 122.520912] 0000001b c0634718 00000046 00000000 00000000 0000000a c1a5b5b0 c1a865b0
[ 122.521299] fe14da0f 0000001b 000067a0 00000000 c1a5b6bc c1828dc0 c1a5cf9c c0134ddc
[ 122.521687] Call Trace:
[ 122.521783] [<c012be09>] worker_thread+0x106/0x13d
[ 122.521874] [<c012e5bd>] kthread+0xde/0xe2
[ 122.521964] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.522055] =======================
[ 122.522106] kblockd/1 S 00000001 0 50 11 51 49 (L-TLB)
[ 122.522386] c1a59f80 00000082 c1a58aec 00000001 c1a585b0 00000000 c1b3bf3c 85eb84c4
[ 122.522729] 00000011 c0634718 00000046 00000000 00000000 0000000a c1a585b0 c1a865b0
[ 122.523116] 8601ed80 00000011 0000c808 00000001 c1a586bc c1830dc0 c1a59f9c c0134ddc
[ 122.523503] Call Trace:
[ 122.523597] [<c012be09>] worker_thread+0x106/0x13d
[ 122.523688] [<c012e5bd>] kthread+0xde/0xe2
[ 122.523778] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.523869] =======================
[ 122.523919] kacpid S C1B3DF6C 0 51 11 130 50 (L-TLB)
[ 122.524199] c1b3df80 00000082 00000002 c1b3df6c c1b3df68 00000000 c1b43f3c 0b71d04d
[ 122.524543] 00000000 c0634718 00000046 00000000 00000000 00000007 c1b3c5b0 c19895b0
[ 122.524929] 0b7d603f 00000000 00001614 00000001 c1b3c6bc c1830dc0 c0522140 c0134ddc
[ 122.525316] Call Trace:
[ 122.525410] [<c012be09>] worker_thread+0x106/0x13d
[ 122.525502] [<c012e5bd>] kthread+0xde/0xe2
[ 122.525591] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.526390] =======================
[ 122.526441] ata/0 S 00000000 0 130 11 131 51 (L-TLB)
[ 122.526721] c1a62f80 00000082 c1a615b0 00000000 f7c00fec 00000000 f7cf4f3c 162216c4
[ 122.527064] 00000000 c0634718 00000046 00000002 00000000 00000008 c1a615b0 c19b65b0
[ 122.527451] 162ae6ab 00000000 00002f1e 00000000 c1a616bc c1828dc0 c1a62f9c c0134ddc
[ 122.527838] Call Trace:
[ 122.527933] [<c012be09>] worker_thread+0x106/0x13d
[ 122.528024] [<c012e5bd>] kthread+0xde/0xe2
[ 122.528113] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.528204] =======================
[ 122.528255] ata/1 S F7C1CF6C 0 131 11 132 130 (L-TLB)
[ 122.528535] f7c1cf80 00000082 00000002 f7c1cf6c f7c1cf68 00000000 f7cf5f3c 162201da
[ 122.528879] 00000000 c0634718 00000046 00000000 00000000 00000008 f7c1f5b0 c19895b0
[ 122.529265] 162c190f 00000000 0000181e 00000001 f7c1f6bc c1830dc0 c0522140 c0134ddc
[ 122.529652] Call Trace:
[ 122.529748] [<c012be09>] worker_thread+0x106/0x13d
[ 122.529839] [<c012e5bd>] kthread+0xde/0xe2
[ 122.529928] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.530019] =======================
[ 122.530070] ata_aux S 00000000 0 132 11 133 131 (L-TLB)
[ 122.530350] c1a84f80 00000082 c1a645b0 00000000 c1bcffec 00000000 f7cf6f3c 162201da
[ 122.530694] 00000000 c0634718 00000046 00000000 00000000 00000008 c1a645b0 c19855b0
[ 122.531080] 162dbb12 00000000 00001459 00000001 c1a646bc c1830dc0 c1a84f9c c0134ddc
[ 122.531467] Call Trace:
[ 122.531562] [<c012be09>] worker_thread+0x106/0x13d
[ 122.531653] [<c012e5bd>] kthread+0xde/0xe2
[ 122.531743] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.531833] =======================
[ 122.531884] kseriod S 00000006 0 133 11 161 132 (L-TLB)
[ 122.532164] f7c0cf8c 00000096 c013565a 00000006 00000000 c04122d4 f7c195b0 3c6b87c9
[ 122.532507] 00000004 00000078 c182974c 00000000 c04122d4 0000000a f7c195b0 c1a9f5b0
[ 122.532894] 3c9a15c2 00000004 000214fc 00000000 f7c196bc c1828dc0 00000292 c1830dc0
[ 122.533281] Call Trace:
[ 122.533375] [<c02a1347>] serio_thread+0xb1/0x2fa
[ 122.533470] [<c012e5bd>] kthread+0xde/0xe2
[ 122.533561] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.533652] =======================
[ 122.533704] rt-test-0 S C1AA0FC4 0 161 11 163 133 (L-TLB)
[ 122.533984] c1aa0fb8 00000082 c011fef3 c1aa0fc4 c0376e6d 00000000 00000002 1ca9f927
[ 122.534328] 00000000 f7d18fec c1a955b0 00000000 c1a955b0 00000009 c1a955b0 c19855b0
[ 122.534715] 1cab8449 00000000 0000104a 00000000 c1a956bc c1828dc0 c0134ddc c1986ee8
[ 122.535102] Call Trace:
[ 122.535196] [<c013a931>] test_func+0x7f/0xa6
[ 122.535288] [<c012e5bd>] kthread+0xde/0xe2
[ 122.535378] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.535469] =======================
[ 122.535520] rt-test-1 S C1AB3FC4 0 163 11 165 161 (L-TLB)
[ 122.535801] c1ab3fb8 00000082 c011fef3 c1ab3fc4 c0376e6d 00000000 00000002 1c8f2cf7
[ 122.536144] 00000000 c1bc7fec c1abd5b0 00000000 c1abd5b0 00000007 c1abd5b0 c19855b0
[ 122.536531] 1cb35da3 00000000 00000e06 00000001 c1abd6bc c1830dc0 c0134ddc c1986ee8
[ 122.536918] Call Trace:
[ 122.537012] [<c013a931>] test_func+0x7f/0xa6
[ 122.537103] [<c012e5bd>] kthread+0xde/0xe2
[ 122.537193] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.537284] =======================
[ 122.537334] rt-test-2 S C1A9AFC4 0 165 11 167 163 (L-TLB)
[ 122.537615] c1a9afb8 00000082 c011fef3 c1a9afc4 c0376e6d 00000000 00000002 1ca9f927
[ 122.537959] 00000000 f7d89fec c1a9c5b0 00000000 c1a9c5b0 00000007 c1a9c5b0 c19855b0
[ 122.538346] 1cbb64c0 00000000 00000bde 00000000 c1a9c6bc c1828dc0 c0134ddc c1986ee8
[ 122.538733] Call Trace:
[ 122.538828] [<c013a931>] test_func+0x7f/0xa6
[ 122.538918] [<c012e5bd>] kthread+0xde/0xe2
[ 122.539008] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.539099] =======================
[ 122.539150] rt-test-3 S C1AC5FC4 0 167 11 169 165 (L-TLB)
[ 122.539430] c1ac5fb8 00000082 c011fef3 c1ac5fc4 c0376e6d 00000000 00000002 1c8f2cf7
[ 122.539774] 00000000 c1bc0fec c1ac45b0 00000000 c1ac45b0 00000006 c1ac45b0 c19855b0
[ 122.540161] 1cc3223a 00000000 00000cf5 00000001 c1ac46bc c1830dc0 c0134ddc c1986ee8
[ 122.540548] Call Trace:
[ 122.540643] [<c013a931>] test_func+0x7f/0xa6
[ 122.540733] [<c012e5bd>] kthread+0xde/0xe2
[ 122.540823] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.540914] =======================
[ 122.540964] rt-test-4 S C1AD2FC4 0 169 11 171 167 (L-TLB)
[ 122.541244] c1ad2fb8 00000082 c011fef3 c1ad2fc4 c0376e6d 00000000 00000002 1ca9f927
[ 122.541588] 00000000 f7d8cfec c1aa95b0 00000000 c1aa95b0 00000006 c1aa95b0 c19855b0
[ 122.541975] 1ccb21d0 00000000 00000d2d 00000000 c1aa96bc c1828dc0 c0134ddc c1986ee8
[ 122.542362] Call Trace:
[ 122.542457] [<c013a931>] test_func+0x7f/0xa6
[ 122.542547] [<c012e5bd>] kthread+0xde/0xe2
[ 122.542638] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.542729] =======================
[ 122.542779] rt-test-5 S C1A90FA4 0 171 11 173 169 (L-TLB)
[ 122.543059] c1a90fb8 00000082 00000002 c1a90fa4 c1a90fa0 00000000 00000002 1ccc1c13
[ 122.543403] 00000000 c1bbafec c1a8f5b0 00000001 c1a8f5b0 00000005 c1a8f5b0 c19895b0
[ 122.543790] 1cd9f401 00000000 00000df5 00000001 c1a8f6bc c1830dc0 c0522140 c1986ee8
[ 122.544177] Call Trace:
[ 122.544272] [<c013a931>] test_func+0x7f/0xa6
[ 122.544362] [<c012e5bd>] kthread+0xde/0xe2
[ 122.544452] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.544543] =======================
[ 122.544594] rt-test-6 S C1AA8FA4 0 173 11 175 171 (L-TLB)
[ 122.544874] c1aa8fb8 00000082 00000002 c1aa8fa4 c1aa8fa0 00000000 00000002 1cda9891
[ 122.545218] 00000000 f7daffec c1ace5b0 00000001 c1ace5b0 00000005 c1ace5b0 c03f54e0
[ 122.545605] 1ce1e90e 00000000 00000e7a 00000000 c1ace6bc c1828dc0 c0522140 c1986ee8
[ 122.545992] Call Trace:
[ 122.546087] [<c013a931>] test_func+0x7f/0xa6
[ 122.546177] [<c012e5bd>] kthread+0xde/0xe2
[ 122.546267] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.546358] =======================
[ 122.546409] rt-test-7 S C1A8AFA4 0 175 11 177 173 (L-TLB)
[ 122.546689] c1a8afb8 00000082 00000002 c1a8afa4 c1a8afa0 00000000 00000002 1ce678f0
[ 122.547033] 00000000 c1b77fec c1a895b0 00000001 c1a895b0 00000004 c1a895b0 c19895b0
[ 122.547419] 1ce9ac6d 00000000 00000df7 00000001 c1a896bc c1830dc0 c0522140 c1986ee8
[ 122.547807] Call Trace:
[ 122.547901] [<c013a931>] test_func+0x7f/0xa6
[ 122.547991] [<c012e5bd>] kthread+0xde/0xe2
[ 122.548081] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.548172] =======================
[ 122.548223] pdflush S C1A5FF8C 0 177 11 178 175 (L-TLB)
[ 122.548503] c1a5ffa0 00000086 00000002 c1a5ff8c c1a5ff88 c1828dc0 00000296 1cda9891
[ 122.548847] 00000000 c0379c31 00000000 c03fc7f4 c1a555b0 00000003 c1a555b0 c03f54e0
[ 122.549234] 1cf11be2 00000000 00006983 00000000 c1a556bc c1828dc0 c0522140 c014ac53
[ 122.549621] Call Trace:
[ 122.549716] [<c014acf8>] pdflush+0xa5/0x1bd
[ 122.549807] [<c012e5bd>] kthread+0xde/0xe2
[ 122.549897] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.549988] =======================
[ 122.550039] pdflush S C1A87F8C 0 178 11 179 177 (L-TLB)
[ 122.550318] c1a87fa0 00000086 00000002 c1a87f8c c1a87f88 00000296 c0557a00 fe004385
[ 122.550662] 0000001b c0557a00 00000000 c03fc7f4 c1a865b0 0000000a c1a865b0 c03f54e0
[ 122.551049] fe27c537 0000001b 00045774 00000000 c1a866bc c1828dc0 c0522140 c014ac53
[ 122.551436] Call Trace:
[ 122.551531] [<c014acf8>] pdflush+0xa5/0x1bd
[ 122.552329] [<c012e5bd>] kthread+0xde/0xe2
[ 122.552419] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.552510] =======================
[ 122.552561] kswapd0 S C1A56F28 0 179 11 180 178 (L-TLB)
[ 122.552841] c1a56f3c 00000092 00000002 c1a56f28 c1a56f24 c03fc760 c1a515b0 1cda9891
[ 122.553184] 00000000 00000046 00000000 00000000 c03fc760 00000002 c1a515b0 c03f54e0
[ 122.553571] 1d003de2 00000000 000018ce 00000000 c1a516bc c1828dc0 c0522140 c0134ddc
[ 122.553958] Call Trace:
[ 122.554053] [<c014db26>] kswapd+0x3fd/0x421
[ 122.554144] [<c012e5bd>] kthread+0xde/0xe2
[ 122.554234] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.554325] =======================
[ 122.554376] aio/0 S 00000000 0 180 11 181 179 (L-TLB)
[ 122.554656] c1aadf80 00000082 c1ab15b0 00000000 f7da8fec 00000000 f7404f3c 1cda9891
[ 122.554999] 00000000 c0634718 00000046 00000002 00000000 00000001 c1ab15b0 c19b65b0
[ 122.555386] 1d0198a4 00000000 00002cbc 00000000 c1ab16bc c1828dc0 c1aadf9c c0134ddc
[ 122.555772] Call Trace:
[ 122.555867] [<c012be09>] worker_thread+0x106/0x13d
[ 122.555958] [<c012e5bd>] kthread+0xde/0xe2
[ 122.556048] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.556138] =======================
[ 122.556189] aio/1 S C1A52F6C 0 181 11 791 180 (L-TLB)
[ 122.556469] c1a52f80 00000082 00000002 c1a52f6c c1a52f68 00000000 f7405f3c 1ce678f0
[ 122.556813] 00000000 c0634718 00000046 00000000 00000000 00000001 c1a4e5b0 c19895b0
[ 122.557199] 1d02fb52 00000000 00001789 00000001 c1a4e6bc c1830dc0 c0522140 c0134ddc
[ 122.557586] Call Trace:
[ 122.557681] [<c012be09>] worker_thread+0x106/0x13d
[ 122.557773] [<c012e5bd>] kthread+0xde/0xe2
[ 122.557863] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.557954] =======================
[ 122.558004] scsi_eh_0 S F772CF50 0 791 11 792 181 (L-TLB)
[ 122.558285] f772cf64 00000086 00000002 f772cf50 f772cf4c 00000046 00000000 a15f7aee
[ 122.558628] 00000000 00000000 f74df5b0 c0379c47 c19fc000 0000000a f74df5b0 c03f54e0
[ 122.559015] a1676a28 00000000 00015c2f 00000000 f74df6bc c1828dc0 c0522140 00000000
[ 122.559401] Call Trace:
[ 122.559496] [<c0281301>] scsi_error_handler+0x43/0xb4c
[ 122.559589] [<c012e5bd>] kthread+0xde/0xe2
[ 122.559679] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.559770] =======================
[ 122.559820] scsi_eh_1 S F74D4F50 0 792 11 850 791 (L-TLB)
[ 122.560100] f74d4f64 00000086 00000002 f74d4f50 f74d4f4c 00000046 00000000 ab894c9f
[ 122.560444] 00000000 00000000 f761f5b0 c0379c47 f72d4000 00000009 f761f5b0 c03f54e0
[ 122.560831] ab89af02 00000000 00003a88 00000000 f761f6bc c1828dc0 c0522140 00000000
[ 122.561218] Call Trace:
[ 122.561313] [<c0281301>] scsi_error_handler+0x43/0xb4c
[ 122.561404] [<c012e5bd>] kthread+0xde/0xe2
[ 122.561494] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.561585] =======================
[ 122.561636] kirqd S F7540F44 0 848 1 859 11 (L-TLB)
[ 122.561916] f7540f58 00000086 00000002 f7540f44 f7540f40 00000000 f74e45b0 b87ff3f2
[ 122.562259] 0000001b f74e45b0 f74e4ae0 00000000 f74e45b0 0000000a f74e45b0 c03f54e0
[ 122.562646] b8805061 0000001b 00004180 00000000 f74e46bc c1828dc0 c0522140 c0379c31
[ 122.563033] Call Trace:
[ 122.563127] [<c0377bb6>] schedule_timeout+0x49/0xac
[ 122.563219] [<c01109e6>] balanced_irq+0x67/0x567
[ 122.563312] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.563403] =======================
[ 122.563454] reiserfs/0 S F74DAF6C 0 850 11 851 792 (L-TLB)
[ 122.563734] f74daf80 00000082 00000002 f74daf6c f74daf68 00000000 f6f6ef3c 03f39406
[ 122.564078] 0000001c c0634718 00000046 00000000 00000000 0000000a f74d65b0 c03f54e0
[ 122.564465] 03f605c2 0000001c 00005baa 00000000 f74d66bc c1828dc0 c0522140 c0134ddc
[ 122.564852] Call Trace:
[ 122.564946] [<c012be09>] worker_thread+0x106/0x13d
[ 122.565037] [<c012e5bd>] kthread+0xde/0xe2
[ 122.565127] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.565218] =======================
[ 122.565268] reiserfs/1 S F74AEF6C 0 851 11 1818 850 (L-TLB)
[ 122.565548] f74aef80 00000082 00000002 f74aef6c f74aef68 00000000 f6f6ff3c 8bded52a
[ 122.565893] 00000011 c0634718 00000046 00000000 00000000 0000000a f772b5b0 c19895b0
[ 122.566279] 8be0f5a4 00000011 000055e5 00000001 f772b6bc c1830dc0 c0522140 c0134ddc
[ 122.566666] Call Trace:
[ 122.566761] [<c012be09>] worker_thread+0x106/0x13d
[ 122.566852] [<c012e5bd>] kthread+0xde/0xe2
[ 122.566942] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.567033] =======================
[ 122.567084] logd S F75595B0 0 859 1 1047 848 (NOTLB)
[ 122.567364] c1a47b48 00000082 f75595b0 f75595b0 f7559aec c013565a c012e8b4 a13b57b0
[ 122.567708] 0000000c f7559b14 c182974c 00000002 00000000 0000000a f75595b0 c19855b0
[ 122.568095] a15b976e 0000000c 00146153 00000000 f75596bc c1828dc0 00000000 c1830dc0
[ 122.568482] Call Trace:
[ 122.568576] [<c0377bdb>] schedule_timeout+0x6e/0xac
[ 122.568668] [<c016ee05>] do_select+0x3bb/0x49c
[ 122.568758] [<c016f0c0>] core_sys_select+0x1da/0x322
[ 122.568849] [<c016f835>] sys_select+0x3f/0x1b6
[ 122.568939] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.569031] [<b7f31410>] 0xb7f31410
[ 122.569120] =======================
[ 122.569170] udevd S C0189922 0 1047 1 2300 859 (NOTLB)
[ 122.569451] c1ae8b48 00000082 c013565a c0189922 f77225b0 f7722aec c013565a 6b85fe83
[ 122.569795] 0000000f f7722aec f77225b0 00000000 c037850f 00000002 f77225b0 f3b775b0
[ 122.570182] 6bbda949 0000000f 0033a8e3 00000000 f77226bc c1828dc0 f77225b0 c03782fd
[ 122.570569] Call Trace:
[ 122.570664] [<c0377bdb>] schedule_timeout+0x6e/0xac
[ 122.570756] [<c016ee05>] do_select+0x3bb/0x49c
[ 122.570846] [<c016f0c0>] core_sys_select+0x1da/0x322
[ 122.570937] [<c016f835>] sys_select+0x3f/0x1b6
[ 122.571026] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.571118] [<b7f55410>] 0xb7f55410
[ 122.571207] =======================
[ 122.571258] ksuspend_usbd S F5AD6F6C 0 1818 11 1819 851 (L-TLB)
[ 122.571538] f5ad6f80 00000082 00000002 f5ad6f6c f5ad6f68 00000000 f6848f3c d612673f
[ 122.571882] 0000000c c0634718 00000046 00000000 00000000 00000007 f5ad55b0 c19895b0
[ 122.572268] d618f11f 0000000c 00014068 00000001 f5ad56bc c1830dc0 c0522140 c0134ddc
[ 122.572655] Call Trace:
[ 122.572750] [<c012be09>] worker_thread+0x106/0x13d
[ 122.572841] [<c012e5bd>] kthread+0xde/0xe2
[ 122.572931] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.573022] =======================
[ 122.573072] khubd S C013565A 0 1819 11 1887 1818 (L-TLB)
[ 122.573353] f5adcf38 00000086 f5adfaec c013565a 00000000 f899c9d4 f5adf5b0 31877fa3
[ 122.573697] 00000004 00000076 c182974c 00000000 f899c9d4 0000000a f5adf5b0 f74d95b0
[ 122.574084] 31932dee 00000004 00004f8b 00000000 f5adf6bc c1828dc0 00000000 c1830dc0
[ 122.574471] Call Trace:
[ 122.574566] [<f8983266>] hub_thread+0x52a/0xc72 [usbcore]
[ 122.574680] [<c012e5bd>] kthread+0xde/0xe2
[ 122.574770] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.574861] =======================
[ 122.574912] khpsbpkt S 00000000 0 1887 11 1902 1819 (L-TLB)
[ 122.575192] f74c7fc0 00000082 00000000 00000000 c1bff5b0 00000000 f8a81640 81b0d1cf
[ 122.575536] 00000004 c1bff5b0 00000046 00000001 c1bff5b0 0000000a c1bff5b0 f767c5b0
[ 122.575922] 81cc46cf 00000004 00019f44 00000000 c1bff6bc c1828dc0 f8a8162c 00000286
[ 122.576309] Call Trace:
[ 122.576404] [<f8a3c606>] hpsbpkt_thread+0x85/0x87 [ieee1394]
[ 122.576509] [<c012e5bd>] kthread+0xde/0xe2
[ 122.576600] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.576691] =======================
[ 122.576741] kgameportd S 00000006 0 1902 11 1956 1887 (L-TLB)
[ 122.577729] f5f85f74 00000086 c013565a 00000006 00000000 f89f2f94 f74b15b0 0ccd8a37
[ 122.578073] 00000004 00000076 c182974c 00000001 f89f2f94 00000004 f74b15b0 f767c5b0
[ 122.578459] 0cfd71eb 00000004 00017f35 00000000 f74b16bc c1828dc0 0000005b c1830dc0
[ 122.578846] Call Trace:
[ 122.578941] [<f89f0aa5>] gameport_thread+0xb1/0x41d [gameport]
[ 122.579042] [<c012e5bd>] kthread+0xde/0xe2
[ 122.579132] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.579223] =======================
[ 122.579274] knodemgrd_0 S 00000000 0 1956 11 1966 1902 (L-TLB)
[ 122.579554] f5a6ff5c 00000092 000000b7 00000000 0000000f 0130ec80 00000000 71066bec
[ 122.579897] 00000004 00000076 c183174c 00000000 00000000 0000000a f5aa65b0 f761c5b0
[ 122.580284] 7118757b 00000004 00b02de1 00000001 f5aa66bc c1830dc0 c1accf3c c1828dc0
[ 122.580671] Call Trace:
[ 122.580765] [<f8a4193f>] nodemgr_host_thread+0x4fa/0xa2c [ieee1394]
[ 122.580885] [<c012e5bd>] kthread+0xde/0xe2
[ 122.580976] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.581066] =======================
[ 122.581117] knodemgrd_1 S F767C5B0 0 1966 11 1981 1956 (L-TLB)
[ 122.581398] c1accf5c 00000092 00000000 f767c5b0 c03782fd 00000246 f55aaa54 822a0c7c
[ 122.581742] 00000004 00000074 c182974c 00000000 f767cae0 00000009 f767c5b0 f77225b0
[ 122.582129] 82592efc 00000004 006f86e7 00000000 f767c6bc c1828dc0 f55f4000 c1830dc0
[ 122.582516] Call Trace:
[ 122.582611] [<f8a4193f>] nodemgr_host_thread+0x4fa/0xa2c [ieee1394]
[ 122.582729] [<c012e5bd>] kthread+0xde/0xe2
[ 122.582820] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.582911] =======================
[ 122.582962] kpsmoused S F74D7F6C 0 1981 11 2319 1966 (L-TLB)
[ 122.583242] f74d7f80 00000082 00000002 f74d7f6c f74d7f68 00000000 f553bf3c 38d60be2
[ 122.583585] 00000004 c0634718 00000046 00000000 00000000 00000001 f74e25b0 c03f54e0
[ 122.583972] 38dd2235 00000004 000022a0 00000000 f74e26bc c1828dc0 c0522140 c0134ddc
[ 122.584359] Call Trace:
[ 122.584454] [<c012be09>] worker_thread+0x106/0x13d
[ 122.584545] [<c012e5bd>] kthread+0xde/0xe2
[ 122.584634] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.584725] =======================
[ 122.584776] dhclient3 S C1AC1B34 0 2300 1 2313 1047 (NOTLB)
[ 122.585056] c1ac1b48 00000082 00000002 c1ac1b34 c1ac1b30 00000000 c1ad45b0 a892ea39
[ 122.585399] 00000005 c1ad45b0 c1ad4ae0 00000000 c1ad45b0 00000006 c1ad45b0 c19895b0
[ 122.585787] a893ea9e 00000005 0000e063 00000001 c1ad46bc c1830dc0 c0522140 c0379c31
[ 122.586174] Call Trace:
[ 122.586268] [<c0377bb6>] schedule_timeout+0x49/0xac
[ 122.586361] [<c016ee05>] do_select+0x3bb/0x49c
[ 122.586451] [<c016f0c0>] core_sys_select+0x1da/0x322
[ 122.586542] [<c016f8da>] sys_select+0xe4/0x1b6
[ 122.586632] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.586724] [<b7fcf410>] 0xb7fcf410
[ 122.586812] =======================
[ 122.586863] portmap S F5A6B5B0 0 2313 1 2321 2300 (NOTLB)
[ 122.587144] f7623bf8 00000086 f5a6b5b0 f5a6b5b0 f5a6baec c013565a c012e8b4 4db5bebb
[ 122.587488] 0000000c f5a6b5b0 c183174c 00000000 00000000 0000000a f5a6b5b0 f3ac75b0
[ 122.587875] 4de255e2 0000000c 0004fec6 00000001 f5a6b6bc c1830dc0 00000000 c1828dc0
[ 122.588262] Call Trace:
[ 122.588356] [<c0377bdb>] schedule_timeout+0x6e/0xac
[ 122.588448] [<c016e8ee>] do_sys_poll+0x2d5/0x3f8
[ 122.588540] [<c016ea3c>] sys_poll+0x2b/0x39
[ 122.588630] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.588722] [<b7f37410>] 0xb7f37410
[ 122.588811] =======================
[ 122.588861] rpciod/0 S 00000000 0 2319 11 2320 1981 (L-TLB)
[ 122.589142] f551ff80 00000082 f5ab05b0 00000000 f5a67fec 00000000 f5ecef3c f8129e2b
[ 122.589486] 00000005 c0634718 00000046 00000002 00000000 00000009 f5ab05b0 c19b65b0
[ 122.589873] f81feaea 00000005 000057a8 00000000 f5ab06bc c1828dc0 f551ff9c c0134ddc
[ 122.590260] Call Trace:
[ 122.590355] [<c012be09>] worker_thread+0x106/0x13d
[ 122.590446] [<c012e5bd>] kthread+0xde/0xe2
[ 122.590536] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.590627] =======================
[ 122.590678] rpciod/1 S F59FBF6C 0 2320 11 2319 (L-TLB)
[ 122.590958] f59fbf80 00000082 00000002 f59fbf6c f59fbf68 00000000 f56a4f3c f8138c84
[ 122.591302] 00000005 c0634718 00000046 00000000 00000000 00000008 f5f595b0 c19895b0
[ 122.591688] f828b2df 00000005 00001a22 00000001 f5f596bc c1830dc0 c0522140 c0134ddc
[ 122.592075] Call Trace:
[ 122.592169] [<c012be09>] worker_thread+0x106/0x13d
[ 122.592261] [<c012e5bd>] kthread+0xde/0xe2
[ 122.592350] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.592441] =======================
[ 122.592492] lockd S F7C22F40 0 2321 1 2825 2313 (L-TLB)
[ 122.592772] f7c22f54 00000082 00000002 f7c22f40 f7c22f3c 00000002 c05c8ba0 2482b881
[ 122.593116] 0000000c f7550b14 c013565a 00000006 00000003 0000000a f75505b0 c19895b0
[ 122.593502] 24a20882 0000000c 00008bb0 00000001 f75506bc c1830dc0 c0522140 00000000
[ 122.593889] Call Trace:
[ 122.593984] [<c0377bdb>] schedule_timeout+0x6e/0xac
[ 122.594076] [<c0369130>] svc_recv+0x1a5/0x3d5
[ 122.594168] [<c01ec793>] lockd+0xe3/0x240
[ 122.594261] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.594352] =======================
[ 122.594403] login S F4203F28 0 2825 1 3720 2826 2321 (NOTLB)
[ 122.594685] f4203f3c 00000092 00000002 f4203f28 f4203f24 00000000 f5f91e84 093edcb0
[ 122.595029] 0000000d c0634718 00000000 c0483c14 c1a5e5b0 00000008 c1a5e5b0 c03f54e0
[ 122.595416] 0959ba53 0000000d 0000c359 00000000 c1a5e6bc c1828dc0 c0522140 c011e6ad
[ 122.595804] Call Trace:
[ 122.595899] [<c011ed25>] do_wait+0x6e1/0xb31
[ 122.595991] [<c011f1a6>] sys_wait4+0x31/0x35
[ 122.596081] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.596173] [<b7f4c410>] 0xb7f4c410
[ 122.596262] =======================
[ 122.596313] login S C013565A 0 2826 1 3808 2827 2825 (NOTLB)
[ 122.596594] c1ad5f3c 00000092 f7566aec c013565a c011e6ad 00000000 f5e32e84 548afcd3
[ 122.596938] 00000010 00000078 c182974c 00000001 f75665b0 00000008 f75665b0 f76845b0
[ 122.597325] 5497c5e6 00000010 00053e68 00000000 f75666bc c1828dc0 00000000 c1830dc0
[ 122.597712] Call Trace:
[ 122.597807] [<c011ed25>] do_wait+0x6e1/0xb31
[ 122.597899] [<c011f1a6>] sys_wait4+0x31/0x35
[ 122.597989] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.598081] [<b7f77410>] 0xb7f77410
[ 122.598169] =======================
[ 122.598220] getty S F7569EB4 0 2827 1 2828 2826 (NOTLB)
[ 122.598501] f7569ec8 00000086 00000002 f7569eb4 f7569eb0 00000002 c05ca7c0 4fbf0418
[ 122.598845] 00000009 c1a9fb14 c013565a 00000006 00000003 00000007 c1a9f5b0 c19895b0
[ 122.599232] 4fc89fd3 00000009 00097ae7 00000001 c1a9f6bc c1830dc0 c0522140 00000000
[ 122.599619] Call Trace:
[ 122.599713] [<c0377bdb>] schedule_timeout+0x6e/0xac
[ 122.599805] [<c02495cd>] read_chan+0x1d0/0x613
[ 122.599898] [<c024624f>] tty_read+0x78/0xbe
[ 122.599988] [<c0163858>] vfs_read+0x89/0x145
[ 122.600080] [<c0163d0e>] sys_read+0x41/0x6a
[ 122.600170] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.600262] [<b7f60410>] 0xb7f60410
[ 122.600350] =======================
[ 122.600401] getty S F74A95B0 0 2828 1 2829 2827 (NOTLB)
[ 122.600681] c1a73ec8 00000086 000001df f74a95b0 f74a9b14 00000002 c05ca7c0 517247d4
[ 122.601025] 00000009 f74a9b14 c013565a 00000000 00000003 00000007 f74a95b0 f5a5d5b0
[ 122.601412] 5187ea91 00000009 000f9900 00000000 f74a96bc c1828dc0 00000046 00000000
[ 122.601799] Call Trace:
[ 122.601894] [<c0377bdb>] schedule_timeout+0x6e/0xac
[ 122.601987] [<c02495cd>] read_chan+0x1d0/0x613
[ 122.602079] [<c024624f>] tty_read+0x78/0xbe
[ 122.602169] [<c0163858>] vfs_read+0x89/0x145
[ 122.602260] [<c0163d0e>] sys_read+0x41/0x6a
[ 122.603056] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.603148] [<b7fc0410>] 0xb7fc0410
[ 122.603236] =======================
[ 122.603287] getty S F59DDEB4 0 2829 1 2830 2828 (NOTLB)
[ 122.603568] f59ddec8 00000086 00000002 f59ddeb4 f59ddeb0 00000002 c012e8b4 4c69f7e1
[ 122.603912] 00000009 f761cb14 c013565a c012e8b4 00000003 00000007 f761c5b0 c19895b0
[ 122.604299] 4c7f00a6 00000009 0014ec90 00000001 f761c6bc c1830dc0 c0522140 00000000
[ 122.604686] Call Trace:
[ 122.604781] [<c0377bdb>] schedule_timeout+0x6e/0xac
[ 122.604872] [<c02495cd>] read_chan+0x1d0/0x613
[ 122.604964] [<c024624f>] tty_read+0x78/0xbe
[ 122.605053] [<c0163858>] vfs_read+0x89/0x145
[ 122.605144] [<c0163d0e>] sys_read+0x41/0x6a
[ 122.605233] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.605325] [<b7f8e410>] 0xb7f8e410
[ 122.605414] =======================
[ 122.605464] getty S F76195B0 0 2830 1 3053 2829 (NOTLB)
[ 122.605745] f4231ec8 00000086 000001df f76195b0 f7619b14 00000002 c05ca7c0 52206c78
[ 122.606090] 00000009 f7619b14 c182974c 00000000 00000003 00000007 f76195b0 f755c5b0
[ 122.606477] 523bcac0 00000009 00197682 00000000 f76196bc c1828dc0 00000046 c1830dc0
[ 122.606864] Call Trace:
[ 122.606958] [<c0377bdb>] schedule_timeout+0x6e/0xac
[ 122.607050] [<c02495cd>] read_chan+0x1d0/0x613
[ 122.607141] [<c024624f>] tty_read+0x78/0xbe
[ 122.607231] [<c0163858>] vfs_read+0x89/0x145
[ 122.607321] [<c0163d0e>] sys_read+0x41/0x6a
[ 122.607410] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.607502] [<b7f8e410>] 0xb7f8e410
[ 122.607591] =======================
[ 122.607642] acpid S F7787AEC 0 3053 1 3171 2830 (NOTLB)
[ 122.607923] f562bbf8 00000086 f77875b0 f7787aec c013565a c012e8b4 f77875b0 f416843b
[ 122.608267] 0000000a 00000078 c182974c 00000000 f6fe8d9c 00000009 f77875b0 f49965b0
[ 122.608654] f4333f90 0000000a 00178d42 00000000 f77876bc c1828dc0 f77875b0 c1830dc0
[ 122.609041] Call Trace:
[ 122.609135] [<c0377bdb>] schedule_timeout+0x6e/0xac
[ 122.609227] [<c016e8ee>] do_sys_poll+0x2d5/0x3f8
[ 122.609318] [<c016ea3c>] sys_poll+0x2b/0x39
[ 122.609408] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.609500] [<b7fd3410>] 0xb7fd3410
[ 122.609589] =======================
[ 122.609640] syslogd S F76845B0 0 3171 1 3203 3053 (NOTLB)
[ 122.609920] f5a5eb48 00000082 f76845b0 f76845b0 f7684aec c013565a c012e8b4 ee19d8b2
[ 122.610264] 00000017 00000078 c182974c 00000000 00000000 0000000a f76845b0 f764c5b0
[ 122.610651] ee325d29 00000017 00115bb2 00000000 f76846bc c1828dc0 00000000 c1830dc0
[ 122.611038] Call Trace:
[ 122.611133] [<c0377bdb>] schedule_timeout+0x6e/0xac
[ 122.611224] [<c016ee05>] do_select+0x3bb/0x49c
[ 122.611314] [<c016f0c0>] core_sys_select+0x1da/0x322
[ 122.611405] [<c016f835>] sys_select+0x3f/0x1b6
[ 122.611495] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.611587] [<b7f0c410>] 0xb7f0c410
[ 122.611676] =======================
[ 122.611726] dd R running 0 3203 1 3205 3171 (NOTLB)
[ 122.612006] klogd S F551DE4C 0 3205 1 3215 3203 (NOTLB)
[ 122.612286] f551de60 00000086 00000002 f551de4c f551de48 f58d9e0c f764c5b0 ee19d8b2
[ 122.612631] 00000017 00000046 00000000 f764c5b0 f764cae0 00000009 f764c5b0 c03f54e0
[ 122.613017] ee32a544 00000017 0000481b 00000000 f764c6bc c1828dc0 c0522140 f425ce40
[ 122.613404] Call Trace:
[ 122.613499] [<c0168f37>] pipe_wait+0x56/0x79
[ 122.613590] [<c0169580>] pipe_read+0xda/0x3fa
[ 122.613681] [<c016302f>] do_sync_read+0xd5/0x111
[ 122.613772] [<c0163858>] vfs_read+0x89/0x145
[ 122.613862] [<c0163d0e>] sys_read+0x41/0x6a
[ 122.613951] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.614043] [<b7f83410>] 0xb7f83410
[ 122.614131] =======================
[ 122.614182] kdm S F5B51B34 0 3215 1 3255 3205 (NOTLB)
[ 122.614462] f5b51b48 00000082 00000002 f5b51b34 f5b51b30 c012e8b4 c012e8b4 861f4f98
[ 122.614806] 0000000a 00000078 00000000 00000000 f62d4d9c 00000009 f55205b0 c19895b0
[ 122.615193] 86571504 0000000a 00117915 00000001 f55206bc c1830dc0 c0522140 f5520ae0
[ 122.615580] Call Trace:
[ 122.615675] [<c0377bdb>] schedule_timeout+0x6e/0xac
[ 122.615766] [<c016ee05>] do_select+0x3bb/0x49c
[ 122.615856] [<c016f0c0>] core_sys_select+0x1da/0x322
[ 122.615947] [<c016f835>] sys_select+0x3f/0x1b6
[ 122.616037] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.616128] [<b7fde410>] 0xb7fde410
[ 122.616217] =======================
[ 122.616267] cupsd S F5521B34 0 3255 1 3278 3215 (NOTLB)
[ 122.616548] f5521b48 00000082 00000002 f5521b34 f5521b30 c013565a c012e8b4 459e78b3
[ 122.616891] 0000000a 00000000 00000000 00000000 00000000 00000007 c1a925b0 c19895b0
[ 122.617277] 459fc8dc 0000000a 0000a90c 00000001 c1a926bc c1830dc0 c0522140 c1a925b0
[ 122.617665] Call Trace:
[ 122.617760] [<c0377bdb>] schedule_timeout+0x6e/0xac
[ 122.617851] [<c016ee05>] do_select+0x3bb/0x49c
[ 122.617941] [<c016f0c0>] core_sys_select+0x1da/0x322
[ 122.618032] [<c016f835>] sys_select+0x3f/0x1b6
[ 122.618122] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.618214] [<b7fd5410>] 0xb7fd5410
[ 122.618302] =======================
[ 122.618353] hpiod S F5B07E30 0 3278 1 3282 3255 (NOTLB)
[ 122.618633] f5b07e44 00200086 00000002 f5b07e30 f5b07e2c 00000000 f5a5d5b0 257c7552
[ 122.618977] 0000000a c013565a c02f9acc 00000003 c03bf66b 00000001 f5a5d5b0 c03f54e0
[ 122.619364] 257efee1 0000000a 0002c248 00000000 f5a5d6bc c1828dc0 c0522140 00000000
[ 122.619751] Call Trace:
[ 122.619845] [<c0377bdb>] schedule_timeout+0x6e/0xac
[ 122.619937] [<c0326010>] inet_csk_accept+0x106/0x229
[ 122.620031] [<c034287d>] inet_accept+0x1f/0xa5
[ 122.620122] [<c02f8ea4>] sys_accept+0xf2/0x1e7
[ 122.620214] [<c02f905f>] sys_socketcall+0xc6/0x271
[ 122.620305] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.620397] [<b7fbe410>] 0xb7fbe410
[ 122.620485] =======================
[ 122.620536] python S F429AB34 0 3282 1 3341 3278 (NOTLB)
[ 122.620816] f429ab48 00200082 00000002 f429ab34 f429ab30 00000000 f5a585b0 76ad1475
[ 122.621159] 0000001c f5a585b0 f5a58ae0 00000000 f5a585b0 0000000a f5a585b0 c03f54e0
[ 122.621546] 76ada67a 0000001c 000077d2 00000000 f5a586bc c1828dc0 c0522140 c0379c31
[ 122.621934] Call Trace:
[ 122.622029] [<c0377bb6>] schedule_timeout+0x49/0xac
[ 122.622120] [<c016ee05>] do_select+0x3bb/0x49c
[ 122.622211] [<c016f0c0>] core_sys_select+0x1da/0x322
[ 122.622301] [<c016f8da>] sys_select+0xe4/0x1b6
[ 122.622391] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.622483] [<b7fa8410>] 0xb7fa8410
[ 122.622571] =======================
[ 122.622622] apt-index-wat S F5923F30 0 3341 1 3367 3282 (NOTLB)
[ 122.622902] f5923f44 00000086 00000002 f5923f30 f5923f2c 00000000 f77255b0 0c483827
[ 122.623245] 0000001c f77255b0 c0379c47 c1829cd0 00000000 0000000a f77255b0 c03f54e0
[ 122.623632] 0c701300 0000001c 0027bc51 00000000 f77256bc c1828dc0 c0522140 c0131336
[ 122.624019] Call Trace:
[ 122.624114] [<c037892f>] do_nanosleep+0x55/0x70
[ 122.624205] [<c01313ab>] hrtimer_nanosleep+0x3d/0xf1
[ 122.624296] [<c01314b7>] sys_nanosleep+0x58/0x5c
[ 122.624386] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.624478] [<b7f3b410>] 0xb7f3b410
[ 122.624567] =======================
[ 122.624617] dbus-daemon S F4999BE4 0 3367 1 3388 3341 (NOTLB)
[ 122.624898] f4999bf8 00000086 00000002 f4999be4 f4999be0 c012e8b4 00000000 1ad5df66
[ 122.625241] 0000000f 00000074 00000000 00000000 f38f8d9c 0000000a f49985b0 c03f54e0
[ 122.625628] 1adc7579 0000000f 00078d3f 00000000 f49986bc c1828dc0 c0522140 f4998ae0
[ 122.626015] Call Trace:
[ 122.626110] [<c0377bdb>] schedule_timeout+0x6e/0xac
[ 122.626202] [<c016e8ee>] do_sys_poll+0x2d5/0x3f8
[ 122.626293] [<c016ea3c>] sys_poll+0x2b/0x39
[ 122.626383] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.627182] [<b7fde410>] 0xb7fde410
[ 122.627271] =======================
[ 122.627322] hald S F429BBE4 0 3388 1 3389 3461 3367 (NOTLB)
[ 122.627603] f429bbf8 00000086 00000002 f429bbe4 f429bbe0 00000000 f74d35b0 e197dd78
[ 122.627946] 00000018 f74d35b0 f74d3ae0 00000000 f74d35b0 00000008 f74d35b0 c03f54e0
[ 122.628333] e19d4efa 00000018 00054b85 00000000 f74d36bc c1828dc0 c0522140 c0379c31
[ 122.628720] Call Trace:
[ 122.628815] [<c0377bb6>] schedule_timeout+0x49/0xac
[ 122.628906] [<c016e8ee>] do_sys_poll+0x2d5/0x3f8
[ 122.628997] [<c016ea3c>] sys_poll+0x2b/0x39
[ 122.629087] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.629179] [<b7fc9410>] 0xb7fc9410
[ 122.629267] =======================
[ 122.629318] hald-runner S C1A4FBE4 0 3389 3388 3395 (NOTLB)
[ 122.629598] c1a4fbf8 00000086 00000002 c1a4fbe4 c1a4fbe0 c012e8b4 00000000 e793fa4e
[ 122.629942] 0000000b 00000000 00000000 00000000 f43b1d9c 00000009 f40995b0 c19895b0
[ 122.630328] e7b7456a 0000000b 00001292 00000001 f40996bc c1830dc0 c0522140 f4099ae0
[ 122.630715] Call Trace:
[ 122.630810] [<c0377bdb>] schedule_timeout+0x6e/0xac
[ 122.630902] [<c016e8ee>] do_sys_poll+0x2d5/0x3f8
[ 122.630993] [<c016ea3c>] sys_poll+0x2b/0x39
[ 122.631083] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.631175] [<b7f0e410>] 0xb7f0e410
[ 122.631263] =======================
[ 122.631314] hald-addon-ac S F562DDA8 0 3395 3389 3397 (NOTLB)
[ 122.631595] f562ddbc 00000096 00000002 f562dda8 f562dda4 c05c0c20 f49965b0 f416843b
[ 122.631939] 0000000a c013565a 00000006 00000003 c03bf66b 00000006 f49965b0 c03f54e0
[ 122.632325] f4347f17 0000000a 00013f87 00000000 f49966bc c1828dc0 c0522140 00000000
[ 122.632712] Call Trace:
[ 122.632807] [<c0377bdb>] schedule_timeout+0x6e/0xac
[ 122.632898] [<c035bd40>] unix_stream_recvmsg+0x343/0x4ef
[ 122.632992] [<c02f7515>] sock_aio_read+0xd5/0xee
[ 122.633083] [<c016302f>] do_sync_read+0xd5/0x111
[ 122.633174] [<c016390d>] vfs_read+0x13e/0x145
[ 122.633264] [<c0163d0e>] sys_read+0x41/0x6a
[ 122.633353] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.633445] [<b7fcd410>] 0xb7fcd410
[ 122.633534] =======================
[ 122.633585] hald-addon-ke S F49C5F38 0 3397 3389 3414 3395 (NOTLB)
[ 122.633865] f49c5f4c 00000096 00000002 f49c5f38 f49c5f34 f54fe800 f74d05b0 83c45f4b
[ 122.634208] 0000001c 00000046 00000000 00000000 f54fe800 0000000a f74d05b0 c03f54e0
[ 122.634595] 83c865db 0000001c 00001f60 00000000 f74d06bc c1828dc0 c0522140 c0134ddc
[ 122.634982] Call Trace:
[ 122.635077] [<f8a24d81>] evdev_read+0xa5/0x17c [evdev]
[ 122.635174] [<c0163858>] vfs_read+0x89/0x145
[ 122.635265] [<c0163d0e>] sys_read+0x41/0x6a
[ 122.635354] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.635446] [<b7f2b410>] 0xb7f2b410
[ 122.635534] =======================
[ 122.635585] hald-addon-st S F6217F30 0 3414 3389 3397 (NOTLB)
[ 122.635865] f6217f44 00000086 00000002 f6217f30 f6217f2c 00000000 f74d95b0 3b68df01
[ 122.636209] 0000001c f74d95b0 c0379c47 c1829cd0 00000000 00000009 f74d95b0 c03f54e0
[ 122.636596] 3ba0a98d 0000001c 00006a88 00000000 f74d96bc c1828dc0 c0522140 c0131336
[ 122.636983] Call Trace:
[ 122.637077] [<c037892f>] do_nanosleep+0x55/0x70
[ 122.637169] [<c01313ab>] hrtimer_nanosleep+0x3d/0xf1
[ 122.637259] [<c01314b7>] sys_nanosleep+0x58/0x5c
[ 122.637349] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.637441] [<b7f82410>] 0xb7f82410
[ 122.637530] =======================
[ 122.637581] nfsd S 00000046 0 3461 1 3465 3388 (L-TLB)
[ 122.637861] f7687f3c 00000092 c0634740 00000046 00000000 00000000 f39445b0 24fc95c0
[ 122.638205] 0000000c f39445b0 c183174c 00000001 f39445b0 00000007 f39445b0 f755c5b0
[ 122.638592] 251f4fbc 0000000c 0004fbb6 00000001 f39446bc c1830dc0 000cc9ef c1828dc0
[ 122.638979] Call Trace:
[ 122.639074] [<c0377bb6>] schedule_timeout+0x49/0xac
[ 122.639166] [<c0369130>] svc_recv+0x1a5/0x3d5
[ 122.639256] [<c01dcaa1>] nfsd+0xc7/0x296
[ 122.639348] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.639439] =======================
[ 122.639490] nfsd S 00000046 0 3462 1 3463 3468 (L-TLB)
[ 122.639771] f48e5f3c 00000092 c0634740 00000046 00000000 00000000 f755c5b0 24fc95c0
[ 122.640115] 0000000c 00000078 c183174c 00000002 f755c5b0 00000001 f755c5b0 f7c2c5b0
[ 122.640502] 25204d80 0000000c 0000fdc4 00000001 f755c6bc c1830dc0 000cc9ef c1828dc0
[ 122.640889] Call Trace:
[ 122.640983] [<c0377bb6>] schedule_timeout+0x49/0xac
[ 122.641075] [<c0369130>] svc_recv+0x1a5/0x3d5
[ 122.641165] [<c01dcaa1>] nfsd+0xc7/0x296
[ 122.641255] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.641346] =======================
[ 122.641396] nfsd S C1A67F28 0 3463 1 3464 3462 (L-TLB)
[ 122.641677] c1a67f3c 00000092 00000002 c1a67f28 c1a67f24 00000000 f76225b0 2a3909ee
[ 122.642020] 0000000c f76225b0 f7622ae0 00000000 f76225b0 00000001 f76225b0 c03f54e0
[ 122.642407] 2a4f3ed7 0000000c 0001e0e5 00000000 f76226bc c1828dc0 c0522140 c0379c31
[ 122.642794] Call Trace:
[ 122.642889] [<c0377bb6>] schedule_timeout+0x49/0xac
[ 122.642980] [<c0369130>] svc_recv+0x1a5/0x3d5
[ 122.643071] [<c01dcaa1>] nfsd+0xc7/0x296
[ 122.643160] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.643252] =======================
[ 122.643302] nfsd S F39EDF28 0 3464 1 3472 3463 (L-TLB)
[ 122.643583] f39edf3c 00000092 00000002 f39edf28 f39edf24 00000000 f39425b0 2a39d88c
[ 122.643926] 0000000c f39425b0 f3942ae0 00000000 f39425b0 00000001 f39425b0 c19895b0
[ 122.644313] 2a595882 0000000c 000d55a4 00000001 f39426bc c1830dc0 c0522140 c0379c31
[ 122.644701] Call Trace:
[ 122.644795] [<c0377bb6>] schedule_timeout+0x49/0xac
[ 122.644886] [<c0369130>] svc_recv+0x1a5/0x3d5
[ 122.644976] [<c01dcaa1>] nfsd+0xc7/0x296
[ 122.645066] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.645157] =======================
[ 122.645208] nfsd S 00000046 0 3465 1 3466 3461 (L-TLB)
[ 122.645488] f3a13f3c 00000092 c0633878 00000046 00000000 00000000 f40a15b0 2510285c
[ 122.645832] 0000000c f40a15b0 c182974c 00000000 f40a15b0 00000001 f40a15b0 f3a3d5b0
[ 122.646219] 251d5c37 0000000c 0000847c 00000000 f40a16bc c1828dc0 000cc9ef c1830dc0
[ 122.646606] Call Trace:
[ 122.646701] [<c0377bb6>] schedule_timeout+0x49/0xac
[ 122.646792] [<c0369130>] svc_recv+0x1a5/0x3d5
[ 122.646883] [<c01dcaa1>] nfsd+0xc7/0x296
[ 122.646973] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.647063] =======================
[ 122.647114] nfsd S 00000046 0 3466 1 3467 3465 (L-TLB)
[ 122.647394] f3a3ef3c 00000092 c0633878 00000046 00000000 00000000 f3a3d5b0 2510285c
[ 122.647738] 0000000c f3a3d5b0 c182974c 00000000 f3a3d5b0 00000001 f3a3d5b0 f3a675b0
[ 122.648125] 251dd858 0000000c 00007c21 00000000 f3a3d6bc c1828dc0 000cc9ef c1830dc0
[ 122.648512] Call Trace:
[ 122.648606] [<c0377bb6>] schedule_timeout+0x49/0xac
[ 122.648698] [<c0369130>] svc_recv+0x1a5/0x3d5
[ 122.648788] [<c01dcaa1>] nfsd+0xc7/0x296
[ 122.648878] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.648969] =======================
[ 122.649020] nfsd S 00000046 0 3467 1 3468 3466 (L-TLB)
[ 122.649300] f3a68f3c 00000092 c0633878 00000046 00000000 00000000 f3a675b0 2510285c
[ 122.649644] 0000000c f3a675b0 c182974c 00000000 f3a675b0 00000001 f3a675b0 f3a915b0
[ 122.650031] 251e4d96 0000000c 0000753e 00000000 f3a676bc c1828dc0 000cc9ef c1830dc0
[ 122.650418] Call Trace:
[ 122.650512] [<c0377bb6>] schedule_timeout+0x49/0xac
[ 122.650604] [<c0369130>] svc_recv+0x1a5/0x3d5
[ 122.650695] [<c01dcaa1>] nfsd+0xc7/0x296
[ 122.650784] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.650875] =======================
[ 122.650926] nfsd S F3A92F28 0 3468 1 3462 3467 (L-TLB)
[ 122.651916] f3a92f3c 00000092 00000002 f3a92f28 f3a92f24 00000000 f3a915b0 2510285c
[ 122.652259] 0000000c f3a915b0 f3a91ae0 00000000 f3a915b0 00000001 f3a915b0 c03f54e0
[ 122.652646] 251ec274 0000000c 000074de 00000000 f3a916bc c1828dc0 c0522140 c0379c31
[ 122.653033] Call Trace:
[ 122.653128] [<c0377bb6>] schedule_timeout+0x49/0xac
[ 122.653219] [<c0369130>] svc_recv+0x1a5/0x3d5
[ 122.653309] [<c01dcaa1>] nfsd+0xc7/0x296
[ 122.653399] [<c0103b33>] kernel_thread_helper+0x7/0x14
[ 122.653490] =======================
[ 122.653541] rpc.mountd S F754C5B0 0 3472 1 3538 3464 (NOTLB)
[ 122.653822] f3abfb48 00000082 f754c5b0 f754c5b0 f754caec c013565a c012e8b4 2f396a0f
[ 122.654166] 0000000c f754c5b0 c182974c 00000000 00000000 00000001 f754c5b0 f77815b0
[ 122.654553] 2f5614ea 0000000c 000881d5 00000000 f754c6bc c1828dc0 00000000 c1830dc0
[ 122.654939] Call Trace:
[ 122.655034] [<c0377bdb>] schedule_timeout+0x6e/0xac
[ 122.655125] [<c016ee05>] do_select+0x3bb/0x49c
[ 122.655215] [<c016f0c0>] core_sys_select+0x1da/0x322
[ 122.655306] [<c016f835>] sys_select+0x3f/0x1b6
[ 122.655396] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.655488] [<b7ee7410>] 0xb7ee7410
[ 122.655577] =======================
[ 122.655628] rpc.statd S F7C2C5B0 0 3538 1 3621 3472 (NOTLB)
[ 122.655908] f5f58b48 00000082 f7c2c5b0 f7c2c5b0 f7c2caec c013565a c012e8b4 4def3903
[ 122.656252] 0000000c f7c2c5b0 c182974c 00000000 00000000 00000007 f7c2c5b0 f3ac75b0
[ 122.656639] 4df126cc 0000000c 0007f440 00000000 f7c2c6bc c1828dc0 00000000 c1830dc0
[ 122.657026] Call Trace:
[ 122.657121] [<c0377bdb>] schedule_timeout+0x6e/0xac
[ 122.657212] [<c016ee05>] do_select+0x3bb/0x49c
[ 122.657302] [<c016f0c0>] core_sys_select+0x1da/0x322
[ 122.657393] [<c016f835>] sys_select+0x3f/0x1b6
[ 122.657484] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.657576] [<b7ef1410>] 0xb7ef1410
[ 122.657665] =======================
[ 122.657716] atd S F3B6E5B0 0 3621 1 3640 3538 (NOTLB)
[ 122.657996] f3b6ff44 00000086 c1829ce8 f3b6e5b0 00000000 00000000 f3b6e5b0 75e99d06
[ 122.658340] 0000000c f3b6e5b0 c182974c 00000000 00000000 00000001 f3b6e5b0 f49c45b0
[ 122.658727] 75fbf574 0000000c 001388c5 00000000 f3b6e6bc c1828dc0 f3b6ff6c c1830dc0
[ 122.659114] Call Trace:
[ 122.659209] [<c037892f>] do_nanosleep+0x55/0x70
[ 122.659300] [<c01313ab>] hrtimer_nanosleep+0x3d/0xf1
[ 122.659390] [<c01314b7>] sys_nanosleep+0x58/0x5c
[ 122.659480] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.659572] [<b7ef8410>] 0xb7ef8410
[ 122.659661] =======================
[ 122.659711] cron S F3AC6F30 0 3640 1 3807 3621 (NOTLB)
[ 122.659992] f3ac6f44 00000086 00000002 f3ac6f30 f3ac6f2c 00000000 f3ad05b0 0208c881
[ 122.660335] 00000013 f3ad05b0 c0379c47 c1829cd0 00000000 00000007 f3ad05b0 c03f54e0
[ 122.660723] 0215d3ed 00000013 000cec6a 00000000 f3ad06bc c1828dc0 c0522140 c0131336
[ 122.661110] Call Trace:
[ 122.661204] [<c037892f>] do_nanosleep+0x55/0x70
[ 122.661295] [<c01313ab>] hrtimer_nanosleep+0x3d/0xf1
[ 122.661386] [<c01314b7>] sys_nanosleep+0x58/0x5c
[ 122.661476] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.661568] [<b7f9d410>] 0xb7f9d410
[ 122.661657] =======================
[ 122.661707] bash S F74E7F14 0 3720 2825 3825 (NOTLB)
[ 122.661987] f74e7f28 00000086 00000002 f74e7f14 f74e7f10 00000000 f763fe84 b3ba1362
[ 122.662331] 00000012 c0634718 00000000 c0483c14 c1a465b0 00000009 c1a465b0 c19895b0
[ 122.662718] b3d0484f 00000012 0007a671 00000001 c1a466bc c1830dc0 c0522140 c011e6ad
[ 122.663105] Call Trace:
[ 122.663200] [<c011ed25>] do_wait+0x6e1/0xb31
[ 122.663291] [<c011f1a6>] sys_wait4+0x31/0x35
[ 122.663381] [<c011f1d1>] sys_waitpid+0x27/0x2b
[ 122.663471] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.663563] [<b7fa5410>] 0xb7fa5410
[ 122.663651] =======================
[ 122.663702] wpa_supplican D F4997D10 0 3807 1 3640 (NOTLB)
[ 122.663982] f4997d24 00200082 00000002 f4997d10 f4997d0c f3b775b0 f3b775b0 91154229
[ 122.664326] 00000013 c03094d5 f3b77aec 000002bb f3b775b0 0000000a f3b775b0 c03f54e0
[ 122.664713] 911620cc 00000013 0000c4d8 00000000 f3b776bc c1828dc0 c0522140 c03784ad
[ 122.665101] Call Trace:
[ 122.665195] [<c0378455>] __mutex_lock_slowpath+0xb1/0x286
[ 122.665288] [<c03094d5>] rtnetlink_rcv+0x18/0x42
[ 122.665381] [<c031408b>] netlink_data_ready+0x12/0x54
[ 122.665473] [<c0312dc5>] netlink_sendskb+0x1c/0x33
[ 122.665563] [<c0313f8b>] netlink_sendmsg+0x1b8/0x2a6
[ 122.665654] [<c02f7e40>] sock_sendmsg+0xbf/0xe1
[ 122.665744] [<c02f81bc>] sys_sendto+0x117/0x144
[ 122.665835] [<c02f8220>] sys_send+0x37/0x3b
[ 122.665924] [<c02f90db>] sys_socketcall+0x142/0x271
[ 122.666015] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.666106] [<b7f0a410>] 0xb7f0a410
[ 122.666195] =======================
[ 122.666246] bash S F3AD1EB4 0 3808 2826 (NOTLB)
[ 122.666525] f3ad1ec8 00000086 00000002 f3ad1eb4 f3ad1eb0 00000002 c05ca7c0 7cc4a518
[ 122.666869] 00000010 f5522b14 c013565a 00000006 00000003 00000001 f55225b0 c19895b0
[ 122.667257] 7cc911f8 00000010 00bb14ec 00000001 f55226bc c1830dc0 c0522140 00000000
[ 122.667644] Call Trace:
[ 122.667739] [<c0377bdb>] schedule_timeout+0x6e/0xac
[ 122.667830] [<c02495cd>] read_chan+0x1d0/0x613
[ 122.667921] [<c024624f>] tty_read+0x78/0xbe
[ 122.668010] [<c0163858>] vfs_read+0x89/0x145
[ 122.668101] [<c0163d0e>] sys_read+0x41/0x6a
[ 122.668190] [<c0102e29>] sysenter_past_esp+0x56/0x8d
[ 122.668282] [<b7f49410>] 0xb7f49410
[ 122.668371] =======================
[ 122.668422] rmmod R running 0 3825 3720 (NOTLB)
[ 122.668702]
[ 122.668703] Showing all locks held in the system:
[ 122.668808] 1 lock held by getty/2827:
[ 122.668858] #0: (&tty->atomic_read_lock){--..}, at: [<c024981d>] read_chan+0x420/0x613
[ 122.669106] 1 lock held by getty/2828:
[ 122.669156] #0: (&tty->atomic_read_lock){--..}, at: [<c024981d>] read_chan+0x420/0x613
[ 122.669402] 1 lock held by getty/2829:
[ 122.669452] #0: (&tty->atomic_read_lock){--..}, at: [<c024981d>] read_chan+0x420/0x613
[ 122.669698] 1 lock held by getty/2830:
[ 122.669748] #0: (&tty->atomic_read_lock){--..}, at: [<c024981d>] read_chan+0x420/0x613
[ 122.669997] 1 lock held by wpa_supplicant/3807:
[ 122.670048] #0: (rtnl_mutex){--..}, at: [<c03094d5>] rtnetlink_rcv+0x18/0x42
[ 122.670293] 1 lock held by bash/3808:
[ 122.670343] #0: (&tty->atomic_read_lock){--..}, at: [<c024981d>] read_chan+0x420/0x613
[ 122.670589] 1 lock held by rmmod/3825:
[ 122.670639] #0: (rtnl_mutex){--..}, at: [<f8d20a8f>] ieee80211_unregister_hw+0x39/0x23a [80211]
[ 122.670899]
[ 122.670946] =============================================
[ 122.670948]
--
Greetings Michael.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: d80211 deadlock with wpa_supplicant and rmmod
@ 2007-07-11 23:17 seventh guardian
[not found] ` <1caff7430707111617o70a534a5x2cf6b611a91f301a-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 8+ messages in thread
From: seventh guardian @ 2007-07-11 23:17 UTC (permalink / raw)
To: netdev
Hello,
First of all I'm fairly new to this list (in all, this is my first
message), so please be gentle.. I promise I will try not to waste your
precious time.
> I believe we have a deadlock in d80211.
I have it too. But I'm using iwl3945 driver, in-kernel mac80211, and a
gentoo kernel (basically a patched vanilla-2.6.22.1). My machine is a
x86_64 core 2 duo.
> The following triggers it on my 2way SMT machine with preempt.
>
> modprobe bcm43xx-d80211
> add sta0
> ifconfig sta0 up
> start wpa_supplicant on the interface
> rmmod bcm43xx-d80211
>
> After that rmmod hangs spinning and wpa_supplicant
> stays in D state.
>
> If I first kill wpa_supplicant and then rmmod the module,
> it does not deadlock.
I can trigger this way:
modprobe iwl3945
ifconfig wlan0 up
start wpa_supplicant
do some wpa_supplicant work (for instance issue a scan)
stop wpa_supplicant
Then it will deadlock (that is, wpa_supplicant will refuse to be
killed). The same thing happens if I try to modprobe the module out
(modprobe will "hang spinning" as you said). I have to ultimately
hard-shutdown my machine to bring it back to normal.
> Below is sysrq-t output. It looks like it's related to rtnl_mutex.
>
> (...)
I'm sorry for my inexperience, but I have no idea on which more data
to provide you. I will gladly help running any tests you would find
appropriate.
> --
> Greetings Michael.
Cheers,
Renato Caldas
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: d80211 deadlock with wpa_supplicant and rmmod
[not found] ` <1caff7430707111617o70a534a5x2cf6b611a91f301a-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2007-07-11 23:41 ` John W. Linville
2007-07-12 2:20 ` seventh guardian
[not found] ` <20070711234153.GB5099-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
0 siblings, 2 replies; 8+ messages in thread
From: John W. Linville @ 2007-07-11 23:41 UTC (permalink / raw)
To: seventh guardian
Cc: netdev-u79uwXL29TY76Z2rM5mHXA,
linux-wireless-u79uwXL29TY76Z2rM5mHXA
On Thu, Jul 12, 2007 at 12:17:35AM +0100, seventh guardian wrote:
> Hello,
> First of all I'm fairly new to this list (in all, this is my first
> message), so please be gentle.. I promise I will try not to waste your
> precious time.
>
> >I believe we have a deadlock in d80211.
>
> I have it too. But I'm using iwl3945 driver, in-kernel mac80211, and a
> gentoo kernel (basically a patched vanilla-2.6.22.1). My machine is a
> x86_64 core 2 duo.
>
> >The following triggers it on my 2way SMT machine with preempt.
> >
> >modprobe bcm43xx-d80211
> >add sta0
> >ifconfig sta0 up
> >start wpa_supplicant on the interface
> >rmmod bcm43xx-d80211
> >
> >After that rmmod hangs spinning and wpa_supplicant
> >stays in D state.
> >
> >If I first kill wpa_supplicant and then rmmod the module,
> >it does not deadlock.
>
> I can trigger this way:
>
> modprobe iwl3945
> ifconfig wlan0 up
> start wpa_supplicant
> do some wpa_supplicant work (for instance issue a scan)
> stop wpa_supplicant
>
> Then it will deadlock (that is, wpa_supplicant will refuse to be
> killed). The same thing happens if I try to modprobe the module out
> (modprobe will "hang spinning" as you said). I have to ultimately
> hard-shutdown my machine to bring it back to normal.
It seems you are replying to a very old original message. Since that
message was sent, linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org has become the
primary forum for wireless discussion.
Any chance you are savvy enough with git to try the wireless-dev kernel?
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-dev.git
Can you replicate the problem using those sources? If so, you may
want to attach your .config in your reply (just in case the exact
config makes a difference).
Thanks,
John
--
John W. Linville
linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: d80211 deadlock with wpa_supplicant and rmmod
2007-07-11 23:41 ` John W. Linville
@ 2007-07-12 2:20 ` seventh guardian
[not found] ` <20070711234153.GB5099-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
1 sibling, 0 replies; 8+ messages in thread
From: seventh guardian @ 2007-07-12 2:20 UTC (permalink / raw)
To: netdev, linux-wireless
[-- Attachment #1: Type: text/plain, Size: 4545 bytes --]
On 7/12/07, John W. Linville <linville@tuxdriver.com> wrote:
> On Thu, Jul 12, 2007 at 12:17:35AM +0100, seventh guardian wrote:
> > Hello,
> > First of all I'm fairly new to this list (in all, this is my first
> > message), so please be gentle.. I promise I will try not to waste your
> > precious time.
> >
> > >I believe we have a deadlock in d80211.
> >
> > I have it too. But I'm using iwl3945 driver, in-kernel mac80211, and a
> > gentoo kernel (basically a patched vanilla-2.6.22.1). My machine is a
> > x86_64 core 2 duo.
> >
> > >The following triggers it on my 2way SMT machine with preempt.
> > >
> > >modprobe bcm43xx-d80211
> > >add sta0
> > >ifconfig sta0 up
> > >start wpa_supplicant on the interface
> > >rmmod bcm43xx-d80211
> > >
> > >After that rmmod hangs spinning and wpa_supplicant
> > >stays in D state.
> > >
> > >If I first kill wpa_supplicant and then rmmod the module,
> > >it does not deadlock.
> >
> > I can trigger this way:
> >
> > modprobe iwl3945
> > ifconfig wlan0 up
> > start wpa_supplicant
> > do some wpa_supplicant work (for instance issue a scan)
> > stop wpa_supplicant
> >
> > Then it will deadlock (that is, wpa_supplicant will refuse to be
> > killed). The same thing happens if I try to modprobe the module out
> > (modprobe will "hang spinning" as you said). I have to ultimately
> > hard-shutdown my machine to bring it back to normal.
>
> It seems you are replying to a very old original message. Since that
> message was sent, linux-wireless@vger.kernel.org has become the
> primary forum for wireless discussion.
Oh sorry..
> Any chance you are savvy enough with git to try the wireless-dev kernel?
>
> git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-dev.git
>
> Can you replicate the problem using those sources? If so, you may
> want to attach your .config in your reply (just in case the exact
> config makes a difference).
Yes I can, except the "reproducibilty" reduces a bit. It's fairly easy
to reproduce though. The config will go on annex.
I've found out one interesting thing: if I modprobe -r the iwl3945
module while wpa_supplicant is running it doesn't trigger a hang like
on bcm (original message). On the contrary, it prevents a hang if then
I modprobe iwl3945 again and kill wpa_supplicant.
One time I managed to get the kernel to spit out something, but it was
on the gentoo kernel. I hope this is relevant, there was no hang when
this was spit out:
------------[ cut here ]------------
kernel BUG at kernel/workqueue.c:258!
invalid opcode: 0000 [1] SMP
CPU 1
Modules linked in:<7>wlan0: Trigger new scan to find an IBSS to join
iwl3945 mac80211<3>iwl3945: U iwl_scan_initiate Starting scan...
cfg80211 rfcomm l2cap snd_pcm_oss snd_mixer_oss snd_seq_oss
snd_seq_midi_event snd_seq snd_seq_device acpi_cpufreq asus_laptop
nvidia(P) i2c_core snd_hda_intel snd_pcm snd_timer snd snd_page_alloc
yenta_socket rsrc_nonstatic pcmcia_core sdhci mmc_core hci_usb
bluetooth tpm_infineon gspca
Pid: 2660, comm: iwl3945 Tainted: P 2.6.22-gentoo #1
RIP: 0010:[<ffffffff8023df87>] [<ffffffff8023df87>] run_workqueue+0x73/0x10b
RSP: 0018:ffff8100747fded0 EFLAGS: 00010207
RAX: 0000000000000000 RBX: ffff810074fb1d40 RCX: ffff8100748f19d0
RDX: ffff8100748f19d0 RSI: ffff8100747fdef0 RDI: ffff8100748f19c8
RBP: ffffffff880bf3a2 R08: ffff8100747fc000 R09: ffff8100740679d8
R10: 0000000000000000 R11: ffffffff8043d14e R12: ffff81007407bbd0
R13: ffffffffffffffff R14: ffffffff806445a0 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff81007ff00f40(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 000000000060e788 CR3: 0000000074679000 CR4: 00000000000006e0
Process iwl3945 (pid: 2660, threadinfo ffff8100747fc000, task ffff81007f4daf60)
Stack: ffff810074fb1d40 ffff810074fb1d40 ffffffff8023e7ff ffffffff8023e8d9
0000000000000000 ffff81007f4daf60 ffffffff802415f0 ffff8100747fdf08
ffff8100747fdf08 0000000000000000 ffff810074fb1d40 ffffffff802414de
Call Trace:
[<ffffffff8023e7ff>] worker_thread+0x0/0xe4
[<ffffffff8023e8d9>] worker_thread+0xda/0xe4
[<ffffffff802415f0>] autoremove_wake_function+0x0/0x2e
[<ffffffff802414de>] kthread+0x47/0x75
[<ffffffff8020a3b8>] child_rip+0xa/0x12
[<ffffffff80241497>] kthread+0x0/0x75
[<ffffffff8020a3ae>] child_rip+0x0/0x12
Code: 0f 0b eb fe f0 0f ba 71 f8 00 ff d5 65 48 8b 04 25 10 00 00
RIP [<ffffffff8023df87>] run_workqueue+0x73/0x10b
RSP <ffff8100747fded0>
> Thanks,
>
> John
> --
> John W. Linville
> linville@tuxdriver.com
>
Thank you!
Renato Caldas
[-- Attachment #2: .config --]
[-- Type: application/octet-stream, Size: 41565 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.22
# Thu Jul 12 03:13:36 2007
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ZONE_DMA32=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_DMI=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_CPUSETS is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_HT=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_NR_CPUS=4
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
CONFIG_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_START=0x200000
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_ALL is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
# CONFIG_SOFTWARE_SUSPEND is not set
CONFIG_SUSPEND_SMP=y
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPUFreq processor drivers
#
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_ACPI_CPUFREQ=m
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_HT_IRQ=y
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=m
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_FIFO=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
CONFIG_NET_SCH_TEQL=y
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_INGRESS is not set
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
# CONFIG_NET_CLS_TCINDEX is not set
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_ROUTE=y
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=y
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
# CONFIG_NET_CLS_POLICE is not set
CONFIG_NET_ESTIMATOR=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
# CONFIG_BT_RFCOMM_TTY is not set
# CONFIG_BT_BNEP is not set
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUG is not set
# CONFIG_IEEE80211 is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_UB=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
CONFIG_ASUS_LAPTOP=m
# CONFIG_MSI_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_BLINK is not set
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=y
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
#
# Controllers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=y
#
# Protocols
#
# CONFIG_IEEE1394_VIDEO1394 is not set
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
CONFIG_IEEE1394_RAWIO=y
#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
CONFIG_R8169_NAPI=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
# CONFIG_PPP_ASYNC is not set
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=800
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
CONFIG_TCG_TPM=y
# CONFIG_TCG_TIS is not set
# CONFIG_TCG_NSC is not set
# CONFIG_TCG_ATMEL is not set
CONFIG_TCG_INFINEON=m
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
# CONFIG_I2C_ALGOBIT is not set
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_USB_W9968CF is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_ZR364XX is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_USB_DSBR is not set
# CONFIG_DVB_CORE is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_PROGEAR is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=m
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
#
# LED devices
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_EDAC is not set
#
# Real Time Clock
#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
#
# DMA Engine support
#
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=y
#
# Virtualization
#
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
# CONFIG_KVM_AMD is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=y
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_NULL=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_BLOWFISH=y
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: d80211 deadlock with wpa_supplicant and rmmod
[not found] ` <20070711234153.GB5099-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
@ 2007-07-12 10:02 ` Johannes Berg
2007-07-13 12:05 ` seventh guardian
0 siblings, 1 reply; 8+ messages in thread
From: Johannes Berg @ 2007-07-12 10:02 UTC (permalink / raw)
To: John W. Linville
Cc: seventh guardian, netdev-u79uwXL29TY76Z2rM5mHXA,
linux-wireless-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: Type: text/plain, Size: 698 bytes --]
On Wed, 2007-07-11 at 19:41 -0400, John W. Linville wrote:
> > >I believe we have a deadlock in d80211.
> >
> > I have it too. But I'm using iwl3945 driver, in-kernel mac80211, and a
> > gentoo kernel (basically a patched vanilla-2.6.22.1). My machine is a
> > x86_64 core 2 duo.
> >
> > >The following triggers it on my 2way SMT machine with preempt.
> > >
> > >modprobe bcm43xx-d80211
> > >add sta0
> > >ifconfig sta0 up
> > >start wpa_supplicant on the interface
> > >rmmod bcm43xx-d80211
Sounds like the bug with the scheduled work locking. See the
"mac80211/bcm43xx deadlock" thread, there's a patch, report back if you
can/can not reproduce with the patch.
johannes
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 190 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: d80211 deadlock with wpa_supplicant and rmmod
2007-07-12 10:02 ` Johannes Berg
@ 2007-07-13 12:05 ` seventh guardian
[not found] ` <1caff7430707130505r579ef08cmacc6c77f7535a66c-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 8+ messages in thread
From: seventh guardian @ 2007-07-13 12:05 UTC (permalink / raw)
To: netdev, linux-wireless
On 7/12/07, Johannes Berg <johannes@sipsolutions.net> wrote:
> On Wed, 2007-07-11 at 19:41 -0400, John W. Linville wrote:
>
> > > >I believe we have a deadlock in d80211.
> > >
> > > I have it too. But I'm using iwl3945 driver, in-kernel mac80211, and a
> > > gentoo kernel (basically a patched vanilla-2.6.22.1). My machine is a
> > > x86_64 core 2 duo.
> > >
> > > >The following triggers it on my 2way SMT machine with preempt.
> > > >
> > > >modprobe bcm43xx-d80211
> > > >add sta0
> > > >ifconfig sta0 up
> > > >start wpa_supplicant on the interface
> > > >rmmod bcm43xx-d80211
>
> Sounds like the bug with the scheduled work locking. See the
> "mac80211/bcm43xx deadlock" thread, there's a patch, report back if you
> can/can not reproduce with the patch.
Hello, sorry for the delay but I only managed to try it out today..
I've applied the patch and tortured the system as far as I could, and
no hang at all :)
I've read the thread and it apparently replaces one bad problem for a
lesser one, so I understand if it's not applied.. But at least there
is a place in the code to point as the culprit :)
Thanks,
Renato Caldas
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: d80211 deadlock with wpa_supplicant and rmmod
[not found] ` <1caff7430707130505r579ef08cmacc6c77f7535a66c-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2007-07-13 21:45 ` Johannes Berg
[not found] ` <1184363116.3928.4.camel-YfaajirXv214zXjbi5bjpg@public.gmane.org>
0 siblings, 1 reply; 8+ messages in thread
From: Johannes Berg @ 2007-07-13 21:45 UTC (permalink / raw)
To: seventh guardian
Cc: netdev-u79uwXL29TY76Z2rM5mHXA,
linux-wireless-u79uwXL29TY76Z2rM5mHXA, John W. Linville
[-- Attachment #1: Type: text/plain, Size: 697 bytes --]
On Fri, 2007-07-13 at 13:05 +0100, seventh guardian wrote:
> Hello, sorry for the delay but I only managed to try it out today..
> I've applied the patch and tortured the system as far as I could, and
> no hang at all :)
>
> I've read the thread and it apparently replaces one bad problem for a
> lesser one, so I understand if it's not applied.. But at least there
> is a place in the code to point as the culprit :)
It definitely should be applied anyway :) I guess John just hasn't
caught up with all threads yet.
John: This is about the patch in the "mac80211/bcm43xx deadlock" thread
from Michael, it kills some rtnl_lock()/unlock() that causes this
deadlock.
johannes
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 190 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: d80211 deadlock with wpa_supplicant and rmmod
[not found] ` <1184363116.3928.4.camel-YfaajirXv214zXjbi5bjpg@public.gmane.org>
@ 2007-07-14 13:24 ` Jiri Benc
0 siblings, 0 replies; 8+ messages in thread
From: Jiri Benc @ 2007-07-14 13:24 UTC (permalink / raw)
To: Johannes Berg
Cc: seventh guardian, netdev-u79uwXL29TY76Z2rM5mHXA,
linux-wireless-u79uwXL29TY76Z2rM5mHXA, John W. Linville
On Fri, 13 Jul 2007 23:45:16 +0200, Johannes Berg wrote:
> On Fri, 2007-07-13 at 13:05 +0100, seventh guardian wrote:
>
> > Hello, sorry for the delay but I only managed to try it out today..
> > I've applied the patch and tortured the system as far as I could, and
> > no hang at all :)
> >
> > I've read the thread and it apparently replaces one bad problem for a
> > lesser one, so I understand if it's not applied.. But at least there
> > is a place in the code to point as the culprit :)
>
> It definitely should be applied anyway :) I guess John just hasn't
> caught up with all threads yet.
That's my fault, I missed that patch. If everybody put [PATCH] to subject
of mails containing a patch... (sigh)
> John: This is about the patch in the "mac80211/bcm43xx deadlock" thread
> from Michael, it kills some rtnl_lock()/unlock() that causes this
> deadlock.
Yes, please apply (the patch is below). Of course, we'll need a proper fix
but until it is ready this should be applied to prevent deadlocks.
Thanks,
Jiri
---
Subject: [PATCH] mac80211: remove rtnl locking in ieee80211_sta.c
From: Michael Wu <flamingice-R9e9/4HEdknk1uMJSBkQmQ@public.gmane.org>
The rtnl is held in ieee80211_sta.c to prevent some potential races with
userspace. Unfortunately, it also has the potential for deadlocks on
interface down. This patch removes the rtnl locking to eliminate the
deadlocks.
Signed-off-by: Michael Wu <flamingice-R9e9/4HEdknk1uMJSBkQmQ@public.gmane.org>
---
net/mac80211/ieee80211_sta.c | 6 ------
1 files changed, 0 insertions(+), 6 deletions(-)
diff --git a/net/mac80211/ieee80211_sta.c b/net/mac80211/ieee80211_sta.c
index 91b545c..4862797 100644
--- a/net/mac80211/ieee80211_sta.c
+++ b/net/mac80211/ieee80211_sta.c
@@ -25,7 +25,6 @@
#include <linux/wireless.h>
#include <linux/random.h>
#include <linux/etherdevice.h>
-#include <linux/rtnetlink.h>
#include <net/iw_handler.h>
#include <asm/types.h>
@@ -2073,12 +2072,9 @@ static int ieee80211_sta_config_auth(struct net_device *dev,
struct ieee80211_sta_bss *bss, *selected = NULL;
int top_rssi = 0, freq;
- rtnl_lock();
-
if (!ifsta->auto_channel_sel && !ifsta->auto_bssid_sel &&
!ifsta->auto_ssid_sel) {
ifsta->state = IEEE80211_AUTHENTICATE;
- rtnl_unlock();
ieee80211_sta_reset_auth(dev, ifsta);
return 0;
}
@@ -2121,7 +2117,6 @@ static int ieee80211_sta_config_auth(struct net_device *dev,
ieee80211_sta_set_bssid(dev, selected->bssid);
ieee80211_rx_bss_put(dev, selected);
ifsta->state = IEEE80211_AUTHENTICATE;
- rtnl_unlock();
ieee80211_sta_reset_auth(dev, ifsta);
return 0;
} else {
@@ -2132,7 +2127,6 @@ static int ieee80211_sta_config_auth(struct net_device *dev,
} else
ifsta->state = IEEE80211_DISABLED;
}
- rtnl_unlock();
return -1;
}
--
Jiri Benc
SUSE Labs
^ permalink raw reply related [flat|nested] 8+ messages in thread
end of thread, other threads:[~2007-07-14 13:24 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-12-31 21:18 d80211 deadlock with wpa_supplicant and rmmod Michael Buesch
-- strict thread matches above, loose matches on Subject: below --
2007-07-11 23:17 seventh guardian
[not found] ` <1caff7430707111617o70a534a5x2cf6b611a91f301a-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2007-07-11 23:41 ` John W. Linville
2007-07-12 2:20 ` seventh guardian
[not found] ` <20070711234153.GB5099-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
2007-07-12 10:02 ` Johannes Berg
2007-07-13 12:05 ` seventh guardian
[not found] ` <1caff7430707130505r579ef08cmacc6c77f7535a66c-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2007-07-13 21:45 ` Johannes Berg
[not found] ` <1184363116.3928.4.camel-YfaajirXv214zXjbi5bjpg@public.gmane.org>
2007-07-14 13:24 ` Jiri Benc
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).