From: dlezcano@fr.ibm.com
To: containers@lists.osdl.org
Cc: netdev@vger.kernel.org
Subject: [patch 08/12] net namespace : find namespace by addr
Date: Fri, 19 Jan 2007 16:47:22 +0100 [thread overview]
Message-ID: <20070119155359.348919940@localhost.localdomain> (raw)
In-Reply-To: 20070119154714.439706567@localhost.localdomain
[-- Attachment #1: net-namespace-l3-switch-to-net_ns-from-dst-addr.patch --]
[-- Type: text/plain, Size: 3573 bytes --]
From: Daniel Lezcano <dlezcano@fr.ibm.com>
Switch to the the l3 namespace using the destination address.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
---
include/linux/net_namespace.h | 7 +++++++
net/core/net_namespace.c | 35 +++++++++++++++++++++++++++++++++++
net/ipv4/ip_input.c | 16 +++++++++++++++-
3 files changed, 57 insertions(+), 1 deletion(-)
Index: 2.6.20-rc4-mm1/net/ipv4/ip_input.c
===================================================================
--- 2.6.20-rc4-mm1.orig/net/ipv4/ip_input.c
+++ 2.6.20-rc4-mm1/net/ipv4/ip_input.c
@@ -374,6 +374,9 @@
{
struct iphdr *iph;
u32 len;
+ int err;
+ struct net_namespace *net_ns = current_net_ns;
+ struct net_namespace *dst_net_ns = NULL;
/* When the interface is in promisc. mode, drop all the crap
* that it receives, do not try to analyse it.
@@ -393,6 +396,9 @@
iph = skb->nh.iph;
+ dst_net_ns = net_ns_find_from_dest_addr(iph->daddr);
+ if (dst_net_ns && !net_ns_match(net_ns, dst_net_ns))
+ push_net_ns(dst_net_ns);
/*
* RFC1122: 3.1.2.2 MUST silently discard any IP frame that fails the checksum.
*
@@ -431,10 +437,18 @@
/* Remove any debris in the socket control block */
memset(IPCB(skb), 0, sizeof(struct inet_skb_parm));
- return NF_HOOK(PF_INET, NF_IP_PRE_ROUTING, skb, dev, NULL,
+ err = NF_HOOK(PF_INET, NF_IP_PRE_ROUTING, skb, dev, NULL,
ip_rcv_finish);
+ if (dst_net_ns && !net_ns_match(net_ns, dst_net_ns))
+ pop_net_ns(net_ns);
+
+ return err;
+
inhdr_error:
+ if (dst_net_ns && !net_ns_match(net_ns, dst_net_ns))
+ pop_net_ns(net_ns);
+
IP_INC_STATS_BH(IPSTATS_MIB_INHDRERRORS);
drop:
kfree_skb(skb);
Index: 2.6.20-rc4-mm1/include/linux/net_namespace.h
===================================================================
--- 2.6.20-rc4-mm1.orig/include/linux/net_namespace.h
+++ 2.6.20-rc4-mm1/include/linux/net_namespace.h
@@ -99,6 +99,8 @@
extern __be32 net_ns_select_source_address(const struct net_device *dev,
u32 dst, int scope);
+extern struct net_namespace *net_ns_find_from_dest_addr(u32 daddr);
+
#define SELECT_SRC_ADDR net_ns_select_source_address
#else /* CONFIG_NET_NS */
@@ -167,6 +169,11 @@
return 0;
}
+static inline struct net_namespace *net_ns_find_from_dest_addr(u32 daddr)
+{
+ return NULL;
+}
+
#define SELECT_SRC_ADDR inet_select_addr
#endif /* !CONFIG_NET_NS */
Index: 2.6.20-rc4-mm1/net/core/net_namespace.c
===================================================================
--- 2.6.20-rc4-mm1.orig/net/core/net_namespace.c
+++ 2.6.20-rc4-mm1/net/core/net_namespace.c
@@ -385,4 +385,39 @@
out:
return addr;
}
+
+/*
+ * This function finds the network namespace destination deduced from
+ * the destination address. The network namespace is retrieved from
+ * the ifaddr owned by a network namespace
+ * @daddr : destination
+ * Returns : the network namespace destination or NULL if not found
+ */
+struct net_namespace *net_ns_find_from_dest_addr(u32 daddr)
+{
+ struct net_namespace *net_ns = NULL;
+ struct net_device *dev;
+ struct in_device *in_dev;
+
+ if (LOOPBACK(daddr))
+ return current_net_ns;
+
+ read_lock(&dev_base_lock);
+ rcu_read_lock();
+ for (dev = dev_base; dev; dev = dev->next) {
+ if ((in_dev = __in_dev_get_rcu(dev)) == NULL)
+ continue;
+ for_ifa(in_dev) {
+ if (ifa->ifa_local == daddr) {
+ net_ns = ifa->ifa_net_ns;
+ goto out_unlock_both;
+ }
+ } endfor_ifa(in_dev);
+ }
+out_unlock_both:
+ read_unlock(&dev_base_lock);
+ rcu_read_unlock();
+
+ return net_ns;
+}
#endif /* CONFIG_NET_NS */
--
next prev parent reply other threads:[~2007-01-19 16:40 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-19 15:47 [patch 00/12] net namespace : L3 namespace - introduction dlezcano
2007-01-19 15:47 ` [patch 01/12] net namespace : initialize init process to level 2 dlezcano
2007-01-19 15:47 ` [patch 02/12] net namespace : store L2 parent namespace dlezcano
2007-01-19 15:47 ` [patch 03/12] net namespace : share network ressources L2 with L3 dlezcano
2007-01-19 15:47 ` [patch 04/12] net namespace : isolate the inet device dlezcano
2007-01-19 15:47 ` [patch 05/12] net namespace : ioctl to push ifa to net namespace l3 dlezcano
2007-01-20 4:52 ` Herbert Poetzl
2007-01-20 11:48 ` Daniel Lezcano
2007-01-19 15:47 ` [patch 06/12] net namespace : check bind address dlezcano
2007-01-19 15:47 ` [patch 07/12] net namespace: set source addresse dlezcano
2007-01-19 15:47 ` dlezcano [this message]
2007-01-20 4:56 ` [patch 08/12] net namespace : find namespace by addr Herbert Poetzl
2007-01-19 15:47 ` [patch 09/12] net namespace : make loopback address always visible dlezcano
2007-01-19 15:47 ` [patch 10/12] net namespace : add the loopback isolation dlezcano
2007-01-19 15:47 ` [patch 11/12] net namespace : debugfs - add net_ns debugfs dlezcano
2007-01-19 15:47 ` [patch 12/12] net namespace : Add broadcasting dlezcano
2007-01-20 4:58 ` Herbert Poetzl
2007-01-20 11:54 ` Daniel Lezcano
2007-01-20 4:48 ` [patch 00/12] net namespace : L3 namespace - introduction Herbert Poetzl
2007-01-20 11:42 ` Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070119155359.348919940@localhost.localdomain \
--to=dlezcano@fr.ibm.com \
--cc=containers@lists.osdl.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).