From: Deepak Saxena <dsaxena@plexity.net>
To: netdev@vger.kernel.org, linville@tuxdriver.com
Subject: Hermes PCI broken on 2.6.20?
Date: Thu, 8 Feb 2007 17:28:19 -0800 [thread overview]
Message-ID: <20070209012819.GA23490@plexity.net> (raw)
Running both 2.6.20 and 2.6.18, the hermes PCI driver (CONFIG_HERMES_PCI)
gives the following errors. Card is a revision 1 chipset (Dev ID 3873).
Note that when iwconfig is run a few times in a row, the error messages
go away but they might just be getting ratelimited. Anyone else seen
this?
root@10.40.20.173:~# iwconfig
eth0 no wirhermes @ c8810000: Card removed while waiting for command
0x0021 completion.
eless extensionshermes @ c8810000: Card removed while issuing command
0x0021.
.
lo nhermes @ c8810000: Card removed while issuing command 0x0021.
o wireless extenhermes @ c8810000: Card removed while issuing command
0x0021.
sions.
eth1 hermes @ c8810000: Card removed while issuing command 0x0021.
no wireless hermes @ c8810000: Card removed while issuing command
0x0011.
hermes @ c8810000: Card removed while issuing command 0x0021.
extensions.
hermes @ c8810000: Card removed while issuing command 0x0021.
hermes @ c8810000: Card removed while issuing command 0x0021.
eth2 IEEE 802.11-DS ESSID:"" Nickname:"Prism I"
Mode:Managed Bit Rate:11 Mb/s
RTS thr:off
Encryption key:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 invalid crypt:0 invalid misc:0
tunl0 no wireless extensions.
sit0 no wireless extensions.
ip6tnl0 no wireless extensions.
root@10.40.20.173:~# iwconfig eth2 essid qafarm-ap
hermes @ c8810000: Card removed while issuing command 0x0011.
hermes @ c8810000: Card removed while issuing command 0x0021.
root@10.40.20.173:~# iwconfig eth2 essid qafarm-ap
printk: 3 messages suppressed.
hermes @ c8810000: Card removed while issuing command 0x0011.
root@10.40.20.173:~# iwconfig eth2 essid qafarm-ap
root@10.40.20.173:~# ifconfig eth2 10.40.20.200 netmask 255.255.252.0 up
hermes @ c8810000: BAP0 offset timeout: reg=0x8000 id=0xfc01 offset=0x0
eth2: Error -110 setting MAC address
eth2: Error -110 configuring card
SIOCSIFFLAGS: Coeth2: Error -110 setting MAC address
eth2: Error -110 configuring card
nnection timed out
SIOCSIFFLAGS: Connection timed out
--
Deepak Saxena - dsaxena@plexity.net - http://www.plexity.net
The terrorist and the policeman both come from the same basket.
-- Joseph Conrad, The Secret Agent
next reply other threads:[~2007-02-09 1:38 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-02-09 1:28 Deepak Saxena [this message]
2007-02-09 5:29 ` Hermes PCI broken on 2.6.20? Pavel Roskin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070209012819.GA23490@plexity.net \
--to=dsaxena@plexity.net \
--cc=linville@tuxdriver.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).