netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stephen Hemminger <shemminger@linux-foundation.org>
To: David Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org, bridge@linux-foundation.org,
	Srinivas Aji <Aji_Srinivas@emc.com>
Subject: [PATCH 3/4] bridge: make path cost setting persistent
Date: Wed, 21 Feb 2007 14:41:10 -0800	[thread overview]
Message-ID: <20070221224255.790379091@linux-foundation.org> (raw)
In-Reply-To: 20070221224107.741532037@linux-foundation.org

[-- Attachment #1: bridge-admin-path-cost.patch --]
[-- Type: text/plain, Size: 3845 bytes --]

This is to keep an STP port path cost which was set by a user from
replaced by the link-speed based path cost whenever the link goes down
and comes back up. 
An admin_cost field is added to struct net_bridge_port to
indicate whether there is a user specified path cost.

Signed-Off-By: Srinivas Aji <Aji_Srinivas@emc.com>
Signed-off-by: StephenHemminger <shemminger@linux-foundtion.org>

---
 net/bridge/br_if.c       |    8 ++++----
 net/bridge/br_private.h  |    2 ++
 net/bridge/br_stp.c      |    1 -
 net/bridge/br_stp_if.c   |   13 ++++++++++---
 net/bridge/br_sysfs_if.c |   10 +++++++---
 5 files changed, 23 insertions(+), 11 deletions(-)

--- bridge.orig/net/bridge/br_if.c	2007-02-21 14:28:51.000000000 -0800
+++ bridge/net/bridge/br_if.c	2007-02-21 14:29:25.000000000 -0800
@@ -33,7 +33,7 @@
  * ethtool, use ethtool_ops.  Also, since driver might sleep need to
  * not be holding any locks.
  */
-static int port_cost(struct net_device *dev)
+int br_port_cost(struct net_device *dev)
 {
 	struct ethtool_cmd ecmd = { ETHTOOL_GSET };
 	struct ifreq ifr;
@@ -82,8 +82,8 @@
 	struct net_device *dev = p->dev;
 	struct net_bridge *br = p->br;
 
-	if (netif_carrier_ok(dev))
-		p->path_cost = port_cost(dev);
+	if (netif_carrier_ok(dev) && p->admin_cost == 0)
+		p->path_cost = br_port_cost(dev);
 
 	if (netif_running(br->dev)) {
 		spin_lock_bh(&br->lock);
@@ -260,7 +260,7 @@
 	p->br = br;
 	dev_hold(dev);
 	p->dev = dev;
-	p->path_cost = port_cost(dev);
+	p->path_cost = br_port_cost(dev);
 	p->priority = 0x8000 >> BR_PORT_BITS;
 	p->port_no = index;
 	br_init_port(p);
--- bridge.orig/net/bridge/br_private.h	2007-02-21 14:29:09.000000000 -0800
+++ bridge/net/bridge/br_private.h	2007-02-21 14:29:25.000000000 -0800
@@ -73,6 +73,7 @@
 	bridge_id			designated_root;
 	bridge_id			designated_bridge;
 	u32				path_cost;
+	u32				admin_cost;
 	u32				designated_cost;
 
 	struct timer_list		forward_delay_timer;
@@ -169,6 +170,7 @@
 		      int clone);
 
 /* br_if.c */
+extern int br_port_cost(struct net_device *dev);
 extern void br_port_carrier_check(struct net_bridge_port *p);
 extern int br_add_bridge(const char *name);
 extern int br_del_bridge(const char *name);
--- bridge.orig/net/bridge/br_stp.c	2007-02-21 14:28:51.000000000 -0800
+++ bridge/net/bridge/br_stp.c	2007-02-21 14:29:25.000000000 -0800
@@ -39,7 +39,6 @@
 
 }
 
-/* called under bridge lock */
 struct net_bridge_port *br_get_port(struct net_bridge *br, u16 port_no)
 {
 	struct net_bridge_port *p;
--- bridge.orig/net/bridge/br_stp_if.c	2007-02-21 14:28:51.000000000 -0800
+++ bridge/net/bridge/br_stp_if.c	2007-02-21 14:29:25.000000000 -0800
@@ -212,12 +212,19 @@
 	}
 }
 
-/* called under bridge lock */
-void br_stp_set_path_cost(struct net_bridge_port *p, u32 path_cost)
+void br_stp_set_path_cost(struct net_bridge_port *p, u32 cost)
 {
-	p->path_cost = path_cost;
+	struct net_bridge *br = p->br;
+
+	ASSERT_RTNL();
+
+	p->admin_cost = cost;
+	p->path_cost = cost ? : br_port_cost(p->dev);
+
+	spin_lock_bh(&br->lock);
 	br_configuration_update(p->br);
 	br_port_state_selection(p->br);
+	spin_unlock_bh(&br->lock);
 }
 
 ssize_t br_show_bridge_id(char *buf, const struct bridge_id *id)
--- bridge.orig/net/bridge/br_sysfs_if.c	2007-02-21 14:28:51.000000000 -0800
+++ bridge/net/bridge/br_sysfs_if.c	2007-02-21 14:29:25.000000000 -0800
@@ -184,9 +184,13 @@
 	if (endp != buf) {
 		rtnl_lock();
 		if (p->dev && p->br && brport_attr->store) {
-			spin_lock_bh(&p->br->lock);
-			ret = brport_attr->store(p, val);
-			spin_unlock_bh(&p->br->lock);
+			if (brport_attr->store == store_path_cost)
+				ret = store_path_cost(p, val);
+			else {
+				spin_lock_bh(&p->br->lock);
+				ret = brport_attr->store(p, val);
+				spin_unlock_bh(&p->br->lock);
+			}
 			if (ret == 0)
 				ret = count;
 		}

--
Stephen Hemminger <shemminger@linux-foundation.org>


  parent reply	other threads:[~2007-02-21 22:47 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-02-21 22:41 [PATCH 0/4] bridge patches Stephen Hemminger
2007-02-21 22:41 ` [PATCH 1/4] bridge: get rid of miscdevice include Stephen Hemminger
2007-02-21 23:40   ` Marc.Obbad
2007-02-22  9:09   ` David Miller
2007-02-21 22:41 ` [PATCH 2/4] bridge: eliminate workqueue for carrier check Stephen Hemminger
2007-02-22  9:10   ` David Miller
2007-02-21 22:41 ` Stephen Hemminger [this message]
2007-02-27 17:52   ` [PATCH 3+/4] bridge: fix locking of set path cost Stephen Hemminger
2007-02-27 17:56     ` David Miller
2007-02-21 22:41 ` [PATCH 4/4] bridge: add flush attribute Stephen Hemminger
2007-02-22  9:11 ` [PATCH 0/4] bridge patches David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070221224255.790379091@linux-foundation.org \
    --to=shemminger@linux-foundation.org \
    --cc=Aji_Srinivas@emc.com \
    --cc=bridge@linux-foundation.org \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).