From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephen Hemminger Subject: Re: "skge 0000:01:0a.0: unsupported phy type 0x0" Date: Mon, 5 Mar 2007 14:13:00 -0800 Message-ID: <20070305141300.11edbc4e@freekitty> References: Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: netdev@vger.kernel.org To: Chris Stromsoe Return-path: Received: from smtp.osdl.org ([65.172.181.24]:38595 "EHLO smtp.osdl.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750874AbXCEWNE (ORCPT ); Mon, 5 Mar 2007 17:13:04 -0500 In-Reply-To: Sender: netdev-owner@vger.kernel.org List-Id: netdev.vger.kernel.org On Mon, 5 Mar 2007 13:48:29 -0800 (PST) Chris Stromsoe wrote: > I have a bunch of dual-port SK 98xx cards that work with sk98lin but not > with skge. After loading skge, I get > > ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 > skge 0000:01:0a.0: unsupported phy type 0x0 > ACPI: PCI interrupt for device 0000:01:0a.0 disabled > skge: probe of 0000:01:0a.0 failed with error -95 > > > lspci -vv output for the card: > > 0000:01:0a.0 Ethernet controller: Syskonnect (Schneider & Koch) SK-98xx Gigabit Ethernet Server Adapter (rev 12) > Subsystem: Syskonnect (Schneider & Koch) SK-9844 Gigabit Ethernet Server Adapter (SK-NET GE-SX dual link) > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin A routed to IRQ 10 > Region 0: Memory at ff8fc000 (32-bit, non-prefetchable) [size=16K] > Region 1: I/O ports at d800 [size=256] > Expansion ROM at ff400000 [disabled] [size=128K] > Capabilities: [48] Power Management version 1 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=1 PME- > Capabilities: [50] Vital Product Data > What kernel version. Type 0 is XMAC support, and that was added to a fairly recent kernel (2.6.19?) -- Stephen Hemminger