netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stephen Hemminger <shemminger@linux-foundation.org>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: netdev@vger.kernel.org
Subject: [PATCH 2/7] skge: mask irqs when device down
Date: Fri, 16 Mar 2007 14:01:27 -0700	[thread overview]
Message-ID: <20070316210155.883374405@linux-foundation.org> (raw)
In-Reply-To: 20070316210125.324052637@linux-foundation.org

[-- Attachment #1: skge-noirq-down.patch --]
[-- Type: text/plain, Size: 2585 bytes --]

Wheen a port on the skge driver is not used, it should
mask off interrupts from theat port.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

---
 drivers/net/skge.c |   24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)

--- skge-dev.orig/drivers/net/skge.c
+++ skge-dev/drivers/net/skge.c
@@ -105,7 +105,8 @@ static const int txqaddr[] = { Q_XA1, Q_
 static const int rxqaddr[] = { Q_R1, Q_R2 };
 static const u32 rxirqmask[] = { IS_R1_F, IS_R2_F };
 static const u32 txirqmask[] = { IS_XA1_F, IS_XA2_F };
-static const u32 irqmask[] = { IS_R1_F|IS_XA1_F, IS_R2_F|IS_XA2_F };
+static const u32 napimask[] = { IS_R1_F|IS_XA1_F, IS_R2_F|IS_XA2_F };
+static const u32 portmask[] = { IS_PORT_1, IS_PORT_2 };
 
 static int skge_get_regs_len(struct net_device *dev)
 {
@@ -2504,6 +2505,11 @@ static int skge_up(struct net_device *de
 	skge_write8(hw, Q_ADDR(rxqaddr[port], Q_CSR), CSR_START | CSR_IRQ_CL_F);
 	skge_led(skge, LED_MODE_ON);
 
+	spin_lock_irq(&hw->hw_lock);
+	hw->intr_mask |= portmask[port];
+	skge_write32(hw, B0_IMSK, hw->intr_mask);
+	spin_unlock_irq(&hw->hw_lock);
+
 	netif_poll_enable(dev);
 	return 0;
 
@@ -2533,6 +2539,13 @@ static int skge_down(struct net_device *
 	if (hw->chip_id == CHIP_ID_GENESIS && hw->phy_type == SK_PHY_XMAC)
 		cancel_delayed_work(&skge->link_thread);
 
+	netif_poll_disable(dev);
+
+	spin_lock_irq(&hw->hw_lock);
+	hw->intr_mask &= ~portmask[port];
+	skge_write32(hw, B0_IMSK, hw->intr_mask);
+	spin_unlock_irq(&hw->hw_lock);
+
 	skge_write8(skge->hw, SK_REG(skge->port, LNK_LED_REG), LED_OFF);
 	if (hw->chip_id == CHIP_ID_GENESIS)
 		genesis_stop(skge);
@@ -2575,8 +2588,6 @@ static int skge_down(struct net_device *
 
 	skge_led(skge, LED_MODE_OFF);
 
-	netif_poll_disable(dev);
-
 	netif_tx_lock_bh(dev);
 	skge_tx_clean(dev);
 	netif_tx_unlock_bh(dev);
@@ -3051,7 +3062,7 @@ static int skge_poll(struct net_device *
 
 	spin_lock_irqsave(&hw->hw_lock, flags);
 	__netif_rx_complete(dev);
-	hw->intr_mask |= irqmask[skge->port];
+	hw->intr_mask |= napimask[skge->port];
   	skge_write32(hw, B0_IMSK, hw->intr_mask);
 	skge_read32(hw, B0_IMSK);
 	spin_unlock_irqrestore(&hw->hw_lock, flags);
@@ -3415,10 +3426,9 @@ static int skge_reset(struct skge_hw *hw
 	else
 		hw->ram_size = t8 * 4096;
 
-	hw->intr_mask = IS_HW_ERR | IS_PORT_1;
-	if (hw->ports > 1)
-		hw->intr_mask |= IS_PORT_2;
+	hw->intr_mask = IS_HW_ERR;
 
+	/* Use PHY IRQ for all but fiber based Genesis board */
 	if (!(hw->chip_id == CHIP_ID_GENESIS && hw->phy_type == SK_PHY_XMAC))
 		hw->intr_mask |= IS_EXT_REG;
 

-- 


  parent reply	other threads:[~2007-03-16 21:06 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-03-16 21:01 [PATCH 0/7] Skge driver update Stephen Hemminger
2007-03-16 21:01 ` [PATCH 1/7] skge: deadlock on tx timeout Stephen Hemminger
2007-03-23  5:48   ` Jeff Garzik
2007-03-16 21:01 ` Stephen Hemminger [this message]
2007-03-16 21:01 ` [PATCH 3/7] skge: use per-port phy locking Stephen Hemminger
2007-03-23  5:49   ` Jeff Garzik
2007-03-16 21:01 ` [PATCH 4/7] skge: ignore unused error interrupts Stephen Hemminger
2007-03-23  5:58   ` Jeff Garzik
2007-03-16 21:01 ` [PATCH 5/7] skge: transmit locking improvements Stephen Hemminger
2007-03-16 21:01 ` [PATCH 6/7] skge: rearrange fields Stephen Hemminger
2007-03-16 21:01 ` [PATCH 7/7] skge: version 1.11 Stephen Hemminger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070316210155.883374405@linux-foundation.org \
    --to=shemminger@linux-foundation.org \
    --cc=jgarzik@pobox.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).