From: olof@lixom.net (Olof Johansson)
To: jgarzik@pobox.com
Cc: netdev@vger.kernel.org
Subject: [PATCH v3] [2/10] pasemi_mac: Move the IRQ mapping from the PCI layer to the driver
Date: Sat, 28 Apr 2007 15:36:50 -0500 [thread overview]
Message-ID: <20070428203650.GC4331@lixom.net> (raw)
In-Reply-To: <20070428203624.GA4331@lixom.net>
Fixes for ethernet IRQ mapping, to be done in the driver instead of in
the platform setup code.
Signed-off-by: Olof Johansson <olof@lixom.net>
Index: netdev-2.6/arch/powerpc/platforms/pasemi/pci.c
===================================================================
--- netdev-2.6.orig/arch/powerpc/platforms/pasemi/pci.c
+++ netdev-2.6/arch/powerpc/platforms/pasemi/pci.c
@@ -163,19 +163,6 @@ static void __init pas_fixup_phb_resourc
}
-void __devinit pas_pci_irq_fixup(struct pci_dev *dev)
-{
- /* DMA is special, 84 interrupts (128 -> 211), all but 128
- * need to be mapped by hand here.
- */
- if (dev->vendor == 0x1959 && dev->device == 0xa007) {
- int i;
- for (i = 129; i < 212; i++)
- irq_create_mapping(NULL, i);
- }
-}
-
-
void __init pas_pci_init(void)
{
struct device_node *np, *root;
Index: netdev-2.6/arch/powerpc/platforms/pasemi/setup.c
===================================================================
--- netdev-2.6.orig/arch/powerpc/platforms/pasemi/setup.c
+++ netdev-2.6/arch/powerpc/platforms/pasemi/setup.c
@@ -240,5 +240,4 @@ define_machine(pas) {
.check_legacy_ioport = pas_check_legacy_ioport,
.progress = pas_progress,
.machine_check_exception = pas_machine_check_handler,
- .pci_irq_fixup = pas_pci_irq_fixup,
};
Index: netdev-2.6/drivers/net/pasemi_mac.c
===================================================================
--- netdev-2.6.orig/drivers/net/pasemi_mac.c
+++ netdev-2.6/drivers/net/pasemi_mac.c
@@ -33,6 +33,8 @@
#include <linux/tcp.h>
#include <net/checksum.h>
+#include <asm/irq.h>
+
#include "pasemi_mac.h"
@@ -531,6 +533,7 @@ static irqreturn_t pasemi_mac_tx_intr(in
static int pasemi_mac_open(struct net_device *dev)
{
struct pasemi_mac *mac = netdev_priv(dev);
+ int base_irq;
unsigned int flags;
int ret;
@@ -594,28 +597,37 @@ static int pasemi_mac_open(struct net_de
netif_start_queue(dev);
netif_poll_enable(dev);
- ret = request_irq(mac->dma_pdev->irq + mac->dma_txch,
- &pasemi_mac_tx_intr, IRQF_DISABLED,
+ /* Interrupts are a bit different for our DMA controller: While
+ * it's got one a regular PCI device header, the interrupt there
+ * is really the base of the range it's using. Each tx and rx
+ * channel has it's own interrupt source.
+ */
+
+ base_irq = virq_to_hw(mac->dma_pdev->irq);
+
+ mac->tx_irq = irq_create_mapping(NULL, base_irq + mac->dma_txch);
+ mac->rx_irq = irq_create_mapping(NULL, base_irq + 20 + mac->dma_txch);
+
+ ret = request_irq(mac->tx_irq, &pasemi_mac_tx_intr, IRQF_DISABLED,
mac->tx->irq_name, dev);
if (ret) {
dev_err(&mac->pdev->dev, "request_irq of irq %d failed: %d\n",
- mac->dma_pdev->irq + mac->dma_txch, ret);
+ base_irq + mac->dma_txch, ret);
goto out_tx_int;
}
- ret = request_irq(mac->dma_pdev->irq + 20 + mac->dma_rxch,
- &pasemi_mac_rx_intr, IRQF_DISABLED,
+ ret = request_irq(mac->rx_irq, &pasemi_mac_rx_intr, IRQF_DISABLED,
mac->rx->irq_name, dev);
if (ret) {
dev_err(&mac->pdev->dev, "request_irq of irq %d failed: %d\n",
- mac->dma_pdev->irq + 20 + mac->dma_rxch, ret);
+ base_irq + 20 + mac->dma_rxch, ret);
goto out_rx_int;
}
return 0;
out_rx_int:
- free_irq(mac->dma_pdev->irq + mac->dma_txch, dev);
+ free_irq(mac->tx_irq, dev);
out_tx_int:
netif_poll_disable(dev);
netif_stop_queue(dev);
@@ -699,8 +711,8 @@ static int pasemi_mac_close(struct net_d
pci_write_config_dword(mac->dma_pdev,
PAS_DMA_RXINT_RCMDSTA(mac->dma_if), 0);
- free_irq(mac->dma_pdev->irq + mac->dma_txch, dev);
- free_irq(mac->dma_pdev->irq + 20 + mac->dma_rxch, dev);
+ free_irq(mac->tx_irq, dev);
+ free_irq(mac->rx_irq, dev);
/* Free resources */
pasemi_mac_free_rx_resources(dev);
Index: netdev-2.6/drivers/net/pasemi_mac.h
===================================================================
--- netdev-2.6.orig/drivers/net/pasemi_mac.h
+++ netdev-2.6/drivers/net/pasemi_mac.h
@@ -73,6 +73,8 @@ struct pasemi_mac {
struct pasemi_mac_txring *tx;
struct pasemi_mac_rxring *rx;
+ unsigned long tx_irq;
+ unsigned long rx_irq;
};
/* Software status descriptor (desc_info) */
next prev parent reply other threads:[~2007-04-28 20:36 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-28 20:36 [PATCH v3] [0/10] pasemi_mac: fixes and enhancements Olof Johansson
2007-04-28 20:36 ` [PATCH v3] [1/10] pasemi_mac: A couple of minor bugfixes Olof Johansson
2007-05-08 5:02 ` Jeff Garzik
2007-04-28 20:36 ` Olof Johansson [this message]
2007-04-28 20:57 ` [PATCH v3] [2/10] [REAL 2/10] pasemi_mac: Move the IRQ mapping from the PCI layer to the driver Olof Johansson
2007-05-08 5:02 ` Jeff Garzik
2007-05-08 5:32 ` Olof Johansson
2007-04-28 20:37 ` [PATCH v3] [3/10] pasemi_mac: Abstract and fix up interrupt restart routines Olof Johansson
2007-04-28 20:37 ` [PATCH v3] [4/10] pasemi_mac: Timer and interrupt fixes Olof Johansson
2007-04-28 20:37 ` [PATCH v3] [5/10] pasemi_mac: Add SKB reuse / copy-break Olof Johansson
2007-04-28 20:37 ` [PATCH v3] [6/10] pasemi_mac: Minor cleanup / define fixes Olof Johansson
2007-04-28 20:37 ` [PATCH v3] [2/10] pasemi_mac: Move the IRQ mapping from the PCI layer to the driver[PATCH v3] [7/10] pasemi_mac: Logic cleanup / rx performance improvements Olof Johansson
2007-04-28 20:38 ` [PATCH v3] [8/10] pasemi_mac: Add msglevel support and "pasemi_mac_debug" module param Olof Johansson
2007-05-08 5:03 ` Jeff Garzik
2007-05-08 5:33 ` Olof Johansson
2007-04-28 20:38 ` [PATCH v3] [9/10] pasemi_mac: PHY support Olof Johansson
2007-05-08 5:03 ` Jeff Garzik
2007-04-28 20:38 ` [PATCH v3] [10/10] pasemi_mac: Use local-mac-address instead of mac-address if available Olof Johansson
2007-04-28 20:58 ` [PATCH v3] [7/10] pasemi_mac: Logic cleanup / rx performance improvements Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070428203650.GC4331@lixom.net \
--to=olof@lixom.net \
--cc=jgarzik@pobox.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).