* Re: D-Link DFE-580TX 4 port NIC problems [not found] <20070509120142.2305a1d1@snibbles.dedenet.de> @ 2007-05-09 10:27 ` Andrew Morton 2007-07-27 9:30 ` Mario Doering 0 siblings, 1 reply; 5+ messages in thread From: Andrew Morton @ 2007-05-09 10:27 UTC (permalink / raw) To: Mario Doering; +Cc: linux-kernel, netdev On Wed, 9 May 2007 12:01:42 +0200 Mario Doering <mario@dedenet.de> wrote: > Hello, > > we have a D-Link DFE-580TX 4 port network card in our main router. > > It works pretty well most of the time, even though an error > message pops up in dmesg every now and then (sometimes once a day > sometimes once every few hours). > > > But every few weeks those error messages increase rapidly, spamming > dmesg. When this happens the system does not react anymore and pushing > the reset button is the only option left. > > I googled around and found out that other users have same problem, > but no solution to this. > > > Part of the message log is located here: > http://test.dedenet.de/messages.gz > or > http://test.dedenet.de/messages.txt > > > uname -a > Linux router1 2.6.19-gentoo-r5 #1 Sat Feb 17 17:04:03 CET 2007 i686 AMD > Athlon(tm) XP AuthenticAMD GNU/Linux > > > driver: > [ 17.364707] sundance.c:v1.2 11-Sep-2006 Written by Donald Becker > [ 17.364711] http://www.scyld.com/network/sundance.html > [ 17.364844] ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 17 (level, > low) -> IRQ 17 [ 17.365396] eth1: D-Link DFE-580TX 4 port Server > Adapter at 0001bc00, 00:0d:88:cc:a5:f0, IRQ 17. [ 17.366350] eth1: > MII PHY found at address 1, status 0x7829 advertising 01e1. > [ 17.676491] ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 18 (level, > low) -> IRQ 18 [ 17.676912] eth2: D-Link DFE-580TX 4 port Server > Adapter at 0001b800, 00:0d:88:cc:a5:f1, IRQ 18. [ 17.677864] eth2: > MII PHY found at address 1, status 0x7809 advertising 01e1. > [ 17.987730] ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 19 (level, > low) -> IRQ 16 [ 17.988107] eth3: D-Link DFE-580TX 4 port Server > Adapter at 0001b400, 00:0d:88:cc:a5:f2, IRQ 16. [ 17.989059] eth3: > MII PHY found at address 1, status 0x7829 advertising 01e1. > [ 18.298910] ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 16 (level, > low) -> IRQ 19 [ 18.299320] eth4: D-Link DFE-580TX 4 port Server > Adapter at 0001b000, 00:0d:88:cc:a5:f3, IRQ 19. [ 18.300272] eth4: > MII PHY found at address 1, status 0x7809 advertising 01e1. > > > > No such error message appears for about 7-10 days after a reboot. Maybe > there is some kind of buffer running full? > > Do you need any additional info? > > > Please CC me :-) (cc netdev) ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: D-Link DFE-580TX 4 port NIC problems 2007-05-09 10:27 ` D-Link DFE-580TX 4 port NIC problems Andrew Morton @ 2007-07-27 9:30 ` Mario Doering 2007-07-27 12:08 ` Clemens Koller 0 siblings, 1 reply; 5+ messages in thread From: Mario Doering @ 2007-07-27 9:30 UTC (permalink / raw) To: linux-kernel; +Cc: netdev Hello, are there any news or questions on this issue? Mario. On Wed, 9 May 2007 03:27:00 -0700 Andrew Morton <akpm@linux-foundation.org> wrote: > On Wed, 9 May 2007 12:01:42 +0200 Mario Doering <mario@dedenet.de> > wrote: > > > Hello, > > > > we have a D-Link DFE-580TX 4 port network card in our main router. > > > > It works pretty well most of the time, even though an error > > message pops up in dmesg every now and then (sometimes once a day > > sometimes once every few hours). > > > > > > But every few weeks those error messages increase rapidly, spamming > > dmesg. When this happens the system does not react anymore and > > pushing the reset button is the only option left. > > > > I googled around and found out that other users have same problem, > > but no solution to this. > > > > > > Part of the message log is located here: > > http://test.dedenet.de/messages.gz > > or > > http://test.dedenet.de/messages.txt > > > > > > uname -a > > Linux router1 2.6.19-gentoo-r5 #1 Sat Feb 17 17:04:03 CET 2007 i686 > > AMD Athlon(tm) XP AuthenticAMD GNU/Linux > > > > > > driver: > > [ 17.364707] sundance.c:v1.2 11-Sep-2006 Written by Donald Becker > > [ 17.364711] http://www.scyld.com/network/sundance.html > > [ 17.364844] ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 17 (level, > > low) -> IRQ 17 [ 17.365396] eth1: D-Link DFE-580TX 4 port Server > > Adapter at 0001bc00, 00:0d:88:cc:a5:f0, IRQ 17. [ 17.366350] eth1: > > MII PHY found at address 1, status 0x7829 advertising 01e1. > > [ 17.676491] ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 18 (level, > > low) -> IRQ 18 [ 17.676912] eth2: D-Link DFE-580TX 4 port Server > > Adapter at 0001b800, 00:0d:88:cc:a5:f1, IRQ 18. [ 17.677864] eth2: > > MII PHY found at address 1, status 0x7809 advertising 01e1. > > [ 17.987730] ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 19 (level, > > low) -> IRQ 16 [ 17.988107] eth3: D-Link DFE-580TX 4 port Server > > Adapter at 0001b400, 00:0d:88:cc:a5:f2, IRQ 16. [ 17.989059] eth3: > > MII PHY found at address 1, status 0x7829 advertising 01e1. > > [ 18.298910] ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 16 (level, > > low) -> IRQ 19 [ 18.299320] eth4: D-Link DFE-580TX 4 port Server > > Adapter at 0001b000, 00:0d:88:cc:a5:f3, IRQ 19. [ 18.300272] eth4: > > MII PHY found at address 1, status 0x7809 advertising 01e1. > > > > > > > > No such error message appears for about 7-10 days after a reboot. > > Maybe there is some kind of buffer running full? > > > > Do you need any additional info? > > > > > > Please CC me :-) > > (cc netdev) ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: D-Link DFE-580TX 4 port NIC problems 2007-07-27 9:30 ` Mario Doering @ 2007-07-27 12:08 ` Clemens Koller 2007-07-27 15:03 ` adi 2007-07-27 23:41 ` Mario Doering 0 siblings, 2 replies; 5+ messages in thread From: Clemens Koller @ 2007-07-27 12:08 UTC (permalink / raw) To: Mario Doering; +Cc: linux-kernel, netdev Hi, Mario! Mario Doering schrieb: > Hello, > > are there any news or questions on this issue? Can you try the latest kernel to see if the same problem persists? Is there any kernel version where it was working fine? > On Wed, 9 May 2007 03:27:00 -0700 > Andrew Morton <akpm@linux-foundation.org> wrote: > >> On Wed, 9 May 2007 12:01:42 +0200 Mario Doering <mario@dedenet.de> >> wrote: >> >>> Hello, >>> >>> we have a D-Link DFE-580TX 4 port network card in our main router. >>> >>> It works pretty well most of the time, even though an error >>> message pops up in dmesg every now and then (sometimes once a day >>> sometimes once every few hours). >>> >>> >>> But every few weeks those error messages increase rapidly, spamming >>> dmesg. When this happens the system does not react anymore and >>> pushing the reset button is the only option left. >>> >>> I googled around and found out that other users have same problem, >>> but no solution to this. >>> >>> >>> Part of the message log is located here: >>> http://test.dedenet.de/messages.gz >>> or >>> http://test.dedenet.de/messages.txt >>> >>> >>> uname -a >>> Linux router1 2.6.19-gentoo-r5 #1 Sat Feb 17 17:04:03 CET 2007 i686 >>> AMD Athlon(tm) XP AuthenticAMD GNU/Linux >>> >>> >>> driver: >>> [ 17.364707] sundance.c:v1.2 11-Sep-2006 Written by Donald Becker >>> [ 17.364711] http://www.scyld.com/network/sundance.html >>> [ 17.364844] ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 17 (level, >>> low) -> IRQ 17 [ 17.365396] eth1: D-Link DFE-580TX 4 port Server >>> Adapter at 0001bc00, 00:0d:88:cc:a5:f0, IRQ 17. [ 17.366350] eth1: >>> MII PHY found at address 1, status 0x7829 advertising 01e1. >>> [ 17.676491] ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 18 (level, >>> low) -> IRQ 18 [ 17.676912] eth2: D-Link DFE-580TX 4 port Server >>> Adapter at 0001b800, 00:0d:88:cc:a5:f1, IRQ 18. [ 17.677864] eth2: >>> MII PHY found at address 1, status 0x7809 advertising 01e1. >>> [ 17.987730] ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 19 (level, >>> low) -> IRQ 16 [ 17.988107] eth3: D-Link DFE-580TX 4 port Server >>> Adapter at 0001b400, 00:0d:88:cc:a5:f2, IRQ 16. [ 17.989059] eth3: >>> MII PHY found at address 1, status 0x7829 advertising 01e1. >>> [ 18.298910] ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 16 (level, >>> low) -> IRQ 19 [ 18.299320] eth4: D-Link DFE-580TX 4 port Server >>> Adapter at 0001b000, 00:0d:88:cc:a5:f3, IRQ 19. [ 18.300272] eth4: >>> MII PHY found at address 1, status 0x7809 advertising 01e1. >>> >>> >>> No such error message appears for about 7-10 days after a reboot. >>> Maybe there is some kind of buffer running full? >>> >>> Do you need any additional info? >>> >>> Please CC me :-) >> (cc netdev) Regards, -- Clemens Koller __________________________________ R&D Imaging Devices Anagramm GmbH Rupert-Mayer-Straße 45/1 Linhof Werksgelände D-81379 München Tel.089-741518-50 Fax 089-741518-19 http://www.anagramm-technology.com ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: D-Link DFE-580TX 4 port NIC problems 2007-07-27 12:08 ` Clemens Koller @ 2007-07-27 15:03 ` adi 2007-07-27 23:41 ` Mario Doering 1 sibling, 0 replies; 5+ messages in thread From: adi @ 2007-07-27 15:03 UTC (permalink / raw) To: Clemens Koller; +Cc: Mario Doering, linux-kernel, netdev On Fri, Jul 27, 2007 at 02:08:09PM +0200, Clemens Koller wrote: > Can you try the latest kernel to see if the same problem > persists? > Is there any kernel version where it was working fine? In my case, this is 'problem' occur when I do run snmpd on the same machine, and I saw that snmpd doing something like this: ... } else if (ioctl(fd, SIOCDEVPRIVATE, &ifr) >= 0) { new_ioctl_nums = 1; } .... That cause sundance printing a lot of debug messages (i.e netdev_ioctl() in sundance.c) .. periodically, as long as snmpd running :-) Regards, P.Y. Adi Prasaja ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: D-Link DFE-580TX 4 port NIC problems 2007-07-27 12:08 ` Clemens Koller 2007-07-27 15:03 ` adi @ 2007-07-27 23:41 ` Mario Doering 1 sibling, 0 replies; 5+ messages in thread From: Mario Doering @ 2007-07-27 23:41 UTC (permalink / raw) To: linux-kernel; +Cc: netdev On Fri, 27 Jul 2007 14:08:09 +0200 Clemens Koller <clemens.koller@anagramm.de> wrote: > Hi, Mario! > > Mario Doering schrieb: > > Hello, > > > > are there any news or questions on this issue? > > Can you try the latest kernel to see if the same problem > persists? > Is there any kernel version where it was working fine? Hello Clemens, I have tried different kernerls with no success so far. I have not tried a 2.6.22 kernel yet, but I can do so of course. It would take some time then again to wait for the error to arise ;-) Bye, Mario. ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2007-07-27 23:41 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20070509120142.2305a1d1@snibbles.dedenet.de>
2007-05-09 10:27 ` D-Link DFE-580TX 4 port NIC problems Andrew Morton
2007-07-27 9:30 ` Mario Doering
2007-07-27 12:08 ` Clemens Koller
2007-07-27 15:03 ` adi
2007-07-27 23:41 ` Mario Doering
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).