From: Florian Fainelli <florian.fainelli@telecomint.eu>
To: hadi@cyberus.ca, Mark Brown <broonie@sirena.org.uk>
Cc: netdev@vger.kernel.org, Richard Purdie <rpurdie@rpsys.net>
Subject: Re: Network activity LED trigger
Date: Thu, 10 May 2007 21:21:05 +0200 [thread overview]
Message-ID: <200705102121.07962.florian.fainelli@telecomint.eu> (raw)
In-Reply-To: <200703021516.06638.florian.fainelli@int-evry.fr>
[-- Attachment #1.1: Type: text/plain, Size: 477 bytes --]
Hi all,
Here comes a basic patch that adds a network led activity. It is not
configurable yet, but is enough to make a LED configured with
the "network-activity" trigger to blink on network activity.
Netdev people can probably comment on the place of ledtrig_network_activity(),
which is probably not adequate. Also the ledtrig_network_activity can be
network device specific for instance.
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
--
[-- Attachment #1.2: ledtrig_network.patch --]
[-- Type: text/plain, Size: 4024 bytes --]
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 80acd08..25d2b58 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -127,5 +127,12 @@ config LEDS_TRIGGER_HEARTBEAT
load average.
If unsure, say Y.
+config LEDS_TRIGGER_NETWORK_ACT
+ tristate "LED Network Activity Trigger"
+ depends on LEDS_TRIGGER && NET
+ help
+ This allow LEDs to be controlled by network activity at layer-3 networking.
+ If unsure, say Y.
+
endmenu
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index aa2c18e..bc899d3 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_LEDS_COBALT) += leds-cobalt.o
obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK) += ledtrig-ide-disk.o
obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o
+obj-$(CONFIG_LEDS_TRIGGER_NETWORK_ACT) += ledtrig-network-activity.o
diff --git a/drivers/leds/ledtrig-network-activity.c b/drivers/leds/ledtrig-network-activity.c
new file mode 100644
index 0000000..88d17bb
--- /dev/null
+++ b/drivers/leds/ledtrig-network-activity.c
@@ -0,0 +1,61 @@
+/*
+ * LED Network Activity Trigger
+ * based on ledtrig-ide-disk by Richard Purdie
+ *
+ * Copyright 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/leds.h>
+
+static void ledtrig_network_timerfunc(unsigned long data);
+
+DEFINE_LED_TRIGGER(ledtrig_network);
+static DEFINE_TIMER(ledtrig_network_timer, ledtrig_network_timerfunc, 0, 0);
+static int network_activity, network_lastactivity;
+
+void ledtrig_network_activity(void)
+{
+ network_activity++;
+ if (!timer_pending(&ledtrig_network_timer))
+ mod_timer(&ledtrig_network_timer, jiffies + msecs_to_jiffies(10));
+}
+EXPORT_SYMBOL(ledtrig_network_activity);
+
+static void ledtrig_network_timerfunc(unsigned long data)
+{
+ if (network_lastactivity != network_activity) {
+ network_lastactivity = network_activity;
+ led_trigger_event(ledtrig_network, LED_FULL);
+ mod_timer(&ledtrig_network_timer, jiffies + msecs_to_jiffies(10));
+ } else {
+ led_trigger_event(ledtrig_network, LED_OFF);
+ }
+}
+
+static int __init ledtrig_network_init(void)
+{
+ led_trigger_register_simple("network-activity", &ledtrig_network);
+ return 0;
+}
+
+static void __exit ledtrig_network_exit(void)
+{
+ led_trigger_unregister_simple(ledtrig_network);
+}
+
+module_init(ledtrig_network_init);
+module_exit(ledtrig_network_exit);
+
+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
+MODULE_DESCRIPTION("LED Network Activity trigger");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 88afcef..ed3774e 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -110,4 +110,10 @@ extern void ledtrig_ide_activity(void);
#define ledtrig_ide_activity() do {} while(0)
#endif
+#ifdef CONFIG_LEDS_TRIGGER_NETWORK_ACT
+extern void ledtrig_network_activity(void);
+#else
+#define ledtrig_network_activity() do {} while(0)
+#endif
+
#endif /* __LINUX_LEDS_H_INCLUDED */
diff --git a/net/core/dev.c b/net/core/dev.c
index 4317c1b..9423b26 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -116,6 +116,7 @@
#include <linux/dmaengine.h>
#include <linux/err.h>
#include <linux/ctype.h>
+#include <linux/leds.h>
/*
* The list of packet types we will receive (as opposed to discard)
@@ -1451,6 +1452,8 @@ int dev_queue_xmit(struct sk_buff *skb)
gso:
spin_lock_prefetch(&dev->queue_lock);
+ ledtrig_network_activity();
+
/* Disable soft irqs for various locks below. Also
* stops preemption for RCU.
*/
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
next prev parent reply other threads:[~2007-05-10 20:01 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-03-01 21:41 Network activity LED trigger Florian Fainelli
2007-03-02 12:58 ` Florian Fainelli
2007-03-02 14:11 ` jamal
2007-03-02 14:16 ` Florian Fainelli
2007-03-02 15:16 ` jamal
2007-03-02 16:03 ` Richard Purdie
2007-03-02 16:19 ` jamal
2007-05-10 19:21 ` Florian Fainelli [this message]
2007-05-10 20:27 ` jamal
2007-03-03 2:20 ` Andi Kleen
-- strict thread matches above, loose matches on Subject: below --
2007-05-23 21:02 Florian Fainelli
2007-05-23 22:12 ` jamal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200705102121.07962.florian.fainelli@telecomint.eu \
--to=florian.fainelli@telecomint.eu \
--cc=broonie@sirena.org.uk \
--cc=hadi@cyberus.ca \
--cc=netdev@vger.kernel.org \
--cc=rpurdie@rpsys.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).