netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stephen Hemminger <shemminger@linux-foundation.org>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: netdev@vger.kernel.org
Subject: [PATCH 4/4] sky2: only disable 88e8056 on some boards
Date: Fri, 11 May 2007 11:21:47 -0700	[thread overview]
Message-ID: <20070511182251.549415549@linux-foundation.org> (raw)
In-Reply-To: 20070511182143.872814956@linux-foundation.org

[-- Attachment #1: sky2-dmi-gigabyte.patch --]
[-- Type: text/plain, Size: 2630 bytes --]

Use DMI to add a blacklist of broken boards (so far only one).
Hopefully, the problems will be solved later, and the the whole
blacklist can disappear.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

---
 drivers/net/sky2.c |   41 ++++++++++++++++++++++++++++++-----------
 1 file changed, 30 insertions(+), 11 deletions(-)

--- net-2.6.orig/drivers/net/sky2.c	2007-05-11 11:08:25.000000000 -0700
+++ net-2.6/drivers/net/sky2.c	2007-05-11 11:13:01.000000000 -0700
@@ -40,6 +40,7 @@
 #include <linux/if_vlan.h>
 #include <linux/prefetch.h>
 #include <linux/mii.h>
+#include <linux/dmi.h>
 
 #include <asm/irq.h>
 
@@ -150,6 +151,8 @@ static const char *yukon2_name[] = {
 	"FE",		/* 0xb7 */
 };
 
+static int dmi_blacklisted;
+
 /* Access to external PHY */
 static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val)
 {
@@ -2531,6 +2534,17 @@ static int __devinit sky2_init(struct sk
 		return -EOPNOTSUPP;
 	}
 
+
+	/* Some Gigabyte motherboards have 88e8056 but cause problems
+	 * There is some unresolved hardware related problem that causes
+	 * descriptor errors and receive data corruption.
+	 */
+	if (hw->chip_id == CHIP_ID_YUKON_EC_U && dmi_blacklisted) {
+		dev_err(&hw->pdev->dev,
+			"88E8056 on this motherboard not supported\n");
+		return -EOPNOTSUPP;
+	}
+
 	hw->pmd_type = sky2_read8(hw, B2_PMD_TYP);
 	hw->ports = 1;
 	t8 = sky2_read8(hw, B2_Y2_HW_RES);
@@ -3578,17 +3592,6 @@ static int __devinit sky2_probe(struct p
 		goto err_out;
 	}
 
-	/* Some Gigabyte motherboards have 88e8056 but cause problems
-	 * There is some unresolved hardware related problem that causes
-	 * descriptor errors and receive data corruption.
-	 */
-	if (pdev->vendor == PCI_VENDOR_ID_MARVELL &&
-	    pdev->device == 0x4364 && pdev->subsystem_vendor == 0x1458) {
-		dev_err(&pdev->dev,
-			"88E8056 on Gigabyte motherboards not supported\n");
-		goto err_out_disable;
-	}
-
 	err = pci_request_regions(pdev, DRV_NAME);
 	if (err) {
 		dev_err(&pdev->dev, "cannot obtain PCI resources\n");
@@ -3907,8 +3910,24 @@ static struct pci_driver sky2_driver = {
 	.shutdown = sky2_shutdown,
 };
 
+static struct dmi_system_id __initdata broken_dmi_table[] = {
+	{
+		.ident = "Gigabyte 965P-S3",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Gigabyte Technology Co., Ltd."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "965P-S3"),
+
+		},
+	},
+	{ }
+};
+
 static int __init sky2_init_module(void)
 {
+	/* Look for sick motherboards */
+	if (dmi_check_system(broken_dmi_table))
+		dmi_blacklisted = 1;
+
 	return pci_register_driver(&sky2_driver);
 }
 

--
Stephen Hemminger <shemminger@linux-foundation.org>


      parent reply	other threads:[~2007-05-11 18:25 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-05-11 18:21 [PATCH 0/4] sky2/skge bug fix patches for 2.6.22 Stephen Hemminger
2007-05-11 18:21 ` [PATCH 1/4] sky2: fix oops on shutdown Stephen Hemminger
2007-05-11 20:58   ` Jeff Garzik
2007-05-11 18:21 ` [PATCH 2/4] skge: crash on shutdown/suspend Stephen Hemminger
2007-05-11 18:21 ` [PATCH 3/4] sky2: 88e8071 support not ready Stephen Hemminger
2007-05-11 18:21 ` Stephen Hemminger [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070511182251.549415549@linux-foundation.org \
    --to=shemminger@linux-foundation.org \
    --cc=jgarzik@pobox.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).