From: "YOSHIFUJI Hideaki / 吉藤英明" <yoshfuji@linux-ipv6.org>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, yoshfuji@linux-ipv6.org, stable@kernel.org
Subject: [PATCH 2.6.21-stable] [IPV6]: Restore semantics of Routing Header processing.
Date: Sat, 12 May 2007 01:17:28 +0900 (JST) [thread overview]
Message-ID: <20070512.011728.16743460.yoshfuji@linux-ipv6.org> (raw)
The "fix" for emerging security threats was overkill and it broke
basic semantic of IPv6 routing header processing. We should assume
RT0 (or even RT2, depends on configuration) as "unknown" RH type so
that we
- silently ignore the routing header if segleft == 0
- or, send ICMPv6 Parameter Problem message back to the sender,
otherwise.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
---
net/ipv6/exthdrs.c | 46 ++++++++++++++++------------------------------
1 files changed, 16 insertions(+), 30 deletions(-)
diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c
index 3205ec9..6386dd7 100644
--- a/net/ipv6/exthdrs.c
+++ b/net/ipv6/exthdrs.c
@@ -368,22 +368,13 @@ static int ipv6_rthdr_rcv(struct sk_buff **skbp)
struct rt0_hdr *rthdr;
int accept_source_route = ipv6_devconf.accept_source_route;
- if (accept_source_route < 0 ||
- ((idev = in6_dev_get(skb->dev)) == NULL)) {
- kfree_skb(skb);
- return -1;
- }
- if (idev->cnf.accept_source_route < 0) {
+ idev = in6_dev_get(skb->dev);
+ if (idev) {
+ if (accept_source_route > idev->cnf.accept_source_route)
+ accept_source_route = idev->cnf.accept_source_route;
in6_dev_put(idev);
- kfree_skb(skb);
- return -1;
}
- if (accept_source_route > idev->cnf.accept_source_route)
- accept_source_route = idev->cnf.accept_source_route;
-
- in6_dev_put(idev);
-
if (!pskb_may_pull(skb, (skb->h.raw-skb->data)+8) ||
!pskb_may_pull(skb, (skb->h.raw-skb->data)+((skb->h.raw[1]+1)<<3))) {
IP6_INC_STATS_BH(ip6_dst_idev(skb->dst),
@@ -394,23 +385,6 @@ static int ipv6_rthdr_rcv(struct sk_buff **skbp)
hdr = (struct ipv6_rt_hdr *) skb->h.raw;
- switch (hdr->type) {
-#ifdef CONFIG_IPV6_MIP6
- case IPV6_SRCRT_TYPE_2:
- break;
-#endif
- case IPV6_SRCRT_TYPE_0:
- if (accept_source_route > 0)
- break;
- kfree_skb(skb);
- return -1;
- default:
- IP6_INC_STATS_BH(ip6_dst_idev(skb->dst),
- IPSTATS_MIB_INHDRERRORS);
- icmpv6_param_prob(skb, ICMPV6_HDR_FIELD, (&hdr->type) - skb->nh.raw);
- return -1;
- }
-
if (ipv6_addr_is_multicast(&skb->nh.ipv6h->daddr) ||
skb->pkt_type != PACKET_HOST) {
IP6_INC_STATS_BH(ip6_dst_idev(skb->dst),
@@ -450,6 +424,8 @@ looped_back:
switch (hdr->type) {
case IPV6_SRCRT_TYPE_0:
+ if (accept_source_route <= 0)
+ goto unknown_rh;
if (hdr->hdrlen & 0x01) {
IP6_INC_STATS_BH(ip6_dst_idev(skb->dst),
IPSTATS_MIB_INHDRERRORS);
@@ -459,6 +435,8 @@ looped_back:
break;
#ifdef CONFIG_IPV6_MIP6
case IPV6_SRCRT_TYPE_2:
+ if (accept_source_route < 0)
+ goto unknown_rh;
/* Silently discard invalid RTH type 2 */
if (hdr->hdrlen != 2 || hdr->segments_left != 1) {
IP6_INC_STATS_BH(ip6_dst_idev(skb->dst),
@@ -468,6 +446,8 @@ looped_back:
}
break;
#endif
+ default:
+ goto unknown_rh;
}
/*
@@ -569,6 +549,12 @@ looped_back:
skb_push(skb, skb->data - skb->nh.raw);
dst_input(skb);
return -1;
+
+unknown_rh:
+ IP6_INC_STATS_BH(ip6_dst_idev(skb->dst), IPSTATS_MIB_INHDRERRORS);
+ icmpv6_param_prob(skb, ICMPV6_HDR_FIELD,
+ (&hdr->type) - skb->nh.raw);
+ return -1;
}
static struct inet6_protocol rthdr_protocol = {
--
1.5.1
--
YOSHIFUJI Hideaki @ USAGI Project <yoshfuji@linux-ipv6.org>
GPG-FP : 9022 65EB 1ECF 3AD1 0BDF 80D8 4807 F894 E062 0EEA
next reply other threads:[~2007-05-11 16:17 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-11 16:17 YOSHIFUJI Hideaki / 吉藤英明 [this message]
2007-05-11 16:22 ` [stable] [PATCH 2.6.21-stable] [IPV6]: Restore semantics of Routing Header processing Chris Wright
2007-05-11 16:28 ` YOSHIFUJI Hideaki / 吉藤英明
2007-05-11 16:29 ` Chris Wright
2007-05-17 1:46 ` Chris Wright
[not found] ` <20070516.191013.102573773.davem@davemloft.net>
2007-05-17 2:12 ` Chris Wright
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070512.011728.16743460.yoshfuji@linux-ipv6.org \
--to=yoshfuji@linux-ipv6.org \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=stable@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).