* Re: kernel oops after unloading nf_conntrack_netbios_ns_module [not found] <20070510090603.GA13059@odin.sis.hu> @ 2007-05-10 10:34 ` Andrew Morton 2007-05-10 11:01 ` Gabor Burjan 0 siblings, 1 reply; 5+ messages in thread From: Andrew Morton @ 2007-05-10 10:34 UTC (permalink / raw) To: Gabor Burjan; +Cc: linux-kernel, netdev (add netdev to cc) On Thu, 10 May 2007 11:06:03 +0200 Gabor Burjan <buga@buvoshetes.hu> wrote: > Hi, > > [1.] One line summary of the problem: > > Kernel oops after unloading nf_conntrack_netbios_ns module > > [2.] Full description of the problem/report: > > After I remove the netbios-ns conntrack module,the kernel runs into an oops > when it tries to delete the appropriate conntrack entry. The problem is > reproducable, see the script below [7.]. My system has a Core2Duo processon, > probably this problem is SMP related problem. > > [3.] Keywords (i.e., modules, networking, kernel): > > modules, networking, netfilter, conntrack, netbios > > [4.] Kernel information > [4.1.] Kernel version (from /proc/version): > > Linux version 2.6.20-1-686 (Debian 2.6.20-3) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Tue Apr 24 21:52:11 UTC 2007 > > [4.2.] Kernel .config file: > > ... > > [5.] Most recent kernel version which did not have the bug: > > Debian 2.6.18-4 (ip_conntrack_netbios_ns module) So it's a regression. > [6.] Output of Oops.. message (if applicable) with symbolic information > resolved (see Documentation/oops-tracing.txt) > > > ksymoops 2.4.11 on i686 2.6.20-1-686. Options used > -V (default) > -k /proc/ksyms (default) > -l /proc/modules (default) > -o /lib/modules/2.6.20-1-686/ (default) > -m /boot/System.map-2.6.20-1-686 (specified) > > Error (regular_file): read_ksyms stat /proc/ksyms failed > No modules in ksyms, skipping objects > No ksyms, skipping lsmod > BUG: unable to handle kernel paging request at virtual address f898b9ec > f89ea20c > *pde = 02100067 > Oops: 0000 [#1] > CPU: 0 > EIP: 0060:[<f89ea20c>] Not tainted VLI > Using defaults from ksymoops -t elf32-i386 -a i386 > EFLAGS: 00010282 (2.6.20-1-686 #1) > eax: f898b980 ebx: c21d7194 ecx: c21d7194 edx: 00000000 > esi: c21d7270 edi: f89e9823 ebp: 00000000 esp: c0337f1c > ds: 007b es: 007b ss: 0068 > Stack: c23ed140 00000000 f89ea2d8 c23ed140 c0389b00 f89e98a2 00000100 c0128a66 > 00000000 c010613e c01465a2 c01082ee c0337f4c c0337f4c 00000021 c032ff48 > 0000000a c012538a 00000046 00000000 c0336008 00000008 c0125433 00000000 > Call Trace: > [<f89ea2d8>] destroy_conntrack+0x11e/0x127 [nf_conntrack] > [<f89e98a2>] death_by_timeout+0x7f/0x81 [nf_conntrack] > [<c0128a66>] run_timer_softirq+0x107/0x170 > [<c010613e>] timer_interrupt+0x65/0x6b > [<c01465a2>] handle_IRQ_event+0x23/0x51 > [<c01082ee>] sched_clock+0x3f/0x59 > [<c012538a>] __do_softirq+0x66/0xcc > [<c0125433>] do_softirq+0x43/0x51 > [<c0113b95>] smp_apic_timer_interrupt+0x74/0x7f > [<c0103800>] apic_timer_interrupt+0x28/0x30 > [<c0101240>] mwait_idle_with_hints+0x3b/0x3f > [<c01013af>] cpu_idle+0xb0/0xc9 > [<c033b7b1>] start_kernel+0x3f7/0x3ff > [<c033b1b8>] unknown_bootoption+0x0/0x202 > Code: 74 19 8b 43 68 f6 c4 02 75 11 89 d9 ba 04 00 00 00 b8 e4 6e 9f f8 e8 10 22 74 c7 f0 0f ba 6b 68 09 85 f6 74 11 8b 06 85 c0 74 0b <8b> 50 6c 85 d2 74 04 89 d8 ff d2 0f b7 43 52 ba 40 66 9f f8 66 ksymoops seems to have gone and hidden the actual EIP decide from us. ksymoops is no longer necessary as long as CONFIG_KALLSYMS=y. Are you able to send just the raw oops message from dmesg please? > > >>EIP; f89ea20c <END_OF_CODE+3863e20c/????> <===== > > >>esp; c0337f1c <init_thread_union+1f1c/2000> > > Trace; f89ea2d8 <END_OF_CODE+3863e2d8/????> > Trace; f89e98a2 <END_OF_CODE+3863d8a2/????> > Trace; c0128a66 <run_timer_softirq+107/170> > Trace; c010613e <timer_interrupt+65/6b> > Trace; c01465a2 <handle_IRQ_event+23/51> > Trace; c01082ee <sched_clock+3f/59> > Trace; c012538a <__do_softirq+66/cc> > Trace; c0125433 <do_softirq+43/51> > Trace; c0113b95 <smp_apic_timer_interrupt+74/7f> > Trace; c0103800 <apic_timer_interrupt+28/30> > Trace; c0101240 <mwait_idle_with_hints+3b/3f> > Trace; c01013af <cpu_idle+b0/c9> > Trace; c033b7b1 <start_kernel+3f7/3ff> > Trace; c033b1b8 <unknown_bootoption+0/202> > > This architecture has variable length instructions, decoding before eip > is unreliable, take these instructions with a pinch of salt. > > Code; f89ea1e1 <END_OF_CODE+3863e1e1/????> > 00000000 <_EIP>: > Code; f89ea1e1 <END_OF_CODE+3863e1e1/????> > 0: 74 19 je 1b <_EIP+0x1b> > Code; f89ea1e3 <END_OF_CODE+3863e1e3/????> > 2: 8b 43 68 mov 0x68(%ebx),%eax > Code; f89ea1e6 <END_OF_CODE+3863e1e6/????> > 5: f6 c4 02 test $0x2,%ah > Code; f89ea1e9 <END_OF_CODE+3863e1e9/????> > 8: 75 11 jne 1b <_EIP+0x1b> > Code; f89ea1eb <END_OF_CODE+3863e1eb/????> > a: 89 d9 mov %ebx,%ecx > Code; f89ea1ed <END_OF_CODE+3863e1ed/????> > c: ba 04 00 00 00 mov $0x4,%edx > Code; f89ea1f2 <END_OF_CODE+3863e1f2/????> > 11: b8 e4 6e 9f f8 mov $0xf89f6ee4,%eax > Code; f89ea1f7 <END_OF_CODE+3863e1f7/????> > 16: e8 10 22 74 c7 call c774222b <_EIP+0xc774222b> > Code; f89ea1fc <END_OF_CODE+3863e1fc/????> > 1b: f0 0f ba 6b 68 09 lock btsl $0x9,0x68(%ebx) > Code; f89ea202 <END_OF_CODE+3863e202/????> > 21: 85 f6 test %esi,%esi > Code; f89ea204 <END_OF_CODE+3863e204/????> > 23: 74 11 je 36 <_EIP+0x36> > Code; f89ea206 <END_OF_CODE+3863e206/????> > 25: 8b 06 mov (%esi),%eax > Code; f89ea208 <END_OF_CODE+3863e208/????> > 27: 85 c0 test %eax,%eax > Code; f89ea20a <END_OF_CODE+3863e20a/????> > 29: 74 0b je 36 <_EIP+0x36> > > This decode from eip onwards should be reliable > > Code; f89ea20c <END_OF_CODE+3863e20c/????> > 00000000 <_EIP>: > Code; f89ea20c <END_OF_CODE+3863e20c/????> <===== > 0: 8b 50 6c mov 0x6c(%eax),%edx <===== > Code; f89ea20f <END_OF_CODE+3863e20f/????> > 3: 85 d2 test %edx,%edx > Code; f89ea211 <END_OF_CODE+3863e211/????> > 5: 74 04 je b <_EIP+0xb> > Code; f89ea213 <END_OF_CODE+3863e213/????> > 7: 89 d8 mov %ebx,%eax > Code; f89ea215 <END_OF_CODE+3863e215/????> > 9: ff d2 call *%edx > Code; f89ea217 <END_OF_CODE+3863e217/????> > b: 0f b7 43 52 movzwl 0x52(%ebx),%eax > Code; f89ea21b <END_OF_CODE+3863e21b/????> > f: ba 40 66 9f f8 mov $0xf89f6640,%edx > Code; f89ea220 <END_OF_CODE+3863e220/????> > 14: 66 data16 > > EIP: [<f89ea20c>] destroy_conntrack+0x52/0x127 [nf_conntrack] SS:ESP 0068:c0337f1c > <0>Kernel panic - not syncing: Fatal exception in interrupt > [<c01118de>] smp_call_function+0x66/0x10b > [<c0121778>] printk+0x1b/0x1f > [<c011199e>] smp_send_stop+0x1b/0x36 > [<c0120d2b>] panic+0x54/0xf5 > [<c01041dc>] die+0x205/0x239 > [<c0119363>] do_page_fault+0x45e/0x53b > [<c0118f05>] do_page_fault+0x0/0x53b > [<c02999ac>] error_code+0x7c/0x84 > [<f89e9823>] death_by_timeout+0x0/0x81 [nf_conntrack] > [<f89ea20c>] destroy_conntrack+0x52/0x127 [nf_conntrack] > [<f89ea2d8>] destroy_conntrack+0x11e/0x127 [nf_conntrack] > [<f89e98a2>] death_by_timeout+0x7f/0x81 [nf_conntrack] > [<c0128a66>] run_timer_softirq+0x107/0x170 > [<c010613e>] timer_interrupt+0x65/0x6b > [<c01465a2>] handle_IRQ_event+0x23/0x51 > [<c01082ee>] sched_clock+0x3f/0x59 > [<c012538a>] __do_softirq+0x66/0xcc > [<c0125433>] do_softirq+0x43/0x51 > [<c0113b95>] smp_apic_timer_interrupt+0x74/0x7f > [<c0103800>] apic_timer_interrupt+0x28/0x30 > [<c0101240>] mwait_idle_with_hints+0x3b/0x3f > [<c01013af>] cpu_idle+0xb0/0xc9 > [<c033b7b1>] start_kernel+0x3f7/0x3ff > [<c033b1b8>] unknown_bootoption+0x0/0x202 > Warning (Oops_read): Code line not seen, dumping what data is available > > > >>EIP; f89ea20c <END_OF_CODE+3863e20c/????> <===== > > > 1 warning and 1 error issued. Results may not be reliable. > > > [7.] A small shell script or example program which triggers the > problem (if possible) > > after booting with init=/bin/sh (clean environment) > > <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< > #!/bin/sh -x > > ifconfig eth0 <ip> netmask <netmask> > > sleep 5 > > modprobe nf_conntrack_netbios_ns > > sleep 3 > > iptables -F > iptables -P INPUT DROP > iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT > iptables -P OUTPUT ACCEPT > > sleep 3 > > nmblookup <existing_netbios_name> > cat /proc/net/ip_conntrack > > sleep 3 > > rmmod nf_conntrack_netbios_ns > > watch -n 1 cat /proc/net/ip_conntrack > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > > [8.] Environment > [8.1.] Software (add the output of the ver_linux script here) > > If some fields are empty or look unusual you may have an old version. > Compare to the current minimal requirements in Documentation/Changes. > > Linux duplo 2.6.20-1-686 #1 SMP Tue Apr 24 21:52:11 UTC 2007 i686 GNU/Linux > > Gnu C 4.1.3 > Gnu make 3.81 > binutils Binutils > util-linux 2.12r > mount 2.12r > module-init-tools 3.3-pre2 > e2fsprogs 1.40-WIP > Linux C Library > libc.2.5 > Dynamic linker (ldd) 2.5 > Procps 3.2.7 > Net-tools 1.60 > Kbd 85: > Sh-utils 5.97 > udev 105 > Modules Loaded nf_conntrack_ipv4 xt_state iptable_filter ip_tables x_tables nf_conntrack_netbios_ns nf_conntrack nfnetlink ext3 jbd mbcache dm_mirror dm_snapshot dm_mod raid10 raid456 xor raid1 raid0 multipath linear md_mod ide_cd cdrom sd_mod ata_generic usbhid hid ata_piix libata scsi_mod piix floppy ehci_hcd uhci_hcd generic ide_core e1000 usbcore thermal processor fan > > [8.2.] Processor information (from /proc/cpuinfo): > > processor : 0 > vendor_id : GenuineIntel > cpu family : 6 > model : 15 > model name : Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz > stepping : 6 > cpu MHz : 2128.070 > cache size : 2048 KB > physical id : 0 > siblings : 2 > core id : 0 > cpu cores : 2 > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 10 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm > bogomips : 4259.22 > clflush size : 64 > > processor : 1 > vendor_id : GenuineIntel > cpu family : 6 > model : 15 > model name : Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz > stepping : 6 > cpu MHz : 2128.070 > cache size : 2048 KB > physical id : 0 > siblings : 2 > core id : 1 > cpu cores : 2 > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 10 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm > bogomips : 4256.21 > clflush size : 64 > > [8.3.] Module information (from /proc/modules): > > Module Size Used by > nf_conntrack_ipv4 17772 1 > xt_state 2560 1 > iptable_filter 3072 1 > ip_tables 12324 1 iptable_filter > x_tables 14628 2 xt_state,ip_tables > nf_conntrack_netbios_ns 3168 0 > nf_conntrack 58440 3 nf_conntrack_ipv4,xt_state,nf_conntrack_netbios_ns > nfnetlink 6648 2 nf_conntrack_ipv4,nf_conntrack > ext3 121032 1 > jbd 55368 1 ext3 > mbcache 8420 1 ext3 > dm_mirror 20340 0 > dm_snapshot 16580 0 > dm_mod 52812 2 dm_mirror,dm_snapshot > raid10 22656 0 > raid456 119568 0 > xor 14504 1 raid456 > raid1 22144 0 > raid0 8096 0 > multipath 8576 0 > linear 5984 0 > md_mod 71860 6 raid10,raid456,raid1,raid0,multipath,linear > ide_cd 36672 0 > cdrom 32960 1 ide_cd > sd_mod 19968 2 > ata_generic 7876 0 > usbhid 23136 0 > hid 22784 1 usbhid > ata_piix 13860 1 > libata 100052 2 ata_generic,ata_piix > scsi_mod 133100 2 sd_mod,libata > piix 9540 0 [permanent] > floppy 54468 0 > ehci_hcd 29132 0 > uhci_hcd 22160 0 > generic 4932 0 [permanent] > ide_core 114728 3 ide_cd,piix,generic > e1000 113376 0 > usbcore 122312 4 usbhid,ehci_hcd,uhci_hcd > thermal 13928 0 > processor 30536 1 thermal > fan 4772 0 > > [8.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) > > /proc/ioports: > > 0000-001f : dma1 > 0020-0021 : pic1 > 0040-0043 : timer0 > 0050-0053 : timer1 > 0060-006f : keyboard > 0080-008f : dma page reg > 00a0-00a1 : pic2 > 00c0-00df : dma2 > 00f0-00ff : fpu > 0170-0177 : 0000:00:1f.1 > 01f0-01f7 : 0000:00:1f.1 > 01f0-01f7 : ide0 > 0290-0297 : pnp 00:08 > 0376-0376 : 0000:00:1f.1 > 03c0-03df : vga+ > 03f2-03f5 : floppy > 03f6-03f6 : 0000:00:1f.1 > 03f6-03f6 : ide0 > 03f7-03f7 : floppy DIR > 03f8-03ff : serial > 0400-041f : 0000:00:1f.3 > 0410-0415 : ACPI CPU throttle > 0480-04bf : 0000:00:1f.0 > 0800-087f : 0000:00:1f.0 > 0800-0803 : ACPI PM1a_EVT_BLK > 0804-0805 : ACPI PM1a_CNT_BLK > 0808-080b : ACPI PM_TMR > 0820-0820 : ACPI PM2_CNT_BLK > 0828-082f : ACPI GPE0_BLK > 0cf8-0cff : PCI conf1 > 8000-801f : 0000:00:1d.0 > 8000-801f : uhci_hcd > 8400-841f : 0000:00:1d.1 > 8400-841f : uhci_hcd > 8800-881f : 0000:00:1d.2 > 8800-881f : uhci_hcd > 9000-901f : 0000:00:1d.3 > 9000-901f : uhci_hcd > 9400-940f : 0000:00:1f.2 > 9400-940f : libata > 9800-9803 : 0000:00:1f.2 > 9800-9803 : libata > a000-a007 : 0000:00:1f.2 > a000-a007 : libata > a400-a403 : 0000:00:1f.2 > a400-a403 : libata > a800-a807 : 0000:00:1f.2 > a800-a807 : libata > b000-bfff : PCI Bus #01 > c000-cfff : PCI Bus #02 > c800-c81f : 0000:02:00.0 > c800-c81f : e1000 > d000-dfff : PCI Bus #03 > e000-efff : PCI Bus #04 > ffa0-ffaf : 0000:00:1f.1 > ffa0-ffa7 : ide0 > ffa8-ffaf : ide1 > > iomem: > > 00000000-0009fbff : System RAM > 00000000-00000000 : Crash kernel > 0009fc00-0009ffff : reserved > 000a0000-000bffff : Video RAM area > 000c0000-000cefff : Video ROM > 000f0000-000fffff : System ROM > 00100000-7ff9ffff : System RAM > 00100000-0029a5e4 : Kernel code > 0029a5e5-003353b3 : Kernel data > 7ffa0000-7ffadfff : ACPI Tables > 7ffae000-7ffdffff : ACPI Non-volatile Storage > 7ffe0000-7fffffff : reserved > cddf8000-cddfbfff : 0000:00:1b.0 > cddffc00-cddfffff : 0000:00:1d.7 > cddffc00-cddfffff : ehci_hcd > cde00000-cdefffff : PCI Bus #02 > cdee0000-cdefffff : 0000:02:00.0 > cdee0000-cdefffff : e1000 > cdf00000-cfffffff : PCI Bus #04 > cdfe0000-cdffffff : 0000:04:00.0 > ce000000-ceffffff : 0000:04:00.0 > cf000000-cfffffff : 0000:04:00.0 > d0000000-dfffffff : PCI Bus #04 > d0000000-dfffffff : 0000:04:00.0 > ffb80000-ffffffff : reserved > > [8.5.] PCI information ('lspci -vvv' as root) > > 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) > Subsystem: ASUSTeK Computer Inc. Unknown device 817a > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- > Latency: 0 > Capabilities: [e0] Vendor Specific Information > > 00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 16 bytes > Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 > I/O behind bridge: 0000e000-0000efff > Memory behind bridge: cdf00000-cfffffff > Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- > Capabilities: [88] Subsystem: Intel Corporation Unknown device 0000 > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ > Address: fee0300c Data: 41b9 > Capabilities: [a0] Express Root Port (Slot+) IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- > Device: Latency L0s <64ns, L1 <1us > Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ > Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > Device: MaxPayload 128 bytes, MaxReadReq 128 bytes > Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 2 > Link: Latency L0s <256ns, L1 <4us > Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- > Link: Speed 2.5Gb/s, Width x16 > Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- > Slot: Number 0, PowerLimit 75.000000 > Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- > Slot: AttnInd Off, PwrInd On, Power- > Root: Correctable- Non-Fatal- Fatal- PME- > > 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) > Subsystem: ASUSTeK Computer Inc. Unknown device 8237 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 16 bytes > Interrupt: pin A routed to IRQ 5 > Region 0: Memory at cddf8000 (64-bit, non-prefetchable) [size=16K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [70] Express Unknown type IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- > Device: Latency L0s <64ns, L1 <1us > Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- > Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > Device: MaxPayload 128 bytes, MaxReadReq 128 bytes > Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0 > Link: Latency L0s <64ns, L1 <1us > Link: ASPM Disabled CommClk- ExtSynch- > Link: Speed unknown, Width x0 > > 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 16 bytes > Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 > I/O behind bridge: 0000d000-0000dfff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: [40] Express Root Port (Slot+) IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- > Device: Latency L0s unlimited, L1 unlimited > Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ > Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > Device: MaxPayload 128 bytes, MaxReadReq 128 bytes > Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1 > Link: Latency L0s <256ns, L1 <4us > Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- > Link: Speed 2.5Gb/s, Width x0 > Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ > Slot: Number 1, PowerLimit 10.000000 > Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- > Slot: AttnInd Unknown, PwrInd Unknown, Power- > Root: Correctable- Non-Fatal- Fatal- PME- > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ > Address: fee0300c Data: 41c1 > Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Unknown device 8179 > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 16 bytes > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > I/O behind bridge: 0000c000-0000cfff > Memory behind bridge: cde00000-cdefffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: [40] Express Root Port (Slot-) IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- > Device: Latency L0s unlimited, L1 unlimited > Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ > Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > Device: MaxPayload 128 bytes, MaxReadReq 128 bytes > Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2 > Link: Latency L0s <256ns, L1 <4us > Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- > Link: Speed 2.5Gb/s, Width x1 > Root: Correctable- Non-Fatal- Fatal- PME- > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ > Address: fee0300c Data: 41c9 > Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Unknown device 8179 > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) (prog-if 00 [UHCI]) > Subsystem: ASUSTeK Computer Inc. Unknown device 8179 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 18 > Region 4: I/O ports at 8000 [size=32] > > 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) (prog-if 00 [UHCI]) > Subsystem: ASUSTeK Computer Inc. Unknown device 8179 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin B routed to IRQ 17 > Region 4: I/O ports at 8400 [size=32] > > 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) (prog-if 00 [UHCI]) > Subsystem: ASUSTeK Computer Inc. Unknown device 8179 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin C routed to IRQ 19 > Region 4: I/O ports at 8800 [size=32] > > 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) (prog-if 00 [UHCI]) > Subsystem: ASUSTeK Computer Inc. Unknown device 8179 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin D routed to IRQ 20 > Region 4: I/O ports at 9000 [size=32] > > 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) > Subsystem: ASUSTeK Computer Inc. Unknown device 8179 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 18 > Region 0: Memory at cddffc00 (32-bit, non-prefetchable) [size=1K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Debug port > > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 > I/O behind bridge: 0000b000-0000bfff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Unknown device 8179 > > 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) > Subsystem: ASUSTeK Computer Inc. Unknown device 8179 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Capabilities: [e0] Vendor Specific Information > > 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP]) > Subsystem: ASUSTeK Computer Inc. Unknown device 8179 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 19 > Region 0: I/O ports at 01f0 [size=8] > Region 1: I/O ports at 03f4 [size=1] > Region 2: I/O ports at 0170 [size=8] > Region 3: I/O ports at 0374 [size=1] > Region 4: I/O ports at ffa0 [size=16] > > 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) > Subsystem: ASUSTeK Computer Inc. Unknown device 2601 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin B routed to IRQ 17 > Region 0: I/O ports at a800 [size=8] > Region 1: I/O ports at a400 [size=4] > Region 2: I/O ports at a000 [size=8] > Region 3: I/O ports at 9800 [size=4] > Region 4: I/O ports at 9400 [size=16] > Capabilities: [70] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) > Subsystem: ASUSTeK Computer Inc. Unknown device 8179 > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Interrupt: pin B routed to IRQ 0 > Region 4: I/O ports at 0400 [size=32] > > 02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller > Subsystem: ASUSTeK Computer Inc. Unknown device 81c2 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 220 > Region 0: Memory at cdee0000 (32-bit, non-prefetchable) [size=128K] > Region 2: I/O ports at c800 [size=32] > Capabilities: [c8] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=1 PME- > Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ > Address: 00000000fee0300c Data: 41e9 > Capabilities: [e0] Express Endpoint IRQ 0 > Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- > Device: Latency L0s <512ns, L1 <64us > Device: AtnBtn- AtnInd- PwrInd- > Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- > Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > Device: MaxPayload 128 bytes, MaxReadReq 512 bytes > Link: Supported Speed 2.5Gb/s, Width x1, ASPM unknown, Port 0 > Link: Latency L0s <128ns, L1 <64us > Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- > Link: Speed 2.5Gb/s, Width x1 > > 04:00.0 VGA compatible controller: nVidia Corporation GeForce 7300 GS (rev a1) (prog-if 00 [VGA]) > Subsystem: ASUSTeK Computer Inc. Unknown device 81f1 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 16 bytes > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at cf000000 (32-bit, non-prefetchable) [size=16M] > Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] > Region 3: Memory at ce000000 (64-bit, non-prefetchable) [size=16M] > Expansion ROM at cdfe0000 [disabled] [size=128K] > Capabilities: [60] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [78] Express Endpoint IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- > Device: Latency L0s <256ns, L1 <4us > Device: AtnBtn- AtnInd- PwrInd- > Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- > Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > Device: MaxPayload 128 bytes, MaxReadReq 512 bytes > Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0 > Link: Latency L0s <256ns, L1 <4us > Link: ASPM Disabled RCB 128 bytes CommClk+ ExtSynch- > Link: Speed 2.5Gb/s, Width x16 > > [8.6.] SCSI information (from /proc/scsi/scsi) > > (SATA) > > Attached devices: > Host: scsi0 Channel: 00 Id: 00 Lun: 00 > Vendor: ATA Model: SAMSUNG HD080HJ Rev: ZH10 > Type: Direct-Access ANSI SCSI revision: 05 > Host: scsi1 Channel: 00 Id: 00 Lun: 00 > Vendor: ATA Model: SAMSUNG HD080HJ Rev: ZH10 > Type: Direct-Access ANSI SCSI revision: 05 > > > buga > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: kernel oops after unloading nf_conntrack_netbios_ns_module 2007-05-10 10:34 ` kernel oops after unloading nf_conntrack_netbios_ns_module Andrew Morton @ 2007-05-10 11:01 ` Gabor Burjan 2007-05-12 15:05 ` Patrick McHardy 0 siblings, 1 reply; 5+ messages in thread From: Gabor Burjan @ 2007-05-10 11:01 UTC (permalink / raw) To: Andrew Morton; +Cc: linux-kernel, netdev Hi, On Thu, May 10, 2007 at 03:34:11AM -0700, Andrew Morton wrote: > > (add netdev to cc) > > On Thu, 10 May 2007 11:06:03 +0200 Gabor Burjan <buga@buvoshetes.hu> wrote: > > > Hi, > > > > [1.] One line summary of the problem: > > > > Kernel oops after unloading nf_conntrack_netbios_ns module > > > > [2.] Full description of the problem/report: > > > > After I remove the netbios-ns conntrack module,the kernel runs into an oops > > when it tries to delete the appropriate conntrack entry. The problem is > > reproducable, see the script below [7.]. My system has a Core2Duo processon, > > probably this problem is SMP related problem. > > > > [3.] Keywords (i.e., modules, networking, kernel): > > > > modules, networking, netfilter, conntrack, netbios > > > > [4.] Kernel information > > [4.1.] Kernel version (from /proc/version): > > > > Linux version 2.6.20-1-686 (Debian 2.6.20-3) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Tue Apr 24 21:52:11 UTC 2007 > > > > [4.2.] Kernel .config file: > > > > ... > > > > [5.] Most recent kernel version which did not have the bug: > > > > Debian 2.6.18-4 (ip_conntrack_netbios_ns module) > > So it's a regression. > > > [6.] Output of Oops.. message (if applicable) with symbolic information > > resolved (see Documentation/oops-tracing.txt) > > > > > > [...] > > ksymoops seems to have gone and hidden the actual EIP decide from us. > > ksymoops is no longer necessary as long as CONFIG_KALLSYMS=y. Are you able > to send just the raw oops message from dmesg please? BUG: unable to handle kernel paging request at virtual address f898b9ec printing eip: f89ea20c *pde = 02100067 *pte = 00000000 Oops: 0000 [#1] SMP Modules linked in: ipt_REJECT ipt_LOG xt_tcpudp nf_conntrack_ipv4 xt_state nf_conntrack nfnetlink iptable_filter ip_tables x_tables ext3 jbd mbcache dm_mirror dm_snapshot dm_mod raid10 raid456 xor raid1 raid0 multipath linear md_mod sd_mod ide_cd cdrom usbhid hid ata_generic ata_piix libata scsi_mod piix ehci_hcd uhci_hcd generic floppy ide_core e1000 usbcore thermal processor fan CPU: 0 EIP: 0060:[<f89ea20c>] Not tainted VLI EFLAGS: 00010282 (2.6.20-1-686 #1) EIP is at destroy_conntrack+0x52/0x127 [nf_conntrack] eax: f898b980 ebx: c21d7194 ecx: c21d7194 edx: 00000000 esi: c21d7270 edi: f89e9823 ebp: 00000000 esp: c0337f1c ds: 007b es: 007b ss: 0068 Process swapper (pid: 0, ti=c0336000 task=c030d3a0 task.ti=c0336000) Stack: c23ed140 00000000 f89ea2d8 c23ed140 c0389b00 f89e98a2 00000100 c0128a66 00000000 c010613e c01465a2 c01082ee c0337f4c c0337f4c 00000021 c032ff48 0000000a c012538a 00000046 00000000 c0336008 00000008 c0125433 00000000 Call Trace: [<f89ea2d8>] destroy_conntrack+0x11e/0x127 [nf_conntrack] [<f89e98a2>] death_by_timeout+0x7f/0x81 [nf_conntrack] [<c0128a66>] run_timer_softirq+0x107/0x170 [<c010613e>] timer_interrupt+0x65/0x6b [<c01465a2>] handle_IRQ_event+0x23/0x51 [<c01082ee>] sched_clock+0x3f/0x59 [<c012538a>] __do_softirq+0x66/0xcc [<c0125433>] do_softirq+0x43/0x51 [<c0113b95>] smp_apic_timer_interrupt+0x74/0x7f [<c0103800>] apic_timer_interrupt+0x28/0x30 [<c0101240>] mwait_idle_with_hints+0x3b/0x3f [<c01013af>] cpu_idle+0xb0/0xc9 [<c033b7b1>] start_kernel+0x3f7/0x3ff [<c033b1b8>] unknown_bootoption+0x0/0x202 ======================= Code: 74 19 8b 43 68 f6 c4 02 75 11 89 d9 ba 04 00 00 00 b8 e4 6e 9f f8 e8 10 22 74 c7 f0 0f ba 6b 68 09 85 f6 74 11 8b 06 85 c0 74 0b <8b> 50 6c 85 d2 74 04 89 d8 ff d2 0f b7 43 52 ba 40 66 9f f8 66 EIP: [<f89ea20c>] destroy_conntrack+0x52/0x127 [nf_conntrack] SS:ESP 0068:c0337f1c <0>Kernel panic - not syncing: Fatal exception in interrupt BUG: at arch/i386/kernel/smp.c:547 smp_call_function() [<c01118de>] smp_call_function+0x66/0x10b [<c0121778>] printk+0x1b/0x1f [<c011199e>] smp_send_stop+0x1b/0x36 [<c0120d2b>] panic+0x54/0xf5 [<c01041dc>] die+0x205/0x239 [<c0119363>] do_page_fault+0x45e/0x53b [<c0118f05>] do_page_fault+0x0/0x53b [<c02999ac>] error_code+0x7c/0x84 [<f89e9823>] death_by_timeout+0x0/0x81 [nf_conntrack] [<f89ea20c>] destroy_conntrack+0x52/0x127 [nf_conntrack] [<f89ea2d8>] destroy_conntrack+0x11e/0x127 [nf_conntrack] [<f89e98a2>] death_by_timeout+0x7f/0x81 [nf_conntrack] [<c0128a66>] run_timer_softirq+0x107/0x170 [<c010613e>] timer_interrupt+0x65/0x6b [<c01465a2>] handle_IRQ_event+0x23/0x51 [<c01082ee>] sched_clock+0x3f/0x59 [<c012538a>] __do_softirq+0x66/0xcc [<c0125433>] do_softirq+0x43/0x51 [<c0113b95>] smp_apic_timer_interrupt+0x74/0x7f [<c0103800>] apic_timer_interrupt+0x28/0x30 [<c0101240>] mwait_idle_with_hints+0x3b/0x3f [<c01013af>] cpu_idle+0xb0/0xc9 [<c033b7b1>] start_kernel+0x3f7/0x3ff [<c033b1b8>] unknown_bootoption+0x0/0x202 ======================= > > [...] > > > > [7.] A small shell script or example program which triggers the > > problem (if possible) > > > > after booting with init=/bin/sh (clean environment) > > > > <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< > > #!/bin/sh -x > > > > ifconfig eth0 <ip> netmask <netmask> > > > > sleep 5 > > > > modprobe nf_conntrack_netbios_ns > > > > sleep 3 > > > > iptables -F > > iptables -P INPUT DROP > > iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT > > iptables -P OUTPUT ACCEPT > > > > sleep 3 > > > > nmblookup <existing_netbios_name> > > cat /proc/net/ip_conntrack > > > > sleep 3 > > > > rmmod nf_conntrack_netbios_ns > > > > watch -n 1 cat /proc/net/ip_conntrack > > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > > > > [8.] Environment > > [8.1.] Software (add the output of the ver_linux script here) > > > > If some fields are empty or look unusual you may have an old version. > > Compare to the current minimal requirements in Documentation/Changes. > > > > Linux duplo 2.6.20-1-686 #1 SMP Tue Apr 24 21:52:11 UTC 2007 i686 GNU/Linux > > > > Gnu C 4.1.3 > > Gnu make 3.81 > > binutils Binutils > > util-linux 2.12r > > mount 2.12r > > module-init-tools 3.3-pre2 > > e2fsprogs 1.40-WIP > > Linux C Library > libc.2.5 > > Dynamic linker (ldd) 2.5 > > Procps 3.2.7 > > Net-tools 1.60 > > Kbd 85: > > Sh-utils 5.97 > > udev 105 > > Modules Loaded nf_conntrack_ipv4 xt_state iptable_filter ip_tables x_tables nf_conntrack_netbios_ns nf_conntrack nfnetlink ext3 jbd mbcache dm_mirror dm_snapshot dm_mod raid10 raid456 xor raid1 raid0 multipath linear md_mod ide_cd cdrom sd_mod ata_generic usbhid hid ata_piix libata scsi_mod piix floppy ehci_hcd uhci_hcd generic ide_core e1000 usbcore thermal processor fan > > > > [8.2.] Processor information (from /proc/cpuinfo): > > > > processor : 0 > > vendor_id : GenuineIntel > > cpu family : 6 > > model : 15 > > model name : Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz > > stepping : 6 > > cpu MHz : 2128.070 > > cache size : 2048 KB > > physical id : 0 > > siblings : 2 > > core id : 0 > > cpu cores : 2 > > fdiv_bug : no > > hlt_bug : no > > f00f_bug : no > > coma_bug : no > > fpu : yes > > fpu_exception : yes > > cpuid level : 10 > > wp : yes > > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm > > bogomips : 4259.22 > > clflush size : 64 > > > > processor : 1 > > vendor_id : GenuineIntel > > cpu family : 6 > > model : 15 > > model name : Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz > > stepping : 6 > > cpu MHz : 2128.070 > > cache size : 2048 KB > > physical id : 0 > > siblings : 2 > > core id : 1 > > cpu cores : 2 > > fdiv_bug : no > > hlt_bug : no > > f00f_bug : no > > coma_bug : no > > fpu : yes > > fpu_exception : yes > > cpuid level : 10 > > wp : yes > > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm > > bogomips : 4256.21 > > clflush size : 64 > > > > [8.3.] Module information (from /proc/modules): > > > > Module Size Used by > > nf_conntrack_ipv4 17772 1 > > xt_state 2560 1 > > iptable_filter 3072 1 > > ip_tables 12324 1 iptable_filter > > x_tables 14628 2 xt_state,ip_tables > > nf_conntrack_netbios_ns 3168 0 > > nf_conntrack 58440 3 nf_conntrack_ipv4,xt_state,nf_conntrack_netbios_ns > > nfnetlink 6648 2 nf_conntrack_ipv4,nf_conntrack > > ext3 121032 1 > > jbd 55368 1 ext3 > > mbcache 8420 1 ext3 > > dm_mirror 20340 0 > > dm_snapshot 16580 0 > > dm_mod 52812 2 dm_mirror,dm_snapshot > > raid10 22656 0 > > raid456 119568 0 > > xor 14504 1 raid456 > > raid1 22144 0 > > raid0 8096 0 > > multipath 8576 0 > > linear 5984 0 > > md_mod 71860 6 raid10,raid456,raid1,raid0,multipath,linear > > ide_cd 36672 0 > > cdrom 32960 1 ide_cd > > sd_mod 19968 2 > > ata_generic 7876 0 > > usbhid 23136 0 > > hid 22784 1 usbhid > > ata_piix 13860 1 > > libata 100052 2 ata_generic,ata_piix > > scsi_mod 133100 2 sd_mod,libata > > piix 9540 0 [permanent] > > floppy 54468 0 > > ehci_hcd 29132 0 > > uhci_hcd 22160 0 > > generic 4932 0 [permanent] > > ide_core 114728 3 ide_cd,piix,generic > > e1000 113376 0 > > usbcore 122312 4 usbhid,ehci_hcd,uhci_hcd > > thermal 13928 0 > > processor 30536 1 thermal > > fan 4772 0 > > > > [8.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) > > > > /proc/ioports: > > > > 0000-001f : dma1 > > 0020-0021 : pic1 > > 0040-0043 : timer0 > > 0050-0053 : timer1 > > 0060-006f : keyboard > > 0080-008f : dma page reg > > 00a0-00a1 : pic2 > > 00c0-00df : dma2 > > 00f0-00ff : fpu > > 0170-0177 : 0000:00:1f.1 > > 01f0-01f7 : 0000:00:1f.1 > > 01f0-01f7 : ide0 > > 0290-0297 : pnp 00:08 > > 0376-0376 : 0000:00:1f.1 > > 03c0-03df : vga+ > > 03f2-03f5 : floppy > > 03f6-03f6 : 0000:00:1f.1 > > 03f6-03f6 : ide0 > > 03f7-03f7 : floppy DIR > > 03f8-03ff : serial > > 0400-041f : 0000:00:1f.3 > > 0410-0415 : ACPI CPU throttle > > 0480-04bf : 0000:00:1f.0 > > 0800-087f : 0000:00:1f.0 > > 0800-0803 : ACPI PM1a_EVT_BLK > > 0804-0805 : ACPI PM1a_CNT_BLK > > 0808-080b : ACPI PM_TMR > > 0820-0820 : ACPI PM2_CNT_BLK > > 0828-082f : ACPI GPE0_BLK > > 0cf8-0cff : PCI conf1 > > 8000-801f : 0000:00:1d.0 > > 8000-801f : uhci_hcd > > 8400-841f : 0000:00:1d.1 > > 8400-841f : uhci_hcd > > 8800-881f : 0000:00:1d.2 > > 8800-881f : uhci_hcd > > 9000-901f : 0000:00:1d.3 > > 9000-901f : uhci_hcd > > 9400-940f : 0000:00:1f.2 > > 9400-940f : libata > > 9800-9803 : 0000:00:1f.2 > > 9800-9803 : libata > > a000-a007 : 0000:00:1f.2 > > a000-a007 : libata > > a400-a403 : 0000:00:1f.2 > > a400-a403 : libata > > a800-a807 : 0000:00:1f.2 > > a800-a807 : libata > > b000-bfff : PCI Bus #01 > > c000-cfff : PCI Bus #02 > > c800-c81f : 0000:02:00.0 > > c800-c81f : e1000 > > d000-dfff : PCI Bus #03 > > e000-efff : PCI Bus #04 > > ffa0-ffaf : 0000:00:1f.1 > > ffa0-ffa7 : ide0 > > ffa8-ffaf : ide1 > > > > iomem: > > > > 00000000-0009fbff : System RAM > > 00000000-00000000 : Crash kernel > > 0009fc00-0009ffff : reserved > > 000a0000-000bffff : Video RAM area > > 000c0000-000cefff : Video ROM > > 000f0000-000fffff : System ROM > > 00100000-7ff9ffff : System RAM > > 00100000-0029a5e4 : Kernel code > > 0029a5e5-003353b3 : Kernel data > > 7ffa0000-7ffadfff : ACPI Tables > > 7ffae000-7ffdffff : ACPI Non-volatile Storage > > 7ffe0000-7fffffff : reserved > > cddf8000-cddfbfff : 0000:00:1b.0 > > cddffc00-cddfffff : 0000:00:1d.7 > > cddffc00-cddfffff : ehci_hcd > > cde00000-cdefffff : PCI Bus #02 > > cdee0000-cdefffff : 0000:02:00.0 > > cdee0000-cdefffff : e1000 > > cdf00000-cfffffff : PCI Bus #04 > > cdfe0000-cdffffff : 0000:04:00.0 > > ce000000-ceffffff : 0000:04:00.0 > > cf000000-cfffffff : 0000:04:00.0 > > d0000000-dfffffff : PCI Bus #04 > > d0000000-dfffffff : 0000:04:00.0 > > ffb80000-ffffffff : reserved > > > > [8.5.] PCI information ('lspci -vvv' as root) > > > > 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) > > Subsystem: ASUSTeK Computer Inc. Unknown device 817a > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- > > Latency: 0 > > Capabilities: [e0] Vendor Specific Information > > > > 00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02) (prog-if 00 [Normal decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0, Cache Line Size: 16 bytes > > Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 > > I/O behind bridge: 0000e000-0000efff > > Memory behind bridge: cdf00000-cfffffff > > Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff > > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- > > BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- > > Capabilities: [88] Subsystem: Intel Corporation Unknown device 0000 > > Capabilities: [80] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ > > Address: fee0300c Data: 41b9 > > Capabilities: [a0] Express Root Port (Slot+) IRQ 0 > > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- > > Device: Latency L0s <64ns, L1 <1us > > Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ > > Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > > Device: MaxPayload 128 bytes, MaxReadReq 128 bytes > > Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 2 > > Link: Latency L0s <256ns, L1 <4us > > Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- > > Link: Speed 2.5Gb/s, Width x16 > > Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- > > Slot: Number 0, PowerLimit 75.000000 > > Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- > > Slot: AttnInd Off, PwrInd On, Power- > > Root: Correctable- Non-Fatal- Fatal- PME- > > > > 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) > > Subsystem: ASUSTeK Computer Inc. Unknown device 8237 > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0, Cache Line Size: 16 bytes > > Interrupt: pin A routed to IRQ 5 > > Region 0: Memory at cddf8000 (64-bit, non-prefetchable) [size=16K] > > Capabilities: [50] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- > > Address: 0000000000000000 Data: 0000 > > Capabilities: [70] Express Unknown type IRQ 0 > > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- > > Device: Latency L0s <64ns, L1 <1us > > Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- > > Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > > Device: MaxPayload 128 bytes, MaxReadReq 128 bytes > > Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0 > > Link: Latency L0s <64ns, L1 <1us > > Link: ASPM Disabled CommClk- ExtSynch- > > Link: Speed unknown, Width x0 > > > > 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0, Cache Line Size: 16 bytes > > Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 > > I/O behind bridge: 0000d000-0000dfff > > Memory behind bridge: fff00000-000fffff > > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- > > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > > Capabilities: [40] Express Root Port (Slot+) IRQ 0 > > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- > > Device: Latency L0s unlimited, L1 unlimited > > Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ > > Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > > Device: MaxPayload 128 bytes, MaxReadReq 128 bytes > > Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1 > > Link: Latency L0s <256ns, L1 <4us > > Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- > > Link: Speed 2.5Gb/s, Width x0 > > Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ > > Slot: Number 1, PowerLimit 10.000000 > > Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- > > Slot: AttnInd Unknown, PwrInd Unknown, Power- > > Root: Correctable- Non-Fatal- Fatal- PME- > > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ > > Address: fee0300c Data: 41c1 > > Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Unknown device 8179 > > Capabilities: [a0] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > > > 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) (prog-if 00 [Normal decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0, Cache Line Size: 16 bytes > > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > > I/O behind bridge: 0000c000-0000cfff > > Memory behind bridge: cde00000-cdefffff > > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- > > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > > Capabilities: [40] Express Root Port (Slot-) IRQ 0 > > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- > > Device: Latency L0s unlimited, L1 unlimited > > Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ > > Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > > Device: MaxPayload 128 bytes, MaxReadReq 128 bytes > > Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2 > > Link: Latency L0s <256ns, L1 <4us > > Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- > > Link: Speed 2.5Gb/s, Width x1 > > Root: Correctable- Non-Fatal- Fatal- PME- > > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ > > Address: fee0300c Data: 41c9 > > Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Unknown device 8179 > > Capabilities: [a0] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > > > 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) (prog-if 00 [UHCI]) > > Subsystem: ASUSTeK Computer Inc. Unknown device 8179 > > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0 > > Interrupt: pin A routed to IRQ 18 > > Region 4: I/O ports at 8000 [size=32] > > > > 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) (prog-if 00 [UHCI]) > > Subsystem: ASUSTeK Computer Inc. Unknown device 8179 > > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0 > > Interrupt: pin B routed to IRQ 17 > > Region 4: I/O ports at 8400 [size=32] > > > > 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) (prog-if 00 [UHCI]) > > Subsystem: ASUSTeK Computer Inc. Unknown device 8179 > > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0 > > Interrupt: pin C routed to IRQ 19 > > Region 4: I/O ports at 8800 [size=32] > > > > 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) (prog-if 00 [UHCI]) > > Subsystem: ASUSTeK Computer Inc. Unknown device 8179 > > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0 > > Interrupt: pin D routed to IRQ 20 > > Region 4: I/O ports at 9000 [size=32] > > > > 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) > > Subsystem: ASUSTeK Computer Inc. Unknown device 8179 > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0 > > Interrupt: pin A routed to IRQ 18 > > Region 0: Memory at cddffc00 (32-bit, non-prefetchable) [size=1K] > > Capabilities: [50] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > Capabilities: [58] Debug port > > > > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0 > > Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 > > I/O behind bridge: 0000b000-0000bfff > > Memory behind bridge: fff00000-000fffff > > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > > Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Unknown device 8179 > > > > 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) > > Subsystem: ASUSTeK Computer Inc. Unknown device 8179 > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0 > > Capabilities: [e0] Vendor Specific Information > > > > 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP]) > > Subsystem: ASUSTeK Computer Inc. Unknown device 8179 > > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0 > > Interrupt: pin A routed to IRQ 19 > > Region 0: I/O ports at 01f0 [size=8] > > Region 1: I/O ports at 03f4 [size=1] > > Region 2: I/O ports at 0170 [size=8] > > Region 3: I/O ports at 0374 [size=1] > > Region 4: I/O ports at ffa0 [size=16] > > > > 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) > > Subsystem: ASUSTeK Computer Inc. Unknown device 2601 > > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0 > > Interrupt: pin B routed to IRQ 17 > > Region 0: I/O ports at a800 [size=8] > > Region 1: I/O ports at a400 [size=4] > > Region 2: I/O ports at a000 [size=8] > > Region 3: I/O ports at 9800 [size=4] > > Region 4: I/O ports at 9400 [size=16] > > Capabilities: [70] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > > > 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) > > Subsystem: ASUSTeK Computer Inc. Unknown device 8179 > > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Interrupt: pin B routed to IRQ 0 > > Region 4: I/O ports at 0400 [size=32] > > > > 02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller > > Subsystem: ASUSTeK Computer Inc. Unknown device 81c2 > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0, Cache Line Size: 64 bytes > > Interrupt: pin A routed to IRQ 220 > > Region 0: Memory at cdee0000 (32-bit, non-prefetchable) [size=128K] > > Region 2: I/O ports at c800 [size=32] > > Capabilities: [c8] Power Management version 2 > > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > > Status: D0 PME-Enable- DSel=0 DScale=1 PME- > > Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ > > Address: 00000000fee0300c Data: 41e9 > > Capabilities: [e0] Express Endpoint IRQ 0 > > Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- > > Device: Latency L0s <512ns, L1 <64us > > Device: AtnBtn- AtnInd- PwrInd- > > Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- > > Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > > Device: MaxPayload 128 bytes, MaxReadReq 512 bytes > > Link: Supported Speed 2.5Gb/s, Width x1, ASPM unknown, Port 0 > > Link: Latency L0s <128ns, L1 <64us > > Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- > > Link: Speed 2.5Gb/s, Width x1 > > > > 04:00.0 VGA compatible controller: nVidia Corporation GeForce 7300 GS (rev a1) (prog-if 00 [VGA]) > > Subsystem: ASUSTeK Computer Inc. Unknown device 81f1 > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0, Cache Line Size: 16 bytes > > Interrupt: pin A routed to IRQ 11 > > Region 0: Memory at cf000000 (32-bit, non-prefetchable) [size=16M] > > Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] > > Region 3: Memory at ce000000 (64-bit, non-prefetchable) [size=16M] > > Expansion ROM at cdfe0000 [disabled] [size=128K] > > Capabilities: [60] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- > > Address: 0000000000000000 Data: 0000 > > Capabilities: [78] Express Endpoint IRQ 0 > > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- > > Device: Latency L0s <256ns, L1 <4us > > Device: AtnBtn- AtnInd- PwrInd- > > Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- > > Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > > Device: MaxPayload 128 bytes, MaxReadReq 512 bytes > > Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0 > > Link: Latency L0s <256ns, L1 <4us > > Link: ASPM Disabled RCB 128 bytes CommClk+ ExtSynch- > > Link: Speed 2.5Gb/s, Width x16 > > > > [8.6.] SCSI information (from /proc/scsi/scsi) > > > > (SATA) > > > > Attached devices: > > Host: scsi0 Channel: 00 Id: 00 Lun: 00 > > Vendor: ATA Model: SAMSUNG HD080HJ Rev: ZH10 > > Type: Direct-Access ANSI SCSI revision: 05 > > Host: scsi1 Channel: 00 Id: 00 Lun: 00 > > Vendor: ATA Model: SAMSUNG HD080HJ Rev: ZH10 > > Type: Direct-Access ANSI SCSI revision: 05 > > ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: kernel oops after unloading nf_conntrack_netbios_ns_module 2007-05-10 11:01 ` Gabor Burjan @ 2007-05-12 15:05 ` Patrick McHardy 2007-05-14 7:16 ` Gabor Burjan 0 siblings, 1 reply; 5+ messages in thread From: Patrick McHardy @ 2007-05-12 15:05 UTC (permalink / raw) To: Gabor Burjan; +Cc: Andrew Morton, linux-kernel, netdev [-- Attachment #1: Type: text/plain, Size: 375 bytes --] Gabor Burjan wrote: > EIP is at destroy_conntrack+0x52/0x127 [nf_conntrack] > >>>nmblookup <existing_netbios_name> >>>cat /proc/net/ip_conntrack >>> >>>sleep 3 >>> >>>rmmod nf_conntrack_netbios_ns Thanks for the report and good testcase, the crash can only happen with a sleep of >= 3s after the last nmblookup packet was sent. Can you try if this patch fixes it please? [-- Attachment #2: x --] [-- Type: text/plain, Size: 2517 bytes --] [NETFILTER]: nf_conntrack: fix use-after-free in helper destroy callback When the helper module is removed for a master connection that has a fulfilled expectation, but has already timed out and got removed from the hash tables, nf_conntrack_helper_unregister can't find the master connection to unset the helper, causing a use-after-free when the expected connection is destroyed and releases the last reference to the master. The helper destroy callback was introduced for the PPtP helper to clean up expectations and expected connections when the master connection times out, but doing this from the destroy_conntrack only works for unfulfilled expectations since expected connections hold a reference to the master and it is not destroyed. Move the destroy callback to the timeout function, which fixes both problems. Signed-off-by: Patrick McHardy <kaber@trash.net> --- commit 50d2ab6c1353c32b994e6171b231fc771d0a2b73 tree 9b2cd5659dad0b452e59fff4869f7d9db780fd02 parent 6b99a1744ab187073bca84a9fd3ccbf091865ca6 author Patrick McHardy <kaber@trash.net> Sat, 12 May 2007 16:59:07 +0200 committer Patrick McHardy <kaber@trash.net> Sat, 12 May 2007 17:00:18 +0200 net/netfilter/nf_conntrack_core.c | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-) diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index cb29ba7..0975fee 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -315,7 +315,6 @@ static void destroy_conntrack(struct nf_conntrack *nfct) { struct nf_conn *ct = (struct nf_conn *)nfct; - struct nf_conn_help *help = nfct_help(ct); struct nf_conntrack_l3proto *l3proto; struct nf_conntrack_l4proto *l4proto; @@ -326,9 +325,6 @@ destroy_conntrack(struct nf_conntrack *nfct) nf_conntrack_event(IPCT_DESTROY, ct); set_bit(IPS_DYING_BIT, &ct->status); - if (help && help->helper && help->helper->destroy) - help->helper->destroy(ct); - /* To make sure we don't get any weird locking issues here: * destroy_conntrack() MUST NOT be called with a write lock * to nf_conntrack_lock!!! -HW */ @@ -369,6 +365,10 @@ destroy_conntrack(struct nf_conntrack *nfct) static void death_by_timeout(unsigned long ul_conntrack) { struct nf_conn *ct = (void *)ul_conntrack; + struct nf_conn_help *help = nfct_help(ct); + + if (help && help->helper && help->helper->destroy) + help->helper->destroy(ct); write_lock_bh(&nf_conntrack_lock); /* Inside lock so preempt is disabled on module removal path. ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: kernel oops after unloading nf_conntrack_netbios_ns_module 2007-05-12 15:05 ` Patrick McHardy @ 2007-05-14 7:16 ` Gabor Burjan 2007-05-14 22:14 ` Andrew Morton 0 siblings, 1 reply; 5+ messages in thread From: Gabor Burjan @ 2007-05-14 7:16 UTC (permalink / raw) To: Patrick McHardy; +Cc: Andrew Morton, linux-kernel, netdev On Sat, May 12, 2007 at 05:05:51PM +0200, Patrick McHardy wrote: > Gabor Burjan wrote: > > EIP is at destroy_conntrack+0x52/0x127 [nf_conntrack] > > > >>>nmblookup <existing_netbios_name> > >>>cat /proc/net/ip_conntrack > >>> > >>>sleep 3 > >>> > >>>rmmod nf_conntrack_netbios_ns > > Thanks for the report and good testcase, the crash can only happen with > a sleep of >= 3s after the last nmblookup packet was sent. > > Can you try if this patch fixes it please? Yes, it fixes the problem. Thank you, Gabor ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: kernel oops after unloading nf_conntrack_netbios_ns_module 2007-05-14 7:16 ` Gabor Burjan @ 2007-05-14 22:14 ` Andrew Morton 0 siblings, 0 replies; 5+ messages in thread From: Andrew Morton @ 2007-05-14 22:14 UTC (permalink / raw) To: Gabor Burjan; +Cc: Patrick McHardy, linux-kernel, netdev On Mon, 14 May 2007 09:16:11 +0200 Gabor Burjan <buga@buvoshetes.hu> wrote: > On Sat, May 12, 2007 at 05:05:51PM +0200, Patrick McHardy wrote: > > Gabor Burjan wrote: > > > EIP is at destroy_conntrack+0x52/0x127 [nf_conntrack] > > > > > >>>nmblookup <existing_netbios_name> > > >>>cat /proc/net/ip_conntrack > > >>> > > >>>sleep 3 > > >>> > > >>>rmmod nf_conntrack_netbios_ns > > > > Thanks for the report and good testcase, the crash can only happen with > > a sleep of >= 3s after the last nmblookup packet was sent. > > > > Can you try if this patch fixes it please? > > Yes, it fixes the problem. Just speaking generally, rather than about this particualr patch... Gabor did quite an amount of valuable work here: tested a 2.6.20.x kernel, developed a test case for reproducing the bug, reported it all quite exhaustively, tested the resulting patch. The least we can do in return is to put a big fat "thanks" in the changelog when the fix gets merged. > Thank you, No - thank _you_. ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2007-05-14 22:15 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20070510090603.GA13059@odin.sis.hu>
2007-05-10 10:34 ` kernel oops after unloading nf_conntrack_netbios_ns_module Andrew Morton
2007-05-10 11:01 ` Gabor Burjan
2007-05-12 15:05 ` Patrick McHardy
2007-05-14 7:16 ` Gabor Burjan
2007-05-14 22:14 ` Andrew Morton
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).