From: Ralf Baechle <ralf@linux-mips.org>
To: Andrew Morton <akpm@linux-foundation.org>,
Jeff Garzik <jeff@garzik.org>,
netdev@vger.kernel.org, linux-mips@linux-mips.org,
Shane McDonald <Shane_McDonald@pmc-sierra.com>
Subject: [NET] meth driver renovation
Date: Thu, 24 May 2007 12:54:04 +0100 [thread overview]
Message-ID: <20070524115404.GC27073@linux-mips.org> (raw)
The meth ethernet driver for the SGI IP32 aka O2 is so far still an old
style driver which does not use the device driver model. This is now
causing issues with some udev based gadgetry in debian-stable. Fixed by
converting the meth driver to a platform device.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
--
Fixes since previous patch:
o Fixed typo in meth_exit_module()
diff --git a/arch/mips/sgi-ip32/Makefile b/arch/mips/sgi-ip32/Makefile
index 7e14167..60f0227 100644
--- a/arch/mips/sgi-ip32/Makefile
+++ b/arch/mips/sgi-ip32/Makefile
@@ -3,5 +3,5 @@
# under Linux.
#
-obj-y += ip32-berr.o ip32-irq.o ip32-setup.o ip32-reset.o \
+obj-y += ip32-berr.o ip32-irq.o ip32-platform.o ip32-setup.o ip32-reset.o \
crime.o ip32-memory.o
diff --git a/arch/mips/sgi-ip32/ip32-platform.c b/arch/mips/sgi-ip32/ip32-platform.c
new file mode 100644
index 0000000..120b159
--- /dev/null
+++ b/arch/mips/sgi-ip32/ip32-platform.c
@@ -0,0 +1,20 @@
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+static __init int meth_devinit(void)
+{
+ struct platform_device *pd;
+ int ret;
+
+ pd = platform_device_alloc("meth", -1);
+ if (!pd)
+ return -ENOMEM;
+
+ ret = platform_device_add(pd);
+ if (ret)
+ platform_device_put(pd);
+
+ return ret;
+}
+
+device_initcall(meth_devinit);
diff --git a/drivers/net/meth.c b/drivers/net/meth.c
index 0343ea1..92b403b 100644
--- a/drivers/net/meth.c
+++ b/drivers/net/meth.c
@@ -8,15 +8,16 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <linux/kernel.h> /* printk() */
#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <linux/errno.h> /* error codes */
-#include <linux/types.h> /* size_t */
-#include <linux/interrupt.h> /* mark_bh */
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
#include <linux/in.h>
#include <linux/in6.h>
@@ -33,7 +34,6 @@
#include <asm/io.h>
#include <asm/scatterlist.h>
-#include <linux/dma-mapping.h>
#include "meth.h"
@@ -51,8 +51,6 @@
static const char *meth_str="SGI O2 Fast Ethernet";
-MODULE_AUTHOR("Ilya Volynets <ilya@theIlya.com>");
-MODULE_DESCRIPTION("SGI O2 Builtin Fast Ethernet driver");
#define HAVE_TX_TIMEOUT
/* The maximum time waited (in jiffies) before assuming a Tx failed. (400ms) */
@@ -784,15 +782,15 @@ static struct net_device_stats *meth_stats(struct net_device *dev)
/*
* The init function.
*/
-static struct net_device *meth_init(void)
+static int __init meth_probe(struct platform_device *pdev)
{
struct net_device *dev;
struct meth_private *priv;
- int ret;
+ int err;
dev = alloc_etherdev(sizeof(struct meth_private));
if (!dev)
- return ERR_PTR(-ENOMEM);
+ return -ENOMEM;
dev->open = meth_open;
dev->stop = meth_release;
@@ -808,11 +806,12 @@ static struct net_device *meth_init(void)
priv = netdev_priv(dev);
spin_lock_init(&priv->meth_lock);
+ SET_NETDEV_DEV(dev, &pdev->dev);
- ret = register_netdev(dev);
- if (ret) {
+ err = register_netdev(dev);
+ if (err) {
free_netdev(dev);
- return ERR_PTR(ret);
+ return err;
}
printk(KERN_INFO "%s: SGI MACE Ethernet rev. %d\n",
@@ -820,21 +819,44 @@ static struct net_device *meth_init(void)
return 0;
}
-static struct net_device *meth_dev;
+static int __exit meth_remove(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+
+ unregister_netdev(dev);
+ free_netdev(dev);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver meth_driver = {
+ .probe = meth_probe,
+ .remove = __devexit_p(meth_remove),
+ .driver = {
+ .name = "meth",
+ }
+};
static int __init meth_init_module(void)
{
- meth_dev = meth_init();
- if (IS_ERR(meth_dev))
- return PTR_ERR(meth_dev);
- return 0;
+ int err;
+
+ err = platform_driver_register(&meth_driver);
+ if (err)
+ printk(KERN_ERR "Driver registration failed\n");
+
+ return err;
}
static void __exit meth_exit_module(void)
{
- unregister_netdev(meth_dev);
- free_netdev(meth_dev);
+ platform_driver_unregister(&meth_driver);
}
module_init(meth_init_module);
module_exit(meth_exit_module);
+
+MODULE_AUTHOR("Ilya Volynets <ilya@theIlya.com>");
+MODULE_DESCRIPTION("SGI O2 Builtin Fast Ethernet driver");
+MODULE_LICENSE("GPL");
next reply other threads:[~2007-05-24 11:54 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-24 11:54 Ralf Baechle [this message]
2007-05-24 21:21 ` [NET] meth driver renovation Jeff Garzik
-- strict thread matches above, loose matches on Subject: below --
2007-05-23 20:02 Shane McDonald
2007-05-24 11:51 ` Ralf Baechle
2007-05-23 8:43 Ralf Baechle
2007-05-23 8:44 ` Ralf Baechle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070524115404.GC27073@linux-mips.org \
--to=ralf@linux-mips.org \
--cc=Shane_McDonald@pmc-sierra.com \
--cc=akpm@linux-foundation.org \
--cc=jeff@garzik.org \
--cc=linux-mips@linux-mips.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).