netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Pavel Machek <pavel@ucw.cz>
To: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: linux-pm <linux-pm@lists.osdl.org>,
	netdev@vger.kernel.org, Valerie Henson <val@nmt.edu>,
	Nigel Cunningham <nigel@nigel.suspend2.net>,
	Peer Chen <peer.chen@uli.com.tw>
Subject: Re: [RFC][PATCH] Add suspend and resume support to uli526x
Date: Mon, 4 Jun 2007 13:11:12 +0200	[thread overview]
Message-ID: <20070604111112.GP4363@elf.ucw.cz> (raw)
In-Reply-To: <200706031237.36773.rjw@sisk.pl>

Hi!

> From: Rafael J. Wysocki <rjw@sisk.pl>
> 
> Add suspend/resume support to the uli526x network driver (tested on x86_64,
> with 'Ethernet controller: ALi Corporation M5263 Ethernet Controller, rev 40').
> 
> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

Looks ok to me.

> +#ifdef CONFIG_PM
> +
> +/*
> + *	Suspend the interface.
> + */
> +
> +static int uli526x_suspend(struct pci_dev *pdev, pm_message_t state)
> +{
> +	struct net_device *dev = pci_get_drvdata(pdev);
> +
> +	ULI526X_DBUG(0, "uli526x_suspend", 0);
> +
> +	if (dev && netdev_priv(dev)) {
> +		if (netif_running(dev)) {
> +			netif_device_detach(dev);
> +			uli526x_down(dev);
> +		}
> +		pci_save_state(pdev);
> +		pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
> +		pci_disable_device(pdev);
> +		pci_set_power_state(pdev, pci_choose_state(pdev, state));
> +	}
> +	return 0;
> +}
> +
> +/*
> + *	Resume the interface.
> + */
> +
> +static int uli526x_resume(struct pci_dev *pdev)
> +{
> +	struct net_device *dev = pci_get_drvdata(pdev);
> +	struct uli526x_board_info *db = netdev_priv(dev);
> +	int err;
> +
> +	ULI526X_DBUG(0, "uli526x_resume", 0);
> +
> +	if (dev && db) {
> +		pci_set_power_state(pdev, PCI_D0);
> +		err = pci_enable_device(pdev);
> +		if (err) {
> +			printk(KERN_WARNING "%s: Could not enable device \n",
> +				dev->name);
> +			return err;
> +		}
> +		pci_restore_state(pdev);
> +		pci_set_master(pdev);
> +		if (netif_running(dev)) {
> +			uli526x_up(dev);
> +			netif_device_attach(dev);
> +		}
> +	}
> +	return 0;
> +}
> +
#else 
#define *_resume NULL
#define *_suspend NULL

> +#endif /* CONFIG_PM */

> @@ -1689,6 +1775,10 @@ static struct pci_driver uli526x_driver 
>  	.id_table	= uli526x_pci_tbl,
>  	.probe		= uli526x_init_one,
>  	.remove		= __devexit_p(uli526x_remove_one),
> +#ifdef CONFIG_PM
> +	.suspend	= uli526x_suspend,
> +	.resume		= uli526x_resume,
> +#endif

...so that this ifdef is not needed?
								Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

  reply	other threads:[~2007-06-04 11:11 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-06-03 10:37 [RFC][PATCH] Add suspend and resume support to uli526x Rafael J. Wysocki
2007-06-04 11:11 ` Pavel Machek [this message]
2007-06-04 13:49   ` Rafael J. Wysocki
2007-06-04 21:16     ` Nigel Cunningham
2007-06-04 21:31       ` Rafael J. Wysocki
2007-06-04 22:41       ` Pavel Machek
2007-06-04 22:49         ` Nigel Cunningham
2007-06-04 22:53           ` Pavel Machek
2007-06-04 22:55             ` Nigel Cunningham
2007-06-05  5:56               ` Stephen Hemminger
2007-06-05  9:31                 ` Rafael J. Wysocki
2007-06-05  0:58 ` Valerie Henson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070604111112.GP4363@elf.ucw.cz \
    --to=pavel@ucw.cz \
    --cc=linux-pm@lists.osdl.org \
    --cc=netdev@vger.kernel.org \
    --cc=nigel@nigel.suspend2.net \
    --cc=peer.chen@uli.com.tw \
    --cc=rjw@sisk.pl \
    --cc=val@nmt.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).