From: Stephen Hemminger <shemminger@linux-foundation.org>
To: Pavel Emelianov <xemul@openvz.org>
Cc: Patrick McHardy <kaber@trash.net>,
"Eric W. Biederman" <ebiederm@xmission.com>,
Linux Netdev List <netdev@vger.kernel.org>,
Linux Containers <containers@lists.osdl.org>,
Kirill Korotaev <dev@openvz.org>
Subject: Re: [PATCH] Virtual ethernet tunnel
Date: Wed, 6 Jun 2007 09:17:17 -0700 [thread overview]
Message-ID: <20070606091717.4eb0cfdf@freepuppy> (raw)
In-Reply-To: <4666CEAA.8010903@openvz.org>
On Wed, 06 Jun 2007 19:11:38 +0400
Pavel Emelianov <xemul@openvz.org> wrote:
> Veth stands for Virtual ETHernet. It is a simple tunnel driver
> that works at the link layer and looks like a pair of ethernet
> devices interconnected with each other.
>
> Mainly it allows to communicate between network namespaces but
> it can be used as is as well.
>
> Eric recently sent a similar driver called etun. This
> implementation uses another interface - the RTM_NRELINK
> message introduced by Patric. The patch fits today netdev
> tree with Patrick's patches.
>
> The newlink callback is organized that way to make it easy
> to create the peer device in the separate namespace when we
> have them in kernel.
>
> The patch for an ip utility is also provided.
>
> Eric, since ethtool interface was from your patch, I add
> your Signed-off-by line.
>
> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
> Signed-off-by: Pavel Emelianov <xemul@openvz.org>
>
> ---
>
> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
> index 7d57f4a..7e144be 100644
> --- a/drivers/net/Kconfig
> +++ b/drivers/net/Kconfig
> @@ -119,6 +119,12 @@ config TUN
>
> If you don't know what to use this for, you don't need it.
>
> +config VETH
> + tristate "Virtual ethernet device"
> + ---help---
> + The device is an ethernet tunnel. Devices are created in pairs. When
> + one end receives the packet it appears on its pair and vice versa.
> +
> config NET_SB1000
> tristate "General Instruments Surfboard 1000"
> depends on PNP
> diff --git a/drivers/net/Makefile b/drivers/net/Makefile
> index a77affa..4764119 100644
> --- a/drivers/net/Makefile
> +++ b/drivers/net/Makefile
> @@ -185,6 +185,7 @@ obj-$(CONFIG_MACSONIC) += macsonic.o
> obj-$(CONFIG_MACMACE) += macmace.o
> obj-$(CONFIG_MAC89x0) += mac89x0.o
> obj-$(CONFIG_TUN) += tun.o
> +obj-$(CONFIG_VETH) += veth.o
> obj-$(CONFIG_NET_NETX) += netx-eth.o
> obj-$(CONFIG_DL2K) += dl2k.o
> obj-$(CONFIG_R8169) += r8169.o
> diff --git a/drivers/net/veth.c b/drivers/net/veth.c
> new file mode 100644
> index 0000000..6746c91
> --- /dev/null
> +++ b/drivers/net/veth.c
> @@ -0,0 +1,391 @@
> +/*
> + * drivers/net/veth.c
> + *
> + * Copyright (C) 2007 OpenVZ http://openvz.org, SWsoft Inc
> + *
> + */
> +
> +#include <linux/list.h>
> +#include <linux/netdevice.h>
> +#include <linux/ethtool.h>
> +#include <linux/etherdevice.h>
> +
> +#include <net/dst.h>
> +#include <net/xfrm.h>
> +#include <net/veth.h>
> +
> +#define DRV_NAME "veth"
> +#define DRV_VERSION "1.0"
> +
> +struct veth_priv {
> + struct net_device *peer;
> + struct net_device *dev;
> + struct list_head list;
> + struct net_device_stats stats;
> + unsigned ip_summed;
> +};
> +
> +static LIST_HEAD(veth_list);
> +
> +/*
> + * ethtool interface
> + */
> +
> +static struct {
> + const char string[ETH_GSTRING_LEN];
> +} ethtool_stats_keys[] = {
> + { "peer_ifindex" },
> +};
Seems like a good usage of sysfs attributes, rather than ethtool.
Then you can get rid of all the useless ethtool for what is
basically a virtual device.
> +/*
> + * xmit
> + */
> +
> +static int veth_xmit(struct sk_buff *skb, struct net_device *dev)
> +{
> + struct net_device *rcv = NULL;
> + struct veth_priv *priv, *rcv_priv;
> + int length;
> +
> + skb_orphan(skb);
> +
> + priv = netdev_priv(dev);
> + rcv = priv->peer;
> + rcv_priv = netdev_priv(rcv);
> +
> + if (!(rcv->flags & IFF_UP))
> + goto outf;
> +
> + skb->dev = rcv;
> + skb->pkt_type = PACKET_HOST;
> + skb->protocol = eth_type_trans(skb, rcv);
> + if (dev->features & NETIF_F_NO_CSUM)
> + skb->ip_summed = rcv_priv->ip_summed;
> +
> + dst_release(skb->dst);
> + skb->dst = NULL;
> +
> + secpath_reset(skb);
> + nf_reset(skb);
> +
> + length = skb->len;
> +
> + priv->stats.tx_bytes += length;
> + priv->stats.tx_packets++;
> +
> + rcv_priv->stats.rx_bytes += length;
> + rcv_priv->stats.rx_packets++;
Per-cpu stats? This will cacheline thrash.
> + netif_rx(skb);
> + return 0;
> +
> +outf:
> + kfree_skb(skb);
> + priv->stats.tx_dropped++;
> + return 0;
> +}
--
Stephen Hemminger <shemminger@linux-foundation.org>
next prev parent reply other threads:[~2007-06-06 16:29 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-06 15:11 [PATCH] Virtual ethernet tunnel Pavel Emelianov
2007-06-06 15:17 ` [PATCH] Module for ip utility to support veth device Pavel Emelianov
2007-06-06 15:18 ` Patrick McHardy
2007-06-06 15:28 ` [PATCH] Virtual ethernet tunnel Patrick McHardy
2007-06-07 8:09 ` Pavel Emelianov
2007-06-07 9:29 ` Daniel Lezcano
2007-06-07 9:51 ` Pavel Emelianov
2007-06-07 14:05 ` Daniel Lezcano
2007-06-07 14:23 ` Kirill Korotaev
2007-06-07 14:42 ` Daniel Lezcano
2007-06-07 15:33 ` Pavel Emelianov
2007-06-07 15:25 ` Pavel Emelianov
2007-06-07 15:44 ` Daniel Lezcano
2007-06-11 11:39 ` Patrick McHardy
2007-06-13 9:24 ` Pavel Emelianov
2007-06-13 11:12 ` Patrick McHardy
2007-06-13 16:02 ` Pavel Emelianov
2007-06-13 15:37 ` Patrick McHardy
2007-06-06 15:39 ` Patrick McHardy
2007-06-06 16:17 ` Stephen Hemminger [this message]
2007-06-06 19:47 ` David Miller
2007-06-06 20:38 ` [Devel] " Daniel Lezcano
2007-06-06 20:49 ` David Miller
2007-06-07 8:14 ` Kirill Korotaev
2007-06-07 9:07 ` David Miller
2007-06-07 9:30 ` Benjamin Thery
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070606091717.4eb0cfdf@freepuppy \
--to=shemminger@linux-foundation.org \
--cc=containers@lists.osdl.org \
--cc=dev@openvz.org \
--cc=ebiederm@xmission.com \
--cc=kaber@trash.net \
--cc=netdev@vger.kernel.org \
--cc=xemul@openvz.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).