From: Stephen Hemminger <shemminger@linux-foundation.org>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: netdev@vger.kernel.org
Subject: [PATCH 04/12] sky2: check for more work before leaving NAPI
Date: Mon, 09 Jul 2007 15:33:36 -0700 [thread overview]
Message-ID: <20070709223453.238106926@linux-foundation.org> (raw)
In-Reply-To: 20070709223332.966231494@linux-foundation.org
[-- Attachment #1: sky2-work-check.patch --]
[-- Type: text/plain, Size: 2034 bytes --]
This patch avoids generating another IRQ if more packets
arrive while in the NAPI poll routine. Before marking device as
finished, it rechecks that the status ring is empty.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
--- a/drivers/net/sky2.c 2007-07-09 15:30:09.000000000 -0700
+++ b/drivers/net/sky2.c 2007-07-09 15:30:10.000000000 -0700
@@ -2477,8 +2477,7 @@ static void sky2_err_intr(struct sky2_hw
static int sky2_poll(struct net_device *dev0, int *budget)
{
struct sky2_hw *hw = ((struct sky2_port *) netdev_priv(dev0))->hw;
- int work_limit = min(dev0->quota, *budget);
- int work_done = 0;
+ int work_done;
u32 status = sky2_read32(hw, B0_Y2_SP_EISR);
if (unlikely(status & Y2_IS_ERROR))
@@ -2490,25 +2489,25 @@ static int sky2_poll(struct net_device *
if (status & Y2_IS_IRQ_PHY2)
sky2_phy_intr(hw, 1);
- work_done = sky2_status_intr(hw, work_limit);
- if (work_done < work_limit) {
- /* Bug/Errata workaround?
- * Need to kick the TX irq moderation timer.
- */
- if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_START) {
- sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
- sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
- }
- netif_rx_complete(dev0);
+ work_done = sky2_status_intr(hw, min(dev0->quota, *budget));
+ *budget -= work_done;
+ dev0->quota -= work_done;
- /* end of interrupt, re-enables also acts as I/O synchronization */
- sky2_read32(hw, B0_Y2_SP_LISR);
- return 0;
- } else {
- *budget -= work_done;
- dev0->quota -= work_done;
+ /* More work? */
+ if (hw->st_idx != sky2_read16(hw, STAT_PUT_IDX))
return 1;
+
+ /* Bug/Errata workaround?
+ * Need to kick the TX irq moderation timer.
+ */
+ if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_START) {
+ sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
+ sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
}
+ netif_rx_complete(dev0);
+
+ sky2_read32(hw, B0_Y2_SP_LISR);
+ return 0;
}
static irqreturn_t sky2_intr(int irq, void *dev_id)
--
Stephen Hemminger <shemminger@linux-foundation.org>
next prev parent reply other threads:[~2007-07-09 22:36 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-09 22:33 [PATCH 00/12] sky2 driver updates for 2.6.23 Stephen Hemminger
2007-07-09 22:33 ` [PATCH 01/12] sky2: restore workarounds for lost interrupts Stephen Hemminger
2007-07-10 16:24 ` Jeff Garzik
2007-07-09 22:33 ` [PATCH 02/12] sky2: carrier management Stephen Hemminger
2007-07-09 22:33 ` [PATCH 03/12] sky2: debug interface Stephen Hemminger
2007-07-09 22:33 ` Stephen Hemminger [this message]
2007-07-09 22:33 ` [PATCH 05/12] sky2: receive fill Stephen Hemminger
2007-07-09 22:33 ` [PATCH 06/12] sky2: unmark as EXPERIMENTAL Stephen Hemminger
2007-07-09 22:33 ` [PATCH 07/12] sky2: add support for read/write of EEPROM Stephen Hemminger
2007-07-09 22:33 ` [PATCH 08/12] sky2: check drop truncated packets Stephen Hemminger
2007-07-09 22:33 ` [PATCH 09/12] sky2: use roundup() macro Stephen Hemminger
2007-07-09 22:33 ` [PATCH 10/12] sky2: use upper_32_bits() macro Stephen Hemminger
2007-07-09 22:33 ` [PATCH 11/12] sky2: remove some leftover debug messages Stephen Hemminger
2007-07-09 22:33 ` [PATCH 12/12] sky2: 1.16 version Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070709223453.238106926@linux-foundation.org \
--to=shemminger@linux-foundation.org \
--cc=jgarzik@pobox.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).