From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Tourrilhes Subject: [PATCH 2.6] SoftMAC : fix duplicate display of channel in scan Date: Tue, 10 Jul 2007 11:41:55 -0700 Message-ID: <20070710184155.GA6955@bougret.hpl.hp.com> Reply-To: jt-sDzT885Ts8HQT0dZR+AlfA@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii To: Larry Finger , Michael Buesch , linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Return-path: Content-Disposition: inline Sender: linux-wireless-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: netdev.vger.kernel.org Hi, SoftMAC output the channel twice in the scan output. It should display frequency and channel, but only once for each. -------------------------------------------------------- Cell 02 - Address: A2:00:04:XX:XX:XX ESSID:"TheESSID" Protocol:IEEE 802.11b Mode:Ad-Hoc -> Channel:5 -> Frequency:2.432 GHz (Channel 5) Encryption key:off Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s Quality=95/100 Signal level=-47 dBm Noise level=-65 dBm Extra: Last beacon: 120ms ago -------------------------------------------------------- The fix is simple, patch attached, tested for 2.6.22 with bcm43xx. If you like it, send it to John. Regards, Jean Signed-off-by: Jean Tourrilhes ----------------------------------------------------------- --- linux/net/ieee80211/ieee80211_wx.j1.c 2007-07-10 11:28:55.000000000 -0700 +++ linux/net/ieee80211/ieee80211_wx.c 2007-07-10 11:31:18.000000000 -0700 @@ -90,14 +90,11 @@ static char *ieee80211_translate_scan(st } /* Add channel and frequency */ + /* Note : userspace automatically computes channel using iwrange */ iwe.cmd = SIOCGIWFREQ; - iwe.u.freq.m = network->channel; - iwe.u.freq.e = 0; - iwe.u.freq.i = 0; - start = iwe_stream_add_event(start, stop, &iwe, IW_EV_FREQ_LEN); - iwe.u.freq.m = ieee80211_channel_to_freq(ieee, network->channel); iwe.u.freq.e = 6; + iwe.u.freq.i = 0; start = iwe_stream_add_event(start, stop, &iwe, IW_EV_FREQ_LEN); /* Add encryption capability */