From: Stephen Hemminger <shemminger@linux-foundation.org>
To: "Sébastien Judenherc" <sebastien.judenherc@agecodagis.com>
Cc: netdev@vger.kernel.org
Subject: Re: skge and sky2 stop working after a few minutes.
Date: Thu, 16 Aug 2007 09:17:13 -0400 [thread overview]
Message-ID: <20070816091713.66c1d147@oldman> (raw)
In-Reply-To: <loom.20070815T224114-635@post.gmane.org>
On Wed, 15 Aug 2007 21:20:37 +0000 (UTC)
Sébastien Judenherc <sebastien.judenherc@agecodagis.com> wrote:
> Hello,
> I can see some very strange problem with sky2 and skge interfaces with 2.6.22,
> and also 2.6.23-rc2/3.
> After 8-9 minutes, the interfaces stop working. ethtool reports that the link is
> down and the only way to make the interfaces usable again is
> removing/reinserting the module or running ethtool -r.
> This occurs for both sky2 and skge for two PCs connected to a gigabit switch.
> The other PCs on the same switch continue to work fine (most are 100Mbit/s). It
> also occurs on a third PC with skge, directly connected to a 100Mbit/s interface
> over a cross over cable. I didn't notice the problem with 2.6.19.
>
Looks like some noise sensitivity in the PHY. Could you try the vendor sk98lin
driver, although all drivers use the same phy settings.
prev parent reply other threads:[~2007-08-16 13:16 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-15 21:20 skge and sky2 stop working after a few minutes Sébastien Judenherc
2007-08-16 13:17 ` Stephen Hemminger [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070816091713.66c1d147@oldman \
--to=shemminger@linux-foundation.org \
--cc=netdev@vger.kernel.org \
--cc=sebastien.judenherc@agecodagis.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).