From: "John W. Linville" <linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
To: davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org
Cc: jeff-o2qLIJkoznsdnm+yROfE0A@public.gmane.org,
netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
sam-uyr5N9Q2VtJg9hUCZPvPmw@public.gmane.org
Subject: Please pull 'b43' branch of wireless-2.6
Date: Tue, 18 Sep 2007 16:28:19 -0400 [thread overview]
Message-ID: <20070918202819.GI4940@tuxdriver.com> (raw)
Jeff & Dave,
This series adds the b43 and b43legacy drivers, as well as the ssb
bus infrastructure upon which they depend.
These drivers support the BCM43xx wireless hardware from Broadcom.
The b43 driver supports modern hardware using the "version 4" firmware,
while the b43legacy driver uses the "version 3" firmware to support
some older devices which lack the resources to run the newer (and
more feature rich) firmware. Both drivers have performed well in
-mm and Fedora rawhide, and b43 has performed well in later Fedora
7 kernels as well.
Furthermore, Michael and Larry have both demonstrated a strong
commitment to the community and their users. They both have responded
to bugs both at the kernel.org bugzilla and in distro bugzillas.
I have every confidence that they will continue to support their
drivers at the same high standard that have already set. I'd like
to take this opportunity to thank both of them for their support both
in the past and in the future as well.
No doubt there are still problems here. But again, I think we would
be better served by mainlining this code rather than continuing to
maintain it out of stream.
Thanks!
John
---
Patches are here:
http://www.kernel.org/pub/linux/kernel/people/linville/wireless-2.6/b43/
---
The following changes since commit 0d4cbb5e7f60b2f1a4d8b7f6ea4cc264262c7a01:
Linus Torvalds (1):
Linux 2.6.23-rc6
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git b43
Larry Finger (1):
b43legacy: add mac80211-based driver for legacy BCM43xx devices
Michael Buesch (2):
ssb: add Sonics Silicon Backplane bus support
b43: add mac80211-based driver for modern BCM43xx devices
MAINTAINERS | 22 +
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/net/wireless/Kconfig | 2 +
drivers/net/wireless/Makefile | 2 +
drivers/net/wireless/b43/Kconfig | 119 +
drivers/net/wireless/b43/Makefile | 17 +
drivers/net/wireless/b43/b43.h | 845 ++++++
drivers/net/wireless/b43/debugfs.c | 654 +++++
drivers/net/wireless/b43/debugfs.h | 89 +
drivers/net/wireless/b43/dma.c | 1494 ++++++++++
drivers/net/wireless/b43/dma.h | 337 +++
drivers/net/wireless/b43/leds.c | 299 ++
drivers/net/wireless/b43/leds.h | 55 +
drivers/net/wireless/b43/lo.c | 1261 ++++++++
drivers/net/wireless/b43/lo.h | 112 +
drivers/net/wireless/b43/main.c | 4091 ++++++++++++++++++++++++++
drivers/net/wireless/b43/main.h | 142 +
drivers/net/wireless/b43/pcmcia.c | 157 +
drivers/net/wireless/b43/pcmcia.h | 20 +
drivers/net/wireless/b43/phy.c | 4351 ++++++++++++++++++++++++++++
drivers/net/wireless/b43/phy.h | 297 ++
drivers/net/wireless/b43/pio.c | 650 +++++
drivers/net/wireless/b43/pio.h | 153 +
drivers/net/wireless/b43/sysfs.c | 235 ++
drivers/net/wireless/b43/sysfs.h | 9 +
drivers/net/wireless/b43/tables.c | 375 +++
drivers/net/wireless/b43/tables.h | 28 +
drivers/net/wireless/b43/xmit.c | 648 +++++
drivers/net/wireless/b43/xmit.h | 250 ++
drivers/net/wireless/b43legacy/Kconfig | 89 +
drivers/net/wireless/b43legacy/Makefile | 14 +
drivers/net/wireless/b43legacy/b43legacy.h | 829 ++++++
drivers/net/wireless/b43legacy/debugfs.c | 505 ++++
drivers/net/wireless/b43legacy/debugfs.h | 89 +
drivers/net/wireless/b43legacy/dma.c | 1565 ++++++++++
drivers/net/wireless/b43legacy/dma.h | 367 +++
drivers/net/wireless/b43legacy/ilt.c | 336 +++
drivers/net/wireless/b43legacy/ilt.h | 34 +
drivers/net/wireless/b43legacy/leds.c | 302 ++
drivers/net/wireless/b43legacy/leds.h | 56 +
drivers/net/wireless/b43legacy/main.c | 3805 ++++++++++++++++++++++++
drivers/net/wireless/b43legacy/main.h | 147 +
drivers/net/wireless/b43legacy/phy.c | 2265 +++++++++++++++
drivers/net/wireless/b43legacy/phy.h | 219 ++
drivers/net/wireless/b43legacy/pio.c | 668 +++++
drivers/net/wireless/b43legacy/pio.h | 172 ++
drivers/net/wireless/b43legacy/radio.c | 2131 ++++++++++++++
drivers/net/wireless/b43legacy/radio.h | 98 +
drivers/net/wireless/b43legacy/sysfs.c | 238 ++
drivers/net/wireless/b43legacy/sysfs.h | 9 +
drivers/net/wireless/b43legacy/xmit.c | 642 ++++
drivers/net/wireless/b43legacy/xmit.h | 259 ++
drivers/ssb/Kconfig | 117 +
drivers/ssb/Makefile | 18 +
drivers/ssb/b43_pci_bridge.c | 46 +
drivers/ssb/driver_chipcommon.c | 446 +++
drivers/ssb/driver_extif.c | 129 +
drivers/ssb/driver_mipscore.c | 223 ++
drivers/ssb/driver_pcicore.c | 576 ++++
drivers/ssb/main.c | 1162 ++++++++
drivers/ssb/pci.c | 740 +++++
drivers/ssb/pcihost_wrapper.c | 104 +
drivers/ssb/pcmcia.c | 271 ++
drivers/ssb/scan.c | 413 +++
drivers/ssb/ssb_private.h | 136 +
include/linux/mod_devicetable.h | 15 +
include/linux/ssb/ssb.h | 424 +++
include/linux/ssb/ssb_driver_chipcommon.h | 396 +++
include/linux/ssb/ssb_driver_extif.h | 204 ++
include/linux/ssb/ssb_driver_mips.h | 46 +
include/linux/ssb/ssb_driver_pci.h | 106 +
include/linux/ssb/ssb_regs.h | 292 ++
scripts/mod/file2alias.c | 19 +
74 files changed, 37439 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/wireless/b43/Kconfig
create mode 100644 drivers/net/wireless/b43/Makefile
create mode 100644 drivers/net/wireless/b43/b43.h
create mode 100644 drivers/net/wireless/b43/debugfs.c
create mode 100644 drivers/net/wireless/b43/debugfs.h
create mode 100644 drivers/net/wireless/b43/dma.c
create mode 100644 drivers/net/wireless/b43/dma.h
create mode 100644 drivers/net/wireless/b43/leds.c
create mode 100644 drivers/net/wireless/b43/leds.h
create mode 100644 drivers/net/wireless/b43/lo.c
create mode 100644 drivers/net/wireless/b43/lo.h
create mode 100644 drivers/net/wireless/b43/main.c
create mode 100644 drivers/net/wireless/b43/main.h
create mode 100644 drivers/net/wireless/b43/pcmcia.c
create mode 100644 drivers/net/wireless/b43/pcmcia.h
create mode 100644 drivers/net/wireless/b43/phy.c
create mode 100644 drivers/net/wireless/b43/phy.h
create mode 100644 drivers/net/wireless/b43/pio.c
create mode 100644 drivers/net/wireless/b43/pio.h
create mode 100644 drivers/net/wireless/b43/sysfs.c
create mode 100644 drivers/net/wireless/b43/sysfs.h
create mode 100644 drivers/net/wireless/b43/tables.c
create mode 100644 drivers/net/wireless/b43/tables.h
create mode 100644 drivers/net/wireless/b43/xmit.c
create mode 100644 drivers/net/wireless/b43/xmit.h
create mode 100644 drivers/net/wireless/b43legacy/Kconfig
create mode 100644 drivers/net/wireless/b43legacy/Makefile
create mode 100644 drivers/net/wireless/b43legacy/b43legacy.h
create mode 100644 drivers/net/wireless/b43legacy/debugfs.c
create mode 100644 drivers/net/wireless/b43legacy/debugfs.h
create mode 100644 drivers/net/wireless/b43legacy/dma.c
create mode 100644 drivers/net/wireless/b43legacy/dma.h
create mode 100644 drivers/net/wireless/b43legacy/ilt.c
create mode 100644 drivers/net/wireless/b43legacy/ilt.h
create mode 100644 drivers/net/wireless/b43legacy/leds.c
create mode 100644 drivers/net/wireless/b43legacy/leds.h
create mode 100644 drivers/net/wireless/b43legacy/main.c
create mode 100644 drivers/net/wireless/b43legacy/main.h
create mode 100644 drivers/net/wireless/b43legacy/phy.c
create mode 100644 drivers/net/wireless/b43legacy/phy.h
create mode 100644 drivers/net/wireless/b43legacy/pio.c
create mode 100644 drivers/net/wireless/b43legacy/pio.h
create mode 100644 drivers/net/wireless/b43legacy/radio.c
create mode 100644 drivers/net/wireless/b43legacy/radio.h
create mode 100644 drivers/net/wireless/b43legacy/sysfs.c
create mode 100644 drivers/net/wireless/b43legacy/sysfs.h
create mode 100644 drivers/net/wireless/b43legacy/xmit.c
create mode 100644 drivers/net/wireless/b43legacy/xmit.h
create mode 100644 drivers/ssb/Kconfig
create mode 100644 drivers/ssb/Makefile
create mode 100644 drivers/ssb/b43_pci_bridge.c
create mode 100644 drivers/ssb/driver_chipcommon.c
create mode 100644 drivers/ssb/driver_extif.c
create mode 100644 drivers/ssb/driver_mipscore.c
create mode 100644 drivers/ssb/driver_pcicore.c
create mode 100644 drivers/ssb/main.c
create mode 100644 drivers/ssb/pci.c
create mode 100644 drivers/ssb/pcihost_wrapper.c
create mode 100644 drivers/ssb/pcmcia.c
create mode 100644 drivers/ssb/scan.c
create mode 100644 drivers/ssb/ssb_private.h
create mode 100644 include/linux/ssb/ssb.h
create mode 100644 include/linux/ssb/ssb_driver_chipcommon.h
create mode 100644 include/linux/ssb/ssb_driver_extif.h
create mode 100644 include/linux/ssb/ssb_driver_mips.h
create mode 100644 include/linux/ssb/ssb_driver_pci.h
create mode 100644 include/linux/ssb/ssb_regs.h
--
John W. Linville
linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org
next reply other threads:[~2007-09-18 20:28 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-18 20:28 John W. Linville [this message]
[not found] ` <20070918202819.GI4940-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
2007-09-18 21:32 ` Please pull 'b43' branch of wireless-2.6 David Miller
2007-09-19 10:54 ` Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070918202819.GI4940@tuxdriver.com \
--to=linville-2xusbdqka4r54taoqtywwq@public.gmane.org \
--cc=davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org \
--cc=jeff-o2qLIJkoznsdnm+yROfE0A@public.gmane.org \
--cc=linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=sam-uyr5N9Q2VtJg9hUCZPvPmw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).