From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Denys" Subject: Possible 2.6.22 -> 2.6.23 HTB regression? Date: Wed, 10 Oct 2007 15:32:22 +0300 Message-ID: <20071010123222.M71635@visp.net.lb> Mime-Version: 1.0 Content-Type: text/plain; charset=koi8-r To: netdev@vger.kernel.org Return-path: Received: from usermail.globalproof.net ([194.146.153.18]:47132 "EHLO usermail.globalproof.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752500AbXJJMdT (ORCPT ); Wed, 10 Oct 2007 08:33:19 -0400 Received: from visp.net.lb (localhost [127.0.0.1]) by usermail.globalproof.net (Postfix) with ESMTP id B11ECBDDCF for ; Wed, 10 Oct 2007 15:32:22 +0300 (EEST) Sender: netdev-owner@vger.kernel.org List-Id: netdev.vger.kernel.org P.S. dmesg Linux version 2.6.23-insat1 (root@visp-1) (gcc version 4.1.1 (Gentoo 4.1.1- r3)) #1 SMP Wed Oct 10 01:41:17 EEST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000100 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 000000003ffa8000 (usable) BIOS-e820: 000000003ffa8000 - 000000003ffb7c00 (ACPI data) BIOS-e820: 000000003ffb7c00 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000fe710 Entering add_active_range(0, 0, 262056) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 262056 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 262056 On node 0 totalpages: 262056 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 255 pages used for memmap HighMem zone: 32425 pages, LIFO batch:7 Movable zone: 0 pages used for memmap DMI 2.4 present. Using APIC driver default ACPI: RSDP 000F2620, 0024 (r2 DELL ) ACPI: XSDT 000F26A0, 004C (r1 DELL PE_SC3 1 DELL 1) ACPI: FACP 000F27A8, 00F4 (r3 DELL PE_SC3 1 DELL 1) ACPI: DSDT 3FFA8000, 3C53 (r1 DELL PE_SC3 1 MSFT 100000E) ACPI: FACS 3FFB7C00, 0040 ACPI: APIC 000F289C, 00E0 (r1 DELL PE_SC3 1 DELL 1) ACPI: SPCR 000F297D, 0050 (r1 DELL PE_SC3 1 DELL 1) ACPI: HPET 000F29CD, 0038 (r1 DELL PE_SC3 1 DELL 1) ACPI: MCFG 000F2A05, 003C (r1 DELL PE_SC3 1 DELL 1) ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:6 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) Processor #2 15:6 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) Processor #1 15:6 APIC version 20 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) Processor #3 15:6 APIC version 20 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x05] address[0xfec80000] gsi_base[32]) IOAPIC[1]: apic_id 5, version 32, address 0xfec80000, GSI 32-55 ACPI: IOAPIC (id[0x06] address[0xfec81000] gsi_base[64]) IOAPIC[2]: apic_id 6, version 32, address 0xfec81000, GSI 64-87 ACPI: IOAPIC (id[0x07] address[0xfec82000] gsi_base[96]) IOAPIC[3]: apic_id 7, version 32, address 0xfec82000, GSI 96-119 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 4 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) Built 1 zonelists in Zone order. Total pages: 260009 Kernel command line: root=/dev/sda3 panic=10 nmi_watchdog=1 mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) mapped IOAPIC to ffff9000 (fec80000) mapped IOAPIC to ffff8000 (fec81000) mapped IOAPIC to ffff7000 (fec82000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c050e000 soft=c04ee000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 3192.148 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1033564k/1048224k available (2453k kernel code, 14048k reserved, 1305k data, 232k init, 130720k highmem) virtual kernel memory layout: fixmap : 0xffe14000 - 0xfffff000 (1964 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc04b1000 - 0xc04eb000 ( 232 kB) .data : 0xc036544c - 0xc04ab97c (1305 kB) .text : 0xc0100000 - 0xc036544c (2453 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Calibrating delay using timer specific routine.. 6388.11 BogoMIPS (lpj=3194056) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e43d 00000000 00000001 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000e43d 00000000 00000001 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (24) available CPU0: Thermal monitoring enabled Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. Freeing SMP alternatives: 15k freed ACPI: Core revision 20070126 Parsing all Control Methods: Table [DSDT](id 0001) - 295 Objects with 44 Devices 111 Methods 8 Regions tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0079 [00] enable : System is already in ACPI mode CPU0: Intel(R) Xeon(TM) CPU 3.20GHz stepping 04 Booting processor 1/1 eip 2000 CPU 1 irqstacks, hard=c050f000 soft=c04ef000 Initializing CPU#1 Calibrating delay using timer specific routine.. 6383.75 BogoMIPS (lpj=3191875) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e43d 00000000 00000001 00000000 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000e43d 00000000 00000001 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (24) available CPU1: Thermal monitoring enabled CPU1: Intel(R) Xeon(TM) CPU 3.20GHz stepping 04 Booting processor 2/2 eip 2000 CPU 2 irqstacks, hard=c0510000 soft=c04f0000 Initializing CPU#2 Calibrating delay using timer specific routine.. 6383.77 BogoMIPS (lpj=3191888) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e43d 00000000 00000001 00000000 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000e43d 00000000 00000001 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#2. CPU2: Intel P4/Xeon Extended MCE MSRs (24) available CPU2: Thermal monitoring enabled CPU2: Intel(R) Xeon(TM) CPU 3.20GHz stepping 04 Booting processor 3/3 eip 2000 CPU 3 irqstacks, hard=c0511000 soft=c04f1000 Initializing CPU#3 Calibrating delay using timer specific routine.. 6383.75 BogoMIPS (lpj=3191876) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e43d 00000000 00000001 00000000 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000e43d 00000000 00000001 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#3. CPU3: Intel P4/Xeon Extended MCE MSRs (24) available CPU3: Thermal monitoring enabled CPU3: Intel(R) Xeon(TM) CPU 3.20GHz stepping 04 Total of 4 processors activated (25539.39 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 APIC timer registered as dummy, due to nmi_watchdog=1! checking TSC synchronization [CPU#0 -> CPU#1]: passed. checking TSC synchronization [CPU#0 -> CPU#2]: Measured 1056 cycles TSC warp between CPUs, turning off TSC clock. Marking TSC unstable due to: check_tsc_sync_source failed. Brought up 4 CPUs NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 1 Wake, Enabled 0 Runtime GPEs in this block ACPI: EC: Look up EC in DSDT Completing Region/Field/Buffer/Package initialization:................. Initialized 5/8 Regions 0/0 Fields 9/9 Buffers 3/4 Packages (304 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:. Executed 1 _INI methods requiring 0 _STA executions (examined 54 objects) ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: PXH quirk detected, disabling MSI for SHPC device PCI: PXH quirk detected, disabling MSI for SHPC device PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.PE2X._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.PE2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4.PE2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Time: hpet clocksource has been installed. Clockevents: could not switch to one-shot mode: lapic is not functional. Could not switch to high resolution mode on CPU 0 Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional. lapic is not functional. Could not switch to high resolution mode on CPU 2 Could not switch to high resolution mode on CPU 3 Clockevents: could not switch to one-shot mode: lapic is not functional. Could not switch to high resolution mode on CPU 1 pnp: 00:08: ioport range 0x800-0x87f has been reserved pnp: 00:08: ioport range 0x880-0x8bf has been reserved pnp: 00:08: ioport range 0x8c0-0x8df has been reserved pnp: 00:08: ioport range 0x8e0-0x8e3 has been reserved pnp: 00:08: ioport range 0xc00-0xc7f has been reserved pnp: 00:08: ioport range 0xca0-0xca7 has been reserved pnp: 00:08: ioport range 0xca9-0xcab has been reserved pnp: 00:08: ioport range 0xcad-0xcaf has been reserved pnp: 00:09: ioport range 0xca8-0xca8 has been reserved pnp: 00:09: ioport range 0xcac-0xcac has been reserved pnp: 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved PCI: Bridge: 0000:07:00.0 IO window: disabled. MEM window: f4000000-f7ffffff PREFETCH window: disabled. PCI: Bridge: 0000:06:00.0 IO window: disabled. MEM window: f4000000-f7ffffff PREFETCH window: disabled. PCI: Bridge: 0000:06:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:05:00.0 IO window: disabled. MEM window: f4000000-f7ffffff PREFETCH window: disabled. PCI: Bridge: 0000:05:00.3 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: f2000000-f7ffffff PREFETCH window: disabled. PCI: Bridge: 0000:01:00.0 IO window: e000-efff MEM window: fc500000-fc6fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: e000-efff MEM window: fc400000-fc6fffff PREFETCH window: disabled. PCI: Bridge: 0000:0b:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: fc300000-fc3fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:07.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:03:00.0 IO window: disabled. MEM window: f8000000-fbffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: f8000000-fbffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: fc100000-fc2fffff PREFETCH window: d8000000-dfffffff ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:05:00.0 to 64 ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:06:00.0 to 64 PCI: Setting latency timer of device 0000:07:00.0 to 64 ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:06:01.0 to 64 PCI: Setting latency timer of device 0000:05:00.3 to 64 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:01:00.0 to 64 ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:0b:00.0 to 64 ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:05.0 to 64 ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:00:07.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:03:00.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Machine check exception polling timer started. IA-32 Microcode Update Driver: v1.14a highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). io scheduler noop registered io scheduler cfq registered (default) Boot video device is 0000:10:0d.0 PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie01] PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] Allocate Port Service[0000:00:03.0:pcie01] PCI: Setting latency timer of device 0000:00:04.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:04.0:pcie00] Allocate Port Service[0000:00:04.0:pcie01] PCI: Setting latency timer of device 0000:00:05.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:05.0:pcie00] Allocate Port Service[0000:00:05.0:pcie01] PCI: Setting latency timer of device 0000:00:06.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:06.0:pcie00] Allocate Port Service[0000:00:06.0:pcie01] PCI: Setting latency timer of device 0000:00:07.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:07.0:pcie00] Allocate Port Service[0000:00:07.0:pcie01] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:05:00.0 to 64 Allocate Port Service[0000:05:00.0:pcie10] Allocate Port Service[0000:05:00.0:pcie11] PCI: Setting latency timer of device 0000:06:00.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:06:00.0:pcie20] Allocate Port Service[0000:06:00.0:pcie21] PCI: Setting latency timer of device 0000:06:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:06:01.0:pcie20] Allocate Port Service[0000:06:01.0:pcie21] AER service couldn't init device 0000:00:02.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:03.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:04.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:05.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:06.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:07.0:pcie01 - no _OSC support input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy intel_rng: FWH not detected Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional. lapic is not functional. Could not switch to high resolution mode on CPU 3 Could not switch to high resolution mode on CPU 2 Clockevents: could not switch to one-shot mode: lapic is not functional. Could not switch to high resolution mode on CPU 0 lapic is not functional. Could not switch to high resolution mode on CPU 1 floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: module loaded Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.6.5 (September 20, 2007) ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 16 eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 001372f873ae ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16 eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 001372f873ac Loading iSCSI transport class v2.0-724. Fusion MPT base driver 3.04.05 Copyright (c) 1999-2007 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.05 Fusion MPT FC Host driver 3.04.05 Fusion MPT SAS Host driver 3.04.05 PCI: Enabling device 0000:02:08.0 (0156 -> 0157) ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 64 (level, low) -> IRQ 17 mptbase: Initiating ioc0 bringup ioc0: LSISAS1068 B0: Capabilities={Initiator} scsi0 : ioc0: LSISAS1068 B0, FwRev=00062800h, Ports=1, MaxQ=511, IRQ=17 scsi 0:0:0:0: Direct-Access ATA WDC WD800JD-75MS 1E04 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 67 00 00 08 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 67 00 00 08 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 Fusion MPT misc device (ioctl) driver 3.04.05 mptctl: Registered with Fusion MPT base driver mptctl: /dev/mptctl @ (major,minor=10,220) usbmon: debugfs is not available ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 18, io mem 0xfc700000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000cce0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ccc0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000cca0 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-5: new high speed USB device using ehci_hcd and address 3 usb 1-5: configuration #1 chosen from 1 choice hub 1-5:1.0: USB hub found hub 1-5:1.0: 4 ports detected usbcore: registered new interface driver usblp PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice EDAC MC: Ver: 2.1.0 Oct 10 2007 EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0 EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED) usb 3-2: new low speed USB device using uhci_hcd and address 2 usb 3-2: configuration #1 chosen from 1 choice input: DELL DELL USB Keyboard as /class/input/input1 input: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1d.1-2 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Testing NMI watchdog ... OK. Using IPI Shortcut mode EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 232k freed net eth0_rename: device_rename: sysfs_create_symlink failed (-17) net eth0: device_rename: sysfs_create_symlink failed (-17) net eth1: device_rename: sysfs_create_symlink failed (-17) libata version 2.21 loaded. ata_piix 0000:00:1f.1: version 2.12 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi1 : ata_piix scsi2 : ata_piix ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fc00 irq 14 ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fc08 irq 15 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x0860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) ata1.00: ATAPI: TEAC CD-ROM CD-224E-N, 3.AB, max UDMA/33 ata1.00: configured for UDMA/33 ata2: port disabled. ignoring. scsi 1:0:0:0: CD-ROM TEAC CD-ROM CD-224E-N 3.AB PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 EXT3 FS on sda3, internal journal ipmi message handler version 39.1 IPMI System Interface driver. ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0 ipmi: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20) IPMI kcs interface initialized ipmi device interface IPMI Watchdog: Unable to register misc device IPMI Watchdog: driver initialized Unable to find swap-space signature bnx2: eth1: using MSI bnx2: eth0: using MSI 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex device eth0.2022 entered promiscuous mode device eth0 entered promiscuous mode device eth0.2022 left promiscuous mode device eth0 left promiscuous mode device eth0.2022 entered promiscuous mode device eth0 entered promiscuous mode device eth0.2022 left promiscuous mode device eth0 left promiscuous mode device eth0.2022 entered promiscuous mode device eth0 entered promiscuous mode device eth0.2022 left promiscuous mode device eth0 left promiscuous mode device eth0.2022 entered promiscuous mode device eth0 entered promiscuous mode device eth0.2022 left promiscuous mode device eth0 left promiscuous mode u32 classifier Performance counters on input device check on Actions configured device eth0.2022 entered promiscuous mode device eth0 entered promiscuous mode device eth0.2022 left promiscuous mode device eth0 left promiscuous mode trafanal[9729]: segfault at ffffffff eip b6d00030 esp b7645270 error 6 trafanal[9732]: segfault at 076eaa90 eip b7f45a07 esp 076eaa90 error 6 trafanal[9809]: segfault at 00000024 eip 0805220d esp b7db79d0 error 4 trafanal[9812]: segfault at 00000025 eip b7f66ffa esp b7e40c70 error 6 trafanal[9963]: segfault at b6cd9000 eip b7ea91a7 esp b7e3b998 error 6 trafanal[9966]: segfault at 973d037c eip b7f5e9d3 esp b760e114 error 4 >>>>here is try to switch clocksource to acpi_pm Time: acpi_pm clocksource has been installed. Clockevents: could not switch to one-shot mode: lapic is not functional. Could not switch to high resolution mode on CPU 0 Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional. Could not switch to high resolution mode on CPU 3 Clockevents: could not switch to one-shot mode: lapic is not functional. Could not switch to high resolution mode on CPU 1 lapic is not functional. Could not switch to high resolution mode on CPU 2 Time: hpet clocksource has been installed. Clockevents: could not switch to one-shot mode: lapic is not functional. Could not switch to high resolution mode on CPU 0 Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional. Could not switch to high resolution mode on CPU 3 Clockevents: could not switch to one-shot mode: lapic is not functional. Could not switch to high resolution mode on CPU 1 lapic is not functional. Could not switch to high resolution mode on CPU 2 Kernel config http://www.nuclearcat.com/shaper_config.gz -- Denys Fedoryshchenko Technical Manager Virtual ISP S.A.L.