From: Andreas Henriksson <andreas@fatal.se>
To: Patrick McHardy <kaber@trash.net>
Cc: maximilian attems <max@stro.at>,
shemminger@linux-foundation.org, netdev@vger.kernel.org
Subject: Re: iproute2: git pull request from debian repo.
Date: Tue, 23 Oct 2007 16:18:38 +0200 [thread overview]
Message-ID: <20071023141838.GA25201@scream.fatal.se> (raw)
In-Reply-To: <471B90E5.1040108@trash.net>
On Sun, Oct 21, 2007 at 07:48:21PM +0200, Patrick McHardy wrote:
> Andreas Henriksson wrote:
> >- for (;;) {
> >+ while (round < MAX_ROUNDS) {
> > if (rtnl_wilddump_request(&rth, filter.family,
> > RTM_GETADDR) < 0) {
> > perror("Cannot send dump request");
> > exit(1);
> >@@ -694,6 +696,8 @@ int ipaddr_list_or_flush(int argc, char **argv, int
> >flush)
> > fflush(stdout);
> > }
> > }
> >+ fprintf(stderr, "*** Flush remains incomplete after %d
> >rounds. ***\n", MAX_ROUNDS); fflush(stderr);
>
>
> Again, please make this optional. People might want to make
> sure the cache is flushed even if it takes a bit longer.
And here's the alternativ with configurable max rounds (0=infinite)...
diff --git a/ip/ipaddress.c b/ip/ipaddress.c
index ff9e318..e4ba340 100644
--- a/ip/ipaddress.c
+++ b/ip/ipaddress.c
@@ -67,6 +67,7 @@ static void usage(void)
fprintf(stderr, " ip addr del IFADDR dev STRING\n");
fprintf(stderr, " ip addr {show|flush} [ dev STRING ] [ scope SCOPE-ID ]\n");
fprintf(stderr, " [ to PREFIX ] [ FLAG-LIST ] [ label PATTERN ]\n");
+ fprintf(stderr, " [ maxrounds N ]\n");
fprintf(stderr, "IFADDR := PREFIX | ADDR peer PREFIX\n");
fprintf(stderr, " [ broadcast ADDR ] [ anycast ADDR ]\n");
fprintf(stderr, " [ label STRING ] [ scope SCOPE-ID ]\n");
@@ -566,6 +567,7 @@ int ipaddr_list_or_flush(int argc, char **argv, int flush)
struct nlmsg_list *l, *n;
char *filter_dev = NULL;
int no_link = 0;
+ int maxrounds = MAX_ROUNDS;
ipaddr_reset_filter(oneline);
filter.showqueue = 1;
@@ -630,6 +632,9 @@ int ipaddr_list_or_flush(int argc, char **argv, int flush)
} else if (strcmp(*argv, "label") == 0) {
NEXT_ARG();
filter.label = *argv;
+ } else if (strcmp(*argv, "maxrounds") == 0) {
+ NEXT_ARG();
+ maxrounds = atoi(*argv);
} else {
if (strcmp(*argv, "dev") == 0) {
NEXT_ARG();
@@ -669,7 +674,7 @@ int ipaddr_list_or_flush(int argc, char **argv, int flush)
filter.flushp = 0;
filter.flushe = sizeof(flushb);
- while (round < MAX_ROUNDS) {
+ while ((maxrounds == 0) || (round < maxrounds)) {
if (rtnl_wilddump_request(&rth, filter.family, RTM_GETADDR) < 0) {
perror("Cannot send dump request");
exit(1);
@@ -696,7 +701,10 @@ int ipaddr_list_or_flush(int argc, char **argv, int flush)
fflush(stdout);
}
}
- fprintf(stderr, "*** Flush remains incomplete after %d rounds. ***\n", MAX_ROUNDS); fflush(stderr);
+ fprintf(stderr,
+ "*** Flush remains incomplete after %d rounds. ***\n",
+ maxrounds);
+ fflush(stderr);
return 1;
}
diff --git a/ip/ipneigh.c b/ip/ipneigh.c
index db684f5..5a9ce40 100644
--- a/ip/ipneigh.c
+++ b/ip/ipneigh.c
@@ -53,6 +53,7 @@ static void usage(void)
" [ nud { permanent | noarp | stale | reachable } ]\n"
" | proxy ADDR } [ dev DEV ]\n");
fprintf(stderr, " ip neigh {show|flush} [ to PREFIX ] [ dev DEV ] [ nud STATE ]\n");
+ fprintf(stderr, " [ maxrounds N ]\n");
exit(-1);
}
@@ -321,6 +322,7 @@ int do_show_or_flush(int argc, char **argv, int flush)
{
char *filter_dev = NULL;
int state_given = 0;
+ int maxrounds = MAX_ROUNDS;
ipneigh_reset_filter();
@@ -361,6 +363,9 @@ int do_show_or_flush(int argc, char **argv, int flush)
if (state == 0)
state = 0x100;
filter.state |= state;
+ } else if (strcmp(*argv, "maxrounds") == 0) {
+ NEXT_ARG();
+ maxrounds = atoi(*argv);
} else {
if (strcmp(*argv, "to") == 0) {
NEXT_ARG();
@@ -392,7 +397,7 @@ int do_show_or_flush(int argc, char **argv, int flush)
filter.flushe = sizeof(flushb);
filter.state &= ~NUD_FAILED;
- while (round < MAX_ROUNDS) {
+ while ((maxrounds == 0) || (round < maxrounds)) {
if (rtnl_wilddump_request(&rth, filter.family, RTM_GETNEIGH) < 0) {
perror("Cannot send dump request");
exit(1);
@@ -418,8 +423,10 @@ int do_show_or_flush(int argc, char **argv, int flush)
fflush(stdout);
}
}
- printf("*** Flush not complete bailing out after %d rounds\n",
- MAX_ROUNDS);
+ fprintf(stderr,
+ "*** Flush remains incomplete after %d rounds. ***\n",
+ maxrounds);
+ fflush(stderr);
return 1;
}
--
Regards,
Andreas Henriksson
next prev parent reply other threads:[~2007-10-23 14:22 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-19 12:27 iproute2: git pull request from debian repo Andreas Henriksson
2007-10-19 13:06 ` maximilian attems
2007-10-19 14:48 ` Andreas Henriksson
2007-10-21 17:48 ` Patrick McHardy
2007-10-23 13:56 ` Andreas Henriksson
2007-10-23 14:18 ` Andreas Henriksson [this message]
2007-10-23 14:38 ` Patrick McHardy
2007-10-23 15:01 ` Andreas Henriksson
2007-10-23 15:08 ` Patrick McHardy
2007-10-23 15:27 ` Andreas Henriksson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071023141838.GA25201@scream.fatal.se \
--to=andreas@fatal.se \
--cc=kaber@trash.net \
--cc=max@stro.at \
--cc=netdev@vger.kernel.org \
--cc=shemminger@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).