From: Stephen Hemminger <shemminger@linux-foundation.org>
To: David Miller <davem@davemloft.net>, Jeff Garzik <jgarzik@pobox.com>
Cc: netdev@vger.kernel.org
Subject: [PATCH 3/7] sky2: longer PHY delay
Date: Mon, 05 Nov 2007 15:52:10 -0800 [thread overview]
Message-ID: <20071105235340.090185872@linux-foundation.org> (raw)
In-Reply-To: 20071105235207.799504040@linux-foundation.org
[-- Attachment #1: sky2-phy-delay.patch --]
[-- Type: text/plain, Size: 2310 bytes --]
Increse phy delay and handle I/O errors.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
--- a/drivers/net/sky2.c 2007-11-05 15:04:55.000000000 -0800
+++ b/drivers/net/sky2.c 2007-11-05 15:05:00.000000000 -0800
@@ -156,7 +156,7 @@ static const char *yukon2_name[] = {
static void sky2_set_multicast(struct net_device *dev);
-/* Access to external PHY */
+/* Access to PHY via serial interconnect */
static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val)
{
int i;
@@ -166,13 +166,22 @@ static int gm_phy_write(struct sky2_hw *
GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg));
for (i = 0; i < PHY_RETRIES; i++) {
- if (!(gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_BUSY))
+ u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL);
+ if (ctrl == 0xffff)
+ goto io_error;
+
+ if (!(ctrl & GM_SMI_CT_BUSY))
return 0;
- udelay(1);
+
+ udelay(10);
}
- printk(KERN_WARNING PFX "%s: phy write timeout\n", hw->dev[port]->name);
+ dev_warn(&hw->pdev->dev,"%s: phy write timeout\n", hw->dev[port]->name);
return -ETIMEDOUT;
+
+io_error:
+ dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name);
+ return -EIO;
}
static int __gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg, u16 *val)
@@ -183,23 +192,29 @@ static int __gm_phy_read(struct sky2_hw
| GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD);
for (i = 0; i < PHY_RETRIES; i++) {
- if (gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_RD_VAL) {
+ u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL);
+ if (ctrl == 0xffff)
+ goto io_error;
+
+ if (ctrl & GM_SMI_CT_RD_VAL) {
*val = gma_read16(hw, port, GM_SMI_DATA);
return 0;
}
- udelay(1);
+ udelay(10);
}
+ dev_warn(&hw->pdev->dev, "%s: phy read timeout\n", hw->dev[port]->name);
return -ETIMEDOUT;
+io_error:
+ dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name);
+ return -EIO;
}
-static u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
+static inline u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
{
u16 v;
-
- if (__gm_phy_read(hw, port, reg, &v) != 0)
- printk(KERN_WARNING PFX "%s: phy read timeout\n", hw->dev[port]->name);
+ __gm_phy_read(hw, port, reg, &v);
return v;
}
--
Stephen Hemminger <shemminger@linux-foundation.org>
next prev parent reply other threads:[~2007-11-05 23:56 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-05 23:52 [PATCH 0/7] sky2: update for 2.6.24-rc2 Stephen Hemminger
2007-11-05 23:52 ` [PATCH 1/7] sky2: enable PCI config writes Stephen Hemminger
2007-11-06 17:41 ` Jeff Garzik
2007-11-05 23:52 ` [PATCH 2/7] sky2: status ring race fix Stephen Hemminger
2007-11-05 23:52 ` Stephen Hemminger [this message]
2007-11-05 23:52 ` [PATCH 4/7] sky2: dont change LED after autoneg Stephen Hemminger
2007-11-05 23:52 ` [PATCH 5/7] sky2: remove unneeded mask update Stephen Hemminger
2007-11-05 23:52 ` [PATCH 6/7] sky2: handle advanced error recovery config issues Stephen Hemminger
2007-11-05 23:52 ` [PATCH 7/7] sky2: version 1.20 Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071105235340.090185872@linux-foundation.org \
--to=shemminger@linux-foundation.org \
--cc=davem@davemloft.net \
--cc=jgarzik@pobox.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).