From: "John W. Linville" <linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
To: jeff-o2qLIJkoznsdnm+yROfE0A@public.gmane.org
Cc: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Please pull 'upstream-jgarzik' branch of wireless-2.6
Date: Mon, 5 Nov 2007 20:16:27 -0500 [thread overview]
Message-ID: <20071106011627.GB23747@tuxdriver.com> (raw)
Jeff,
Here is a slew of patches targeted for 2.6.25. There are a bunch
of rt2x00, iwl3945, iwl4965, b43, and b43legacy patches, as well as
a few others. I'm sorry I didn't spread this out better -- I got a
bit behind... :-(
Thanks,
John
---
Individual patches are available here:
http://www.kernel.org/pub/linux/kernel/people/linville/wireless-2.6/upstream-jgarzik/
---
The following changes since commit 5d66f151ac7cb5162f201fe2996c6e01f0323f37:
Linus Torvalds (1):
Merge master.kernel.org:/.../gregkh/pci-2.6
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git upstream-jgarzik
Adam Baker (2):
rt2x00: Unconstify rt2x00dev
rt2x00: Place mutex around USB register access
Christoph Hellwig (3):
iwlwifi: mark more functions/variables static
iwlwifi: keep 3945 and 4965 headers separate
iwlwifi: cleanup Kconfig and ifdefs to split 3945 and 4965
Dan Williams (1):
orinoco: more reliable scan handling
Dmitry Torokhov (1):
P54: use temporary variables to reduce size of generated code
Emmanuel Grumbach (3):
iwlwifi-ht: move 4965 SCD registers to iwl-prph.h
iwlwifi: move 3945 SCD registers to iwl-prph.h
iwlwifi: add 5965 SCD registers to iwl-prph.h
Holger Schurig (1):
libertas: move wlan_*_association_work from header to c file
Ian Schram (5):
iwlwifi: fix various spelling and typos
iwlwifi: rename iwl_eeprom_aqcuire_semaphore to _acquire_
iwlwifi: Two comments in iwl-3945.c were longer than 80 columns
iwlwifi: Beautify by removing superfluous newlines and code
iwlwifi: remove late null-check and duplicate bug_on
Ivo van Doorn (15):
rt2x00: Move quality statistics into seperate structure
rt2x00: Use enum defines
rt2x00: Correctly translate mac80211 antenna setup to rt2x00
rt2x00: SW diversity should default to antenna B
rt2x00: Remove rt2x00_clear_link
rt2x00: Implement SW diversity
rt2x00: Cleanup if-statements
rt2x00: Release rt2x00 2.0.11
rt2x00: Disable RX when switching antenna
rt2x00: Split rt61/rt73 antenna selection into RX and TX antenna
rt2x00: Input-polldev requires input device
rt2x00: Detect initial rfkill state on register
rt2x00: Remove unused variables
rt2x00: Remove data_desc structure
rt2x00: Release rt2x00 2.0.12
Jes Sorensen (1):
iwlwifi: disable interrupts before calling request_irq
Larry Finger (4):
b43legacy: LED triggers support
b43legacy: RF-kill support
b43legacy: Use input-polldev for the rfkill switch
b43legacy: Rewrite pwork locking
Matthias Kaehlcke (1):
Prism54: Convert mgmt_sem to the mutex API
Mattias Nissler (4):
rt2x00: Fix antenna selection.
rt2x00: Rework rt61 antenna selection.
rt2x00: Rework rt73 antenna selection
rt2x00: Correctly set ACK bit in tx descriptors
Michael Buesch (7):
b43legacy: Remove set_key callback
b43: Dereference of wl->current_dev must be protected by wl->mutex
b43: Use the retry limit parameters from mac80211
b43: consistent naming for ieee80211_ops
b43: Fix rfkill callback deadlock
b43: debugfs SHM read buffer overrun fix
b43: Rewrite and fix rfkill init
Roel Kluin (1):
wireless: fix '!x & y' typo's
Tomas Winkler (11):
iwlwifi: Add erp_ie_changed hanlder
iwlwifi: renaming last_used and first_empty
iwlwifi: rs-4965 fix return values
iwlwifi: add TGN flag to qos parameters
iwlwifi: remove cck_flag from iwl_driver_hw_info
iwlwifi: remove cck_power_index_compensation
iwlwifi: using PCI_DEVICE macro
iwlwifi: replace restricted_reg with prph
iwlwifi: rename restricted_mem to targ_mem
iwlwifi: replacing wording restricted to nic access in iwl-io
iwlwifi: Renames struct fw_image_desc to struct fw_desc
Zhu Yi (2):
iwlwifi: Update iwlwifi version stamp to 1.1.18
iwlwifi: Update iwlwifi version stamp to 1.1.19
mabbas (2):
iwlwifi: accept up to 4K frame size on Rx side to fit A-MSDU frame
iwl4965: exclude 60M rate from probe request
drivers/net/wireless/Makefile | 3 +-
drivers/net/wireless/airo.c | 2 +-
drivers/net/wireless/atmel.c | 2 +-
drivers/net/wireless/b43/debugfs.c | 2 +-
drivers/net/wireless/b43/main.c | 159 ++--
drivers/net/wireless/b43/rfkill.c | 115 +--
drivers/net/wireless/b43/rfkill.h | 14 +-
drivers/net/wireless/b43/xmit.c | 3 +-
drivers/net/wireless/b43legacy/Kconfig | 12 +
drivers/net/wireless/b43legacy/Makefile | 29 +-
drivers/net/wireless/b43legacy/b43legacy.h | 11 +-
drivers/net/wireless/b43legacy/leds.c | 413 ++++-----
drivers/net/wireless/b43legacy/leds.h | 61 +-
drivers/net/wireless/b43legacy/main.c | 214 ++---
drivers/net/wireless/b43legacy/radio.c | 15 +-
drivers/net/wireless/b43legacy/radio.h | 2 +-
drivers/net/wireless/b43legacy/rfkill.c | 185 ++++
drivers/net/wireless/b43legacy/rfkill.h | 59 ++
drivers/net/wireless/iwlwifi/Kconfig | 169 ++--
.../{iwl-commands.h => iwl-3945-commands.h} | 275 +-----
.../iwlwifi/{iwl-debug.h => iwl-3945-debug.h} | 6 +-
drivers/net/wireless/iwlwifi/iwl-3945-hw.h | 629 ++++++++++++-
.../wireless/iwlwifi/{iwl-io.h => iwl-3945-io.h} | 289 +++---
drivers/net/wireless/iwlwifi/iwl-3945-rs.c | 8 +-
drivers/net/wireless/iwlwifi/iwl-3945-rs.h | 4 +-
drivers/net/wireless/iwlwifi/iwl-3945.c | 182 ++--
drivers/net/wireless/iwlwifi/iwl-3945.h | 963 ++++++++++++++++++-
.../{iwl-commands.h => iwl-4965-commands.h} | 154 +---
.../iwlwifi/{iwl-debug.h => iwl-4965-debug.h} | 6 +-
drivers/net/wireless/iwlwifi/iwl-4965-hw.h | 711 +++++++++++++-
.../wireless/iwlwifi/{iwl-io.h => iwl-4965-io.h} | 289 +++---
drivers/net/wireless/iwlwifi/iwl-4965-rs.c | 149 ++--
drivers/net/wireless/iwlwifi/iwl-4965-rs.h | 4 +-
drivers/net/wireless/iwlwifi/iwl-4965.c | 305 +++---
drivers/net/wireless/iwlwifi/iwl-4965.h | 1035 +++++++++++++++++++-
drivers/net/wireless/iwlwifi/iwl-channel.h | 161 ---
drivers/net/wireless/iwlwifi/iwl-eeprom.h | 336 -------
drivers/net/wireless/iwlwifi/iwl-hw.h | 537 ----------
drivers/net/wireless/iwlwifi/iwl-priv.h | 308 ------
drivers/net/wireless/iwlwifi/iwl-prph.h | 53 +-
drivers/net/wireless/iwlwifi/iwl3945-base.c | 405 ++++----
drivers/net/wireless/iwlwifi/iwl4965-base.c | 529 +++++-----
drivers/net/wireless/iwlwifi/iwlwifi.h | 708 -------------
drivers/net/wireless/libertas/assoc.h | 18 -
drivers/net/wireless/libertas/wext.c | 52 +-
drivers/net/wireless/orinoco.c | 541 ++++++-----
drivers/net/wireless/orinoco.h | 12 +-
drivers/net/wireless/p54common.c | 2 +-
drivers/net/wireless/p54pci.c | 77 +-
drivers/net/wireless/prism54/isl_ioctl.c | 4 +-
drivers/net/wireless/prism54/islpci_dev.c | 2 +-
drivers/net/wireless/prism54/islpci_dev.h | 3 +-
drivers/net/wireless/prism54/islpci_mgt.c | 4 +-
drivers/net/wireless/rt2x00/rt2400pci.c | 104 ++-
drivers/net/wireless/rt2x00/rt2400pci.h | 4 +-
drivers/net/wireless/rt2x00/rt2500pci.c | 112 ++--
drivers/net/wireless/rt2x00/rt2500pci.h | 4 +-
drivers/net/wireless/rt2x00/rt2500usb.c | 169 +++--
drivers/net/wireless/rt2x00/rt2500usb.h | 17 +-
drivers/net/wireless/rt2x00/rt2x00.h | 192 +++-
drivers/net/wireless/rt2x00/rt2x00config.c | 95 ++-
drivers/net/wireless/rt2x00/rt2x00debug.h | 4 +-
drivers/net/wireless/rt2x00/rt2x00dev.c | 212 ++++-
drivers/net/wireless/rt2x00/rt2x00lib.h | 2 +
drivers/net/wireless/rt2x00/rt2x00pci.c | 4 +-
drivers/net/wireless/rt2x00/rt2x00pci.h | 8 +-
drivers/net/wireless/rt2x00/rt2x00rfkill.c | 44 +-
drivers/net/wireless/rt2x00/rt2x00ring.h | 23 +-
drivers/net/wireless/rt2x00/rt2x00usb.c | 38 +-
drivers/net/wireless/rt2x00/rt2x00usb.h | 19 +-
drivers/net/wireless/rt2x00/rt61pci.c | 332 ++++---
drivers/net/wireless/rt2x00/rt61pci.h | 14 +-
drivers/net/wireless/rt2x00/rt73usb.c | 198 +++--
drivers/net/wireless/rt2x00/rt73usb.h | 14 +-
drivers/net/wireless/zd1211rw/zd_rf_uw2453.c | 2 +-
net/ieee80211/ieee80211_wx.c | 2 +-
76 files changed, 6655 insertions(+), 5189 deletions(-)
create mode 100644 drivers/net/wireless/b43legacy/rfkill.c
create mode 100644 drivers/net/wireless/b43legacy/rfkill.h
copy drivers/net/wireless/iwlwifi/{iwl-commands.h => iwl-3945-commands.h} (86%)
copy drivers/net/wireless/iwlwifi/{iwl-debug.h => iwl-3945-debug.h} (97%)
copy drivers/net/wireless/iwlwifi/{iwl-io.h => iwl-3945-io.h} (50%)
rename drivers/net/wireless/iwlwifi/{iwl-commands.h => iwl-4965-commands.h} (93%)
rename drivers/net/wireless/iwlwifi/{iwl-debug.h => iwl-4965-debug.h} (97%)
rename drivers/net/wireless/iwlwifi/{iwl-io.h => iwl-4965-io.h} (50%)
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-channel.h
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-eeprom.h
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-hw.h
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-priv.h
delete mode 100644 drivers/net/wireless/iwlwifi/iwlwifi.h
Omnibus patch available here:
http://www.kernel.org/pub/linux/kernel/people/linville/upstream-jgarzik.patch
--
John W. Linville
linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org
next reply other threads:[~2007-11-06 1:16 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-06 1:16 John W. Linville [this message]
2007-11-06 17:43 ` Please pull 'upstream-jgarzik' branch of wireless-2.6 Jeff Garzik
-- strict thread matches above, loose matches on Subject: below --
2008-01-08 22:23 John W. Linville
2007-12-20 15:54 John W. Linville
2007-12-16 4:34 John W. Linville
2007-12-17 23:24 ` Jeff Garzik
[not found] ` <47670514.4030204-o2qLIJkoznsdnm+yROfE0A@public.gmane.org>
2007-12-17 23:40 ` Jeff Garzik
2007-12-18 1:24 ` Zhu Yi
2007-12-04 13:59 John W. Linville
2007-12-04 20:13 ` Jeff Garzik
2007-11-27 14:47 John W. Linville
[not found] ` <20071127144748.GA12408-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
2007-12-04 13:55 ` John W. Linville
2007-09-15 13:21 John W. Linville
2007-09-18 1:54 ` Zhu Yi
[not found] <20070828231731.GB2967@tuxdriver.com>
[not found] ` <20070828231731.GB2967-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
2007-08-31 13:44 ` Jeff Garzik
2007-08-15 0:36 John W. Linville
[not found] ` <20070815003637.GK7198-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
2007-08-25 6:40 ` Jeff Garzik
2007-08-06 20:14 Please pull 'fixes-jgarzik' " John W. Linville
[not found] ` <20070806201441.GJ6442-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
2007-08-06 20:16 ` Please pull 'upstream-jgarzik' " John W. Linville
2007-08-07 22:21 ` Jeff Garzik
2007-07-18 2:19 John W. Linville
[not found] ` <20070718021953.GC26907-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
2007-07-18 22:31 ` Jeff Garzik
2007-07-10 18:57 John W. Linville
[not found] ` <20070710185758.GH7927-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
2007-07-16 21:59 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071106011627.GB23747@tuxdriver.com \
--to=linville-2xusbdqka4r54taoqtywwq@public.gmane.org \
--cc=jeff-o2qLIJkoznsdnm+yROfE0A@public.gmane.org \
--cc=linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).