From: Ben Dooks <ben-linux@fluff.org>
To: netdev@vger.kernel.org
Cc: vince@simtec.co.uk, Ben Dooks <ben-linux@fluff.org>
Subject: [patch 04/22] NET: DM9000: Add initial ethtool support
Date: Mon, 19 Nov 2007 20:39:14 +0000 [thread overview]
Message-ID: <20071119204013.403622199@fluff.org> (raw)
In-Reply-To: 20071119203910.687238131@fluff.org
[-- Attachment #1: simtec/simtec-drivers-net-dm9000-ethtool.patch --]
[-- Type: text/plain, Size: 3331 bytes --]
Add support for ethtool operations for the DM9000.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Index: linux-2.6.23-quilt3/drivers/net/dm9000.c
===================================================================
--- linux-2.6.23-quilt3.orig/drivers/net/dm9000.c
+++ linux-2.6.23-quilt3/drivers/net/dm9000.c
@@ -63,6 +63,7 @@
#include <linux/spinlock.h>
#include <linux/crc32.h>
#include <linux/mii.h>
+#include <linux/ethtool.h>
#include <linux/dm9000.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
@@ -79,6 +80,7 @@
#define CARDNAME "dm9000"
#define PFX CARDNAME ": "
+#define DRV_VERSION "1.30"
#define DM9000_TIMER_WUT jiffies+(HZ*2) /* timer wakeup time : 2 second */
@@ -147,6 +149,11 @@ typedef struct board_info {
} \
} while (0)
+static inline board_info_t *to_dm9000_board(struct net_device *dev)
+{
+ return dev->priv;
+}
+
/* function declaration ------------------------------------- */
static int dm9000_probe(struct platform_device *);
static int dm9000_open(struct net_device *);
@@ -348,6 +355,64 @@ static void dm9000_poll_controller(struc
}
#endif
+/* ethtool ops */
+
+static void dm9000_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ board_info_t *dm = to_dm9000_board(dev);
+
+ strcpy(info->driver, CARDNAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->bus_info, to_platform_device(dm->dev)->name);
+}
+
+static int dm9000_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ board_info_t *dm = to_dm9000_board(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&dm->lock, flags);
+ mii_ethtool_gset(&dm->mii, cmd);
+ spin_lock_irqsave(&dm->lock, flags);
+
+ return 0;
+}
+
+static int dm9000_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ board_info_t *dm = to_dm9000_board(dev);
+ unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave(&dm->lock, flags);
+ rc = mii_ethtool_sset(&dm->mii, cmd);
+ spin_lock_irqsave(&dm->lock, flags);
+
+ return rc;
+}
+
+static int dm9000_nway_reset(struct net_device *dev)
+{
+ board_info_t *dm = to_dm9000_board(dev);
+ return mii_nway_restart(&dm->mii);
+}
+
+static u32 dm9000_get_link(struct net_device *dev)
+{
+ board_info_t *dm = to_dm9000_board(dev);
+ return mii_link_ok(&dm->mii);
+}
+
+static const struct ethtool_ops dm9000_ethtool_ops = {
+ .get_drvinfo = dm9000_get_drvinfo,
+ .get_settings = dm9000_get_settings,
+ .set_settings = dm9000_set_settings,
+ .nway_reset = dm9000_nway_reset,
+ .get_link = dm9000_get_link,
+};
+
+
/* dm9000_release_board
*
* release a board, and any mapped resources
@@ -555,6 +620,8 @@ dm9000_probe(struct platform_device *pde
ndev->stop = &dm9000_stop;
ndev->get_stats = &dm9000_get_stats;
ndev->set_multicast_list = &dm9000_hash_table;
+ ndev->ethtool_ops = &dm9000_ethtool_ops;
+
#ifdef CONFIG_NET_POLL_CONTROLLER
ndev->poll_controller = &dm9000_poll_controller;
#endif
@@ -1211,7 +1278,7 @@ static struct platform_driver dm9000_dri
static int __init
dm9000_init(void)
{
- printk(KERN_INFO "%s Ethernet Driver\n", CARDNAME);
+ printk(KERN_INFO "%s Ethernet Driver, V%s\n", CARDNAME, DRV_VERSION);
return platform_driver_register(&dm9000_driver); /* search board and register */
}
--
Ben (ben@fluff.org, http://www.fluff.org/)
'a smiley only costs 4 bytes'
next prev parent reply other threads:[~2007-11-19 21:14 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-19 20:39 [patch 00/22] DM9000 updates for 2.6.25 Ben Dooks
2007-11-19 20:39 ` [patch 01/22] NET: DM9000 use dev_xxx() instead of printk for output Ben Dooks
2007-11-24 1:35 ` Jeff Garzik
2007-11-19 20:39 ` [patch 02/22] NET: DM9000 update debugging macros to use debug level Ben Dooks
2007-11-24 1:36 ` Jeff Garzik
2007-11-19 20:39 ` [patch 03/22] NET: DM9000: Pass IRQ flags via platform data Ben Dooks
2007-11-24 1:36 ` Jeff Garzik
2007-11-19 20:39 ` Ben Dooks [this message]
2007-11-24 1:38 ` [patch 04/22] NET: DM9000: Add initial ethtool support Jeff Garzik
2007-11-19 20:39 ` [patch 05/22] NET: DM9000: Do not sleep with spinlock and IRQs held Ben Dooks
2007-11-24 1:38 ` Jeff Garzik
2007-11-19 20:39 ` [patch 06/22] NET: DM9000: Use kthread to probe MII status when device open Ben Dooks
2007-11-20 7:46 ` Christoph Hellwig
2007-11-20 10:13 ` Ben Dooks
2007-11-24 1:38 ` Jeff Garzik
2007-12-07 18:33 ` Ben Dooks
2007-11-19 20:39 ` [patch 07/22] NET: DM9000: Use msleep() instead of udelay() Ben Dooks
2007-11-24 1:39 ` Jeff Garzik
2007-12-07 15:42 ` Ben Dooks
2007-11-19 20:39 ` [patch 08/22] NET: DM9000: Remove barely used SROM array read Ben Dooks
2007-11-19 20:39 ` [patch 09/22] NET: DM9000: Add mutex to protect access Ben Dooks
2007-11-19 20:39 ` [patch 10/22] NET: DM9000: Add ethtool support for reading and writing EEPROM Ben Dooks
2007-11-19 20:39 ` [patch 11/22] NET: DM9000: Add ethtool control of msg_enable value Ben Dooks
2007-11-19 20:39 ` [patch 12/22] NET: DM9000: Remove EEPROM initialisation code Ben Dooks
2007-11-19 20:39 ` [patch 13/22] NET: DM9000: Ensure spinlock held whilst accessing EEPROM registers Ben Dooks
2007-11-19 20:39 ` [patch 14/22] NET: DM9000: Remove unnecessary changelog in header comment Ben Dooks
2007-11-24 1:41 ` Jeff Garzik
2007-11-19 20:39 ` [patch 15/22] NET: DM9000: Use netif_msg to enable debugging options Ben Dooks
2007-11-24 1:42 ` Jeff Garzik
2007-11-19 20:39 ` [patch 16/22] NET: DM9000: Fix delays used by EEPROM read and write Ben Dooks
2007-11-19 20:39 ` [patch 17/22] NET: DM9000: Remove cal_CRC() and use ether_crc_le instead Ben Dooks
2007-11-19 20:39 ` [patch 18/22] NET: DM9000: Remove redudant use of "& 0xff" Ben Dooks
2007-11-19 20:39 ` [patch 19/22] NET: DM9000: Add platform flag for no attached EEPROM Ben Dooks
2007-11-19 20:39 ` [patch 20/22] NET: DM9000: Add support for MII ioctl() calls Ben Dooks
2007-11-19 20:39 ` [patch 21/22] NET: DM9000: Update retry count whilst identifying chip Ben Dooks
2007-11-19 20:39 ` [patch 22/22] NET: DM9000: Show the MAC address source after printing MAC Ben Dooks
2007-11-24 1:43 ` Jeff Garzik
2007-12-07 18:30 ` Ben Dooks
2007-11-19 23:04 ` [patch 00/22] DM9000 updates for 2.6.25 Stephen Hemminger
2007-11-20 10:13 ` Ben Dooks
2007-11-20 17:33 ` Ben Dooks
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071119204013.403622199@fluff.org \
--to=ben-linux@fluff.org \
--cc=netdev@vger.kernel.org \
--cc=vince@simtec.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).