netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ben Dooks <ben-linux@fluff.org>
To: netdev@vger.kernel.org
Cc: vince@simtec.co.uk, Ben Dooks <ben-linux@fluff.org>
Subject: [patch 17/22] NET: DM9000: Remove cal_CRC() and use ether_crc_le instead
Date: Mon, 19 Nov 2007 20:39:27 +0000	[thread overview]
Message-ID: <20071119204015.650715145@fluff.org> (raw)
In-Reply-To: 20071119203910.687238131@fluff.org

[-- Attachment #1: simtec/simtec-drivers-net-dm9000-cleanup-removecrc.patch --]
[-- Type: text/plain, Size: 2328 bytes --]

Remove the cal_CRC as this is basically wrappering the
ether_crc_le function, and is only being used by the
multicast hash table functions.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Index: linux-2.6.23-quilt3/drivers/net/dm9000.c
===================================================================
--- linux-2.6.23-quilt3.orig/drivers/net/dm9000.c
+++ linux-2.6.23-quilt3/drivers/net/dm9000.c
@@ -1221,24 +1221,6 @@ dm9000_write_eeprom(board_info_t *db, in
 }
 
 /*
- *  Calculate the CRC valude of the Rx packet
- *  flag = 1 : return the reverse CRC (for the received packet CRC)
- *         0 : return the normal CRC (for Hash Table index)
- */
-
-static unsigned long
-cal_CRC(unsigned char *Data, unsigned int Len, u8 flag)
-{
-
-       u32 crc = ether_crc_le(Len, Data);
-
-       if (flag)
-               return ~crc;
-
-       return crc;
-}
-
-/*
  *  Set DM9000 multicast address
  */
 static void
@@ -1247,15 +1229,16 @@ dm9000_hash_table(struct net_device *dev
 	board_info_t *db = (board_info_t *) dev->priv;
 	struct dev_mc_list *mcptr = dev->mc_list;
 	int mc_cnt = dev->mc_count;
+	int i, oft;
 	u32 hash_val;
-	u16 i, oft, hash_table[4];
+	u16 hash_table[4];
 	unsigned long flags;
 
 	dm9000_dbg(db, 1, "entering %s\n", __func__);
 
-	spin_lock_irqsave(&db->lock,flags);
+	spin_lock_irqsave(&db->lock, flags);
 
-	for (i = 0, oft = 0x10; i < 6; i++, oft++)
+	for (i = 0, oft = DM9000_PAR; i < 6; i++, oft++)
 		iow(db, oft, dev->dev_addr[i]);
 
 	/* Clear Hash Table */
@@ -1267,17 +1250,17 @@ dm9000_hash_table(struct net_device *dev
 
 	/* the multicast address in Hash Table : 64 bits */
 	for (i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
-		hash_val = cal_CRC((char *) mcptr->dmi_addr, 6, 0) & 0x3f;
+		hash_val = ether_crc_le(6, mcptr->dmi_addr) & 0x3f;
 		hash_table[hash_val / 16] |= (u16) 1 << (hash_val % 16);
 	}
 
 	/* Write the hash table to MAC MD table */
-	for (i = 0, oft = 0x16; i < 4; i++) {
-		iow(db, oft++, hash_table[i] & 0xff);
-		iow(db, oft++, (hash_table[i] >> 8) & 0xff);
+	for (i = 0, oft = DM9000_MAR; i < 4; i++) {
+		iow(db, oft++, hash_table[i]);
+		iow(db, oft++, hash_table[i] >> 8);
 	}
 
-	spin_unlock_irqrestore(&db->lock,flags);
+	spin_unlock_irqrestore(&db->lock, flags);
 }
 
 

-- 
Ben (ben@fluff.org, http://www.fluff.org/)

  'a smiley only costs 4 bytes'

  parent reply	other threads:[~2007-11-19 21:14 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-11-19 20:39 [patch 00/22] DM9000 updates for 2.6.25 Ben Dooks
2007-11-19 20:39 ` [patch 01/22] NET: DM9000 use dev_xxx() instead of printk for output Ben Dooks
2007-11-24  1:35   ` Jeff Garzik
2007-11-19 20:39 ` [patch 02/22] NET: DM9000 update debugging macros to use debug level Ben Dooks
2007-11-24  1:36   ` Jeff Garzik
2007-11-19 20:39 ` [patch 03/22] NET: DM9000: Pass IRQ flags via platform data Ben Dooks
2007-11-24  1:36   ` Jeff Garzik
2007-11-19 20:39 ` [patch 04/22] NET: DM9000: Add initial ethtool support Ben Dooks
2007-11-24  1:38   ` Jeff Garzik
2007-11-19 20:39 ` [patch 05/22] NET: DM9000: Do not sleep with spinlock and IRQs held Ben Dooks
2007-11-24  1:38   ` Jeff Garzik
2007-11-19 20:39 ` [patch 06/22] NET: DM9000: Use kthread to probe MII status when device open Ben Dooks
2007-11-20  7:46   ` Christoph Hellwig
2007-11-20 10:13     ` Ben Dooks
2007-11-24  1:38   ` Jeff Garzik
2007-12-07 18:33     ` Ben Dooks
2007-11-19 20:39 ` [patch 07/22] NET: DM9000: Use msleep() instead of udelay() Ben Dooks
2007-11-24  1:39   ` Jeff Garzik
2007-12-07 15:42     ` Ben Dooks
2007-11-19 20:39 ` [patch 08/22] NET: DM9000: Remove barely used SROM array read Ben Dooks
2007-11-19 20:39 ` [patch 09/22] NET: DM9000: Add mutex to protect access Ben Dooks
2007-11-19 20:39 ` [patch 10/22] NET: DM9000: Add ethtool support for reading and writing EEPROM Ben Dooks
2007-11-19 20:39 ` [patch 11/22] NET: DM9000: Add ethtool control of msg_enable value Ben Dooks
2007-11-19 20:39 ` [patch 12/22] NET: DM9000: Remove EEPROM initialisation code Ben Dooks
2007-11-19 20:39 ` [patch 13/22] NET: DM9000: Ensure spinlock held whilst accessing EEPROM registers Ben Dooks
2007-11-19 20:39 ` [patch 14/22] NET: DM9000: Remove unnecessary changelog in header comment Ben Dooks
2007-11-24  1:41   ` Jeff Garzik
2007-11-19 20:39 ` [patch 15/22] NET: DM9000: Use netif_msg to enable debugging options Ben Dooks
2007-11-24  1:42   ` Jeff Garzik
2007-11-19 20:39 ` [patch 16/22] NET: DM9000: Fix delays used by EEPROM read and write Ben Dooks
2007-11-19 20:39 ` Ben Dooks [this message]
2007-11-19 20:39 ` [patch 18/22] NET: DM9000: Remove redudant use of "& 0xff" Ben Dooks
2007-11-19 20:39 ` [patch 19/22] NET: DM9000: Add platform flag for no attached EEPROM Ben Dooks
2007-11-19 20:39 ` [patch 20/22] NET: DM9000: Add support for MII ioctl() calls Ben Dooks
2007-11-19 20:39 ` [patch 21/22] NET: DM9000: Update retry count whilst identifying chip Ben Dooks
2007-11-19 20:39 ` [patch 22/22] NET: DM9000: Show the MAC address source after printing MAC Ben Dooks
2007-11-24  1:43   ` Jeff Garzik
2007-12-07 18:30     ` Ben Dooks
2007-11-19 23:04 ` [patch 00/22] DM9000 updates for 2.6.25 Stephen Hemminger
2007-11-20 10:13   ` Ben Dooks
2007-11-20 17:33 ` Ben Dooks

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20071119204015.650715145@fluff.org \
    --to=ben-linux@fluff.org \
    --cc=netdev@vger.kernel.org \
    --cc=vince@simtec.co.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).