From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: <jgarzik@pobox.com>
Cc: <netdev@vger.kernel.org>, <linuxppc-dev@ozlabs.org>
Subject: [PATCH 1/11] ibm_newemac: Add BCM5248 and Marvell 88E1111 PHY support
Date: Fri, 30 Nov 2007 16:40:23 +1100 [thread overview]
Message-ID: <20071130054126.39BDCDDE0A@ozlabs.org> (raw)
In-Reply-To: <1196401223.5661.297518056501.qpush@grosgo>
From: Stefan Roese <sr@denx.de>
This patch adds BCM5248 and Marvell 88E1111 PHY support to NEW EMAC driver.
These PHY chips are used on PowerPC 440EPx boards.
The PHY code is based on the previous work by Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
--- linux.orig/drivers/net/ibm_newemac/phy.c 2007-06-15 21:45:18.000000000 +0400
+++ linux/drivers/net/ibm_newemac/phy.c 2007-06-15 20:45:15.000000000 +0400
@@ -306,8 +306,47 @@
.ops = &cis8201_phy_ops
};
+static struct mii_phy_def bcm5248_phy_def = {
+
+ .phy_id = 0x0143bc00,
+ .phy_id_mask = 0x0ffffff0,
+ .name = "BCM5248 10/100 SMII Ethernet",
+ .ops = &generic_phy_ops
+};
+
+static int m88e1111_init(struct mii_phy *phy)
+{
+ printk("%s: Marvell 88E1111 Ethernet\n", __FUNCTION__);
+ phy_write(phy, 0x14, 0x0ce3);
+ phy_write(phy, 0x18, 0x4101);
+ phy_write(phy, 0x09, 0x0e00);
+ phy_write(phy, 0x04, 0x01e1);
+ phy_write(phy, 0x00, 0x9140);
+ phy_write(phy, 0x00, 0x1140);
+
+ return 0;
+}
+
+static struct mii_phy_ops m88e1111_phy_ops = {
+ .init = m88e1111_init,
+ .setup_aneg = genmii_setup_aneg,
+ .setup_forced = genmii_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = genmii_read_link
+};
+
+static struct mii_phy_def m88e1111_phy_def = {
+
+ .phy_id = 0x01410CC0,
+ .phy_id_mask = 0x0ffffff0,
+ .name = "Marvell 88E1111 Ethernet",
+ .ops = &m88e1111_phy_ops,
+};
+
static struct mii_phy_def *mii_phy_table[] = {
&cis8201_phy_def,
+ &bcm5248_phy_def,
+ &m88e1111_phy_def,
&genmii_phy_def,
NULL
};
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
next prev parent reply other threads:[~2007-11-30 5:41 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-30 5:40 [PATCH 0/11] ibm_newemac: Candidate patches for 2.6.25 Benjamin Herrenschmidt
2007-11-30 5:40 ` Benjamin Herrenschmidt [this message]
2007-11-30 7:56 ` [PATCH 1/11] ibm_newemac: Add BCM5248 and Marvell 88E1111 PHY support Christoph Hellwig
2007-11-30 8:03 ` Benjamin Herrenschmidt
2007-11-30 14:27 ` Olof Johansson
2007-11-30 14:30 ` Geert Uytterhoeven
2007-11-30 5:40 ` [PATCH 2/11] ibm_newemac: Add ET1011c " Benjamin Herrenschmidt
2007-11-30 14:29 ` Olof Johansson
2007-11-30 20:59 ` Benjamin Herrenschmidt
2007-11-30 21:30 ` Olof Johansson
2007-11-30 21:56 ` Kumar Gala
2007-11-30 5:40 ` [PATCH 3/11] ibm_newemac: Fix ZMII refcounting bug Benjamin Herrenschmidt
2007-11-30 5:40 ` [PATCH 4/11] ibm_newemac: Workaround reset timeout when no link Benjamin Herrenschmidt
2007-11-30 5:40 ` [PATCH 5/11] ibm_newemac: Cleanup/Fix RGMII MDIO support detection Benjamin Herrenschmidt
2007-11-30 5:40 ` [PATCH 6/11] ibm_newemac: Cleanup/fix support for STACR register variants Benjamin Herrenschmidt
2007-11-30 5:40 ` [PATCH 7/11] ibm_newemac: Skip EMACs that are marked unused by the firmware Benjamin Herrenschmidt
2007-11-30 5:40 ` [PATCH 8/11] ibm_newemac: Correct opb_bus_freq value Benjamin Herrenschmidt
2007-11-30 5:40 ` [PATCH 9/11] ibm_newemac: Fix typo reading TAH channel info Benjamin Herrenschmidt
2007-11-30 5:40 ` [PATCH 10/11] ibm_newemac: Call dev_set_drvdata() before tah_reset() Benjamin Herrenschmidt
2007-11-30 5:40 ` [PATCH 11/11] emac: Update file headers copyright notices Benjamin Herrenschmidt
-- strict thread matches above, loose matches on Subject: below --
2007-12-05 0:14 [PATCH 1/11] ibm_newemac: Add BCM5248 and Marvell 88E1111 PHY support Benjamin Herrenschmidt
2007-12-07 20:09 ` Jeff Garzik
2007-12-09 7:08 ` Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071130054126.39BDCDDE0A@ozlabs.org \
--to=benh@kernel.crashing.org \
--cc=jgarzik@pobox.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).