From: mschmidt@redhat.com
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, kaber@trash.net, mmaslano@redhat.com
Subject: [patch 1/2] ip_gre: Rebinding of GRE tunnels to other interfaces
Date: Thu, 13 Dec 2007 14:37:49 +0100 [thread overview]
Message-ID: <20071213133922.223489455@redhat.com> (raw)
In-Reply-To: 20071213133748.862042979@redhat.com
[-- Attachment #1: ip_gre-chgtunnel.patch --]
[-- Type: text/plain, Size: 4605 bytes --]
This is similar to the change already done for IPIP tunnels.
Once created, a GRE tunnel can't be bound to another device.
To reproduce:
# create a tunnel:
ip tunnel add tunneltest0 mode gre remote 10.0.0.1 dev eth0
# try to change the bounding device from eth0 to eth1:
ip tunnel change tunneltest0 dev eth1
# show the result:
ip tunnel show tunneltest0
tunneltest0: gre/ip remote 10.0.0.1 local any dev eth0 ttl inherit
Notice the bound device has not changed from eth0 to eth1.
This patch fixes it. When changing the binding, it also recalculates the
MTU according to the new bound device's MTU.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Index: linus-kernel.git/net/ipv4/ip_gre.c
===================================================================
--- linus-kernel.git.orig/net/ipv4/ip_gre.c
+++ linus-kernel.git/net/ipv4/ip_gre.c
@@ -896,6 +896,59 @@ tx_error:
return 0;
}
+static void ipgre_tunnel_bind_dev(struct net_device *dev)
+{
+ struct net_device *tdev = NULL;
+ struct ip_tunnel *tunnel;
+ struct iphdr *iph;
+ int hlen = LL_MAX_HEADER;
+ int mtu = ETH_DATA_LEN;
+ int addend = sizeof(struct iphdr) + 4;
+
+ tunnel = netdev_priv(dev);
+ iph = &tunnel->parms.iph;
+
+ /* Guess output device to choose reasonable mtu and hard_header_len */
+
+ if (iph->daddr) {
+ struct flowi fl = { .oif = tunnel->parms.link,
+ .nl_u = { .ip4_u =
+ { .daddr = iph->daddr,
+ .saddr = iph->saddr,
+ .tos = RT_TOS(iph->tos) } },
+ .proto = IPPROTO_GRE };
+ struct rtable *rt;
+ if (!ip_route_output_key(&rt, &fl)) {
+ tdev = rt->u.dst.dev;
+ ip_rt_put(rt);
+ }
+ dev->flags |= IFF_POINTOPOINT;
+ }
+
+ if (!tdev && tunnel->parms.link)
+ tdev = __dev_get_by_index(&init_net, tunnel->parms.link);
+
+ if (tdev) {
+ hlen = tdev->hard_header_len;
+ mtu = tdev->mtu;
+ }
+ dev->iflink = tunnel->parms.link;
+
+ /* Precalculate GRE options length */
+ if (tunnel->parms.o_flags&(GRE_CSUM|GRE_KEY|GRE_SEQ)) {
+ if (tunnel->parms.o_flags&GRE_CSUM)
+ addend += 4;
+ if (tunnel->parms.o_flags&GRE_KEY)
+ addend += 4;
+ if (tunnel->parms.o_flags&GRE_SEQ)
+ addend += 4;
+ }
+ dev->hard_header_len = hlen + addend;
+ dev->mtu = mtu - addend;
+ tunnel->hlen = addend;
+
+}
+
static int
ipgre_tunnel_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd)
{
@@ -983,6 +1036,11 @@ ipgre_tunnel_ioctl (struct net_device *d
t->parms.iph.ttl = p.iph.ttl;
t->parms.iph.tos = p.iph.tos;
t->parms.iph.frag_off = p.iph.frag_off;
+ if (t->parms.link != p.link) {
+ t->parms.link = p.link;
+ ipgre_tunnel_bind_dev(dev);
+ netdev_state_change(dev);
+ }
}
if (copy_to_user(ifr->ifr_ifru.ifru_data, &t->parms, sizeof(p)))
err = -EFAULT;
@@ -1162,12 +1220,8 @@ static void ipgre_tunnel_setup(struct ne
static int ipgre_tunnel_init(struct net_device *dev)
{
- struct net_device *tdev = NULL;
struct ip_tunnel *tunnel;
struct iphdr *iph;
- int hlen = LL_MAX_HEADER;
- int mtu = ETH_DATA_LEN;
- int addend = sizeof(struct iphdr) + 4;
tunnel = netdev_priv(dev);
iph = &tunnel->parms.iph;
@@ -1178,23 +1232,9 @@ static int ipgre_tunnel_init(struct net_
memcpy(dev->dev_addr, &tunnel->parms.iph.saddr, 4);
memcpy(dev->broadcast, &tunnel->parms.iph.daddr, 4);
- /* Guess output device to choose reasonable mtu and hard_header_len */
+ ipgre_tunnel_bind_dev(dev);
if (iph->daddr) {
- struct flowi fl = { .oif = tunnel->parms.link,
- .nl_u = { .ip4_u =
- { .daddr = iph->daddr,
- .saddr = iph->saddr,
- .tos = RT_TOS(iph->tos) } },
- .proto = IPPROTO_GRE };
- struct rtable *rt;
- if (!ip_route_output_key(&rt, &fl)) {
- tdev = rt->u.dst.dev;
- ip_rt_put(rt);
- }
-
- dev->flags |= IFF_POINTOPOINT;
-
#ifdef CONFIG_NET_IPGRE_BROADCAST
if (MULTICAST(iph->daddr)) {
if (!iph->saddr)
@@ -1205,31 +1245,9 @@ static int ipgre_tunnel_init(struct net_
dev->stop = ipgre_close;
}
#endif
- } else {
+ } else
dev->header_ops = &ipgre_header_ops;
- }
-
- if (!tdev && tunnel->parms.link)
- tdev = __dev_get_by_index(&init_net, tunnel->parms.link);
-
- if (tdev) {
- hlen = tdev->hard_header_len;
- mtu = tdev->mtu;
- }
- dev->iflink = tunnel->parms.link;
- /* Precalculate GRE options length */
- if (tunnel->parms.o_flags&(GRE_CSUM|GRE_KEY|GRE_SEQ)) {
- if (tunnel->parms.o_flags&GRE_CSUM)
- addend += 4;
- if (tunnel->parms.o_flags&GRE_KEY)
- addend += 4;
- if (tunnel->parms.o_flags&GRE_SEQ)
- addend += 4;
- }
- dev->hard_header_len = hlen + addend;
- dev->mtu = mtu - addend;
- tunnel->hlen = addend;
return 0;
}
--
next prev parent reply other threads:[~2007-12-13 13:39 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-13 13:37 [patch 0/2] rebinding tunnels to interfaces mschmidt
2007-12-13 13:37 ` mschmidt [this message]
2007-12-13 17:47 ` [patch 1/2] ip_gre: Rebinding of GRE tunnels to other interfaces David Miller
2007-12-13 13:37 ` [patch 2/2] ipv6/sit: Rebinding of SIT " mschmidt
2007-12-13 17:47 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071213133922.223489455@redhat.com \
--to=mschmidt@redhat.com \
--cc=davem@davemloft.net \
--cc=kaber@trash.net \
--cc=mmaslano@redhat.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).