From: Olof Johansson <olof@lixom.net>
To: jgarzik@pobox.com
Cc: netdev@vger.kernel.org
Subject: [PATCH 1/3] pasemi_mac: Add support for changing mac address
Date: Wed, 23 Jan 2008 13:56:19 -0600 [thread overview]
Message-ID: <20080123195619.GB32380@lixom.net> (raw)
In-Reply-To: <20080123195537.GA32380@lixom.net>
Straightforward. It used to be hardcoded and impossible to override
with ifconfig.
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/drivers/net/pasemi_mac.c b/drivers/net/pasemi_mac.c
index bb88a41..59dea3f 100644
--- a/drivers/net/pasemi_mac.c
+++ b/drivers/net/pasemi_mac.c
@@ -221,6 +221,33 @@ static int pasemi_get_mac_addr(struct pasemi_mac *mac)
return 0;
}
+static int pasemi_mac_set_mac_addr(struct net_device *dev, void *p)
+{
+ struct pasemi_mac *mac = netdev_priv(dev);
+ struct sockaddr *addr = p;
+ unsigned int adr0, adr1;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EINVAL;
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+ adr0 = dev->dev_addr[2] << 24 |
+ dev->dev_addr[3] << 16 |
+ dev->dev_addr[4] << 8 |
+ dev->dev_addr[5];
+ adr1 = read_mac_reg(mac, PAS_MAC_CFG_ADR1);
+ adr1 &= ~0xffff;
+ adr1 |= dev->dev_addr[0] << 8 | dev->dev_addr[1];
+
+ pasemi_mac_intf_disable(mac);
+ write_mac_reg(mac, PAS_MAC_CFG_ADR0, adr0);
+ write_mac_reg(mac, PAS_MAC_CFG_ADR1, adr1);
+ pasemi_mac_intf_enable(mac);
+
+ return 0;
+}
+
static int get_skb_hdr(struct sk_buff *skb, void **iphdr,
void **tcph, u64 *hdr_flags, void *data)
{
@@ -1475,6 +1502,7 @@ pasemi_mac_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
dev->stop = pasemi_mac_close;
dev->hard_start_xmit = pasemi_mac_start_tx;
dev->set_multicast_list = pasemi_mac_set_rx_mode;
+ dev->set_mac_address = pasemi_mac_set_mac_addr;
if (err)
goto out;
diff --git a/drivers/net/pasemi_mac.h b/drivers/net/pasemi_mac.h
index 8bee2a6..39d3259 100644
--- a/drivers/net/pasemi_mac.h
+++ b/drivers/net/pasemi_mac.h
@@ -96,6 +96,8 @@ struct pasemi_mac_buffer {
/* MAC CFG register offsets */
enum {
PAS_MAC_CFG_PCFG = 0x80,
+ PAS_MAC_CFG_ADR0 = 0x8c,
+ PAS_MAC_CFG_ADR1 = 0x90,
PAS_MAC_CFG_TXP = 0x98,
PAS_MAC_IPC_CHNL = 0x208,
};
next prev parent reply other threads:[~2008-01-23 19:53 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-23 19:55 [PATCH 0/3] A few more pasemi_mac patches for 2.6.25 Olof Johansson
2008-01-23 19:56 ` Olof Johansson [this message]
2008-02-01 18:42 ` [PATCH 1/3] pasemi_mac: Add support for changing mac address Jeff Garzik
2008-01-23 19:56 ` [PATCH 2/3] pasemi_mac: add support for setting MTU Olof Johansson
2008-01-23 19:57 ` [PATCH 3/3] pasemi_mac: Disable interface on close Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080123195619.GB32380@lixom.net \
--to=olof@lixom.net \
--cc=jgarzik@pobox.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).