From: Rusty Russell <rusty@rustcorp.com.au>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: jeff@garzik.org, netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] BUG_ON() bad input to request_irq
Date: Thu, 24 Jan 2008 09:15:10 +1100 [thread overview]
Message-ID: <200801240915.11216.rusty@rustcorp.com.au> (raw)
In-Reply-To: <20080123140414.e1ff2263.akpm@linux-foundation.org>
On Thursday 24 January 2008 09:04:14 Andrew Morton wrote:
> > On Thu, 17 Jan 2008 17:59:58 +1100 Rusty Russell <rusty@rustcorp.com.au>
> If no driver is passing in args which will trigger this BUG, we presumably
> don't need the patch.
You're only thinking of current code. The BUG catches future changes, too.
> If some driver _is_ passing in args which will trigger these BUGs then it is
> presumably working OK anyway. Taking a working system and making it go BUG
> is likely to upset people.
That's why I did the audit. See patch below which preceeded it, which Jeff
hasn't responded to. Breaking his drivers might make him notice :)
> IOW: WARN_ON, please.
At end of cycles, sure, but not for 2.6.25: they're even more invisible than
deprecated warnings :(
Rusty.
===
request_irq() always returns -EINVAL with a NULL handler.
I assume that these ancient network drivers were trying to find out if
an irq is available. eepro.c expecting +EBUSY was doubly wrong.
Request_irq should BUG() on bad input, and these would have been found
earlier.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
drivers/net/3c503.c | 2 +-
drivers/net/e2100.c | 2 +-
drivers/net/eepro.c | 2 +-
drivers/net/hp.c | 2 +-
kernel/irq/manage.c | 1 +
5 files changed, 5 insertions(+), 4 deletions(-)
diff -r 0b7e4fbb6238 drivers/net/3c503.c
--- a/drivers/net/3c503.c Thu Jan 17 15:49:34 2008 +1100
+++ b/drivers/net/3c503.c Thu Jan 17 16:40:28 2008 +1100
@@ -379,7 +379,7 @@ el2_open(struct net_device *dev)
outb(EGACFR_NORM, E33G_GACFR); /* Enable RAM and interrupts. */
do {
- if (request_irq (*irqp, NULL, 0, "bogus", dev) != -EBUSY) {
+ if (can_request_irq(*irqp, 0)) {
/* Twinkle the interrupt, and check if it's seen. */
unsigned long cookie = probe_irq_on();
outb_p(0x04 << ((*irqp == 9) ? 2 : *irqp), E33G_IDCFR);
diff -r 0b7e4fbb6238 drivers/net/e2100.c
--- a/drivers/net/e2100.c Thu Jan 17 15:49:34 2008 +1100
+++ b/drivers/net/e2100.c Thu Jan 17 16:40:28 2008 +1100
@@ -202,7 +202,7 @@ static int __init e21_probe1(struct net_
if (dev->irq < 2) {
int irqlist[] = {15,11,10,12,5,9,3,4}, i;
for (i = 0; i < 8; i++)
- if (request_irq (irqlist[i], NULL, 0, "bogus", NULL) != -EBUSY) {
+ if (can_request_irq(irqlist[i], 0)) {
dev->irq = irqlist[i];
break;
}
diff -r 0b7e4fbb6238 drivers/net/eepro.c
--- a/drivers/net/eepro.c Thu Jan 17 15:49:34 2008 +1100
+++ b/drivers/net/eepro.c Thu Jan 17 16:40:28 2008 +1100
@@ -914,7 +914,7 @@ static int eepro_grab_irq(struct net_dev
eepro_sw2bank0(ioaddr); /* Switch back to Bank 0 */
- if (request_irq (*irqp, NULL, IRQF_SHARED, "bogus", dev) != EBUSY) {
+ if (can_request_irq(*irqp, IRQF_SHARED)) {
unsigned long irq_mask;
/* Twinkle the interrupt, and check if it's seen */
irq_mask = probe_irq_on();
diff -r 0b7e4fbb6238 drivers/net/hp.c
--- a/drivers/net/hp.c Thu Jan 17 15:49:34 2008 +1100
+++ b/drivers/net/hp.c Thu Jan 17 16:40:28 2008 +1100
@@ -170,7 +170,7 @@ static int __init hp_probe1(struct net_d
int *irqp = wordmode ? irq_16list : irq_8list;
do {
int irq = *irqp;
- if (request_irq (irq, NULL, 0, "bogus", NULL) != -EBUSY) {
+ if (can_request_irq(irq, 0)) {
unsigned long cookie = probe_irq_on();
/* Twinkle the interrupt, and check if it's seen. */
outb_p(irqmap[irq] | HP_RUN, ioaddr + HP_CONFIGURE);
diff -r 0b7e4fbb6238 kernel/irq/manage.c
--- a/kernel/irq/manage.c Thu Jan 17 15:49:34 2008 +1100
+++ b/kernel/irq/manage.c Thu Jan 17 16:40:28 2008 +1100
@@ -252,6 +252,7 @@ int can_request_irq(unsigned int irq, un
return !action;
}
+EXPORT_SYMBOL(can_request_irq);
void compat_irq_chip_set_default_handler(struct irq_desc *desc)
{
next prev parent reply other threads:[~2008-01-23 22:16 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-17 6:57 [PATCH] request_irq() always returns -EINVAL with a NULL handler Rusty Russell
2008-01-17 6:59 ` [PATCH] BUG_ON() bad input to request_irq Rusty Russell
2008-01-23 22:04 ` Andrew Morton
2008-01-23 22:15 ` Rusty Russell [this message]
2008-01-17 16:22 ` [PATCH] request_irq() always returns -EINVAL with a NULL handler Stephen Hemminger
2008-02-03 6:15 ` Andrew Morton
2008-02-04 5:55 ` Rusty Russell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200801240915.11216.rusty@rustcorp.com.au \
--to=rusty@rustcorp.com.au \
--cc=akpm@linux-foundation.org \
--cc=jeff@garzik.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).