From: David Brownell <david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
To: Jussi Kivilinna <jussi.kivilinna-E01nCVcF24I@public.gmane.org>
Cc: linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
bjd-a1rhEgazXTw@public.gmane.org,
netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 10/14] [rndis_host] Add rndis_early_init function pointer to 'struct rndis_data'.
Date: Thu, 24 Jan 2008 17:10:35 -0800 [thread overview]
Message-ID: <200801241710.35528.david-b@pacbell.net> (raw)
In-Reply-To: <20080120001438.25718.96722.stgit-q/85JClnwdg@public.gmane.org>
On Saturday 19 January 2008, Jussi Kivilinna wrote:
> Function pointer is for rndis minidrivers that need to do work on device right
> after RNDIS_INIT. For example setting device specific configuration parameters
> with OID_GEN_RNDIS_CONFIG_PARAMETER.
>
> Signed-off-by: Jussi Kivilinna <jussi.kivilinna-E01nCVcF24I@public.gmane.org>
Could this -- and #11/14 -- instead be generalized a bit,
so they're not RNDIS-specific? At least in name; the
only user for now would be the rndis_host code.
The generalization would presumably be "early_init" and
"link_change", paired with doc comments reflecting that
they're usable by any driver stack built over the usbnet
framework core.
There's no point IMO to having generalizable hooks be
restricted this way.
- Dave
> ---
>
> drivers/net/usb/rndis_host.c | 6 ++++++
> drivers/net/usb/usbnet.h | 3 +++
> 2 files changed, 9 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
> index 1d6bf0a..22e5ca1 100644
> --- a/drivers/net/usb/rndis_host.c
> +++ b/drivers/net/usb/rndis_host.c
> @@ -336,6 +336,12 @@ int generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf)
> dev->hard_mtu, tmp, dev->rx_urb_size,
> 1 << le32_to_cpu(u.init_c->packet_alignment));
>
> + /* module has some device initialization code needs to be done right
> + * after RNDIS_INIT */
> + if (dev->driver_info->rndis_early_init &&
> + dev->driver_info->rndis_early_init(dev) != 0)
> + goto halt_fail_and_release;
> +
> /* Get designated host ethernet address */
> reply_len = ETH_ALEN;
> retval = rndis_query(dev, intf, u.buf, OID_802_3_PERMANENT_ADDRESS,
> diff --git a/drivers/net/usb/usbnet.h b/drivers/net/usb/usbnet.h
> index 0b4bf09..2bc5f76 100644
> --- a/drivers/net/usb/usbnet.h
> +++ b/drivers/net/usb/usbnet.h
> @@ -116,6 +116,9 @@ struct driver_info {
> struct sk_buff *(*tx_fixup)(struct usbnet *dev,
> struct sk_buff *skb, gfp_t flags);
>
> + /* rndis minidriver early initialization code, can sleep */
> + int (*rndis_early_init)(struct usbnet *dev);
> +
> /* for new devices, use the descriptor-reading code instead */
> int in; /* rx endpoint */
> int out; /* tx endpoint */
>
next prev parent reply other threads:[~2008-01-25 1:10 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-20 0:14 [PATCH 10/14] [rndis_host] Add rndis_early_init function pointer to 'struct rndis_data' Jussi Kivilinna
[not found] ` <20080120001438.25718.96722.stgit-q/85JClnwdg@public.gmane.org>
2008-01-25 1:10 ` David Brownell [this message]
[not found] ` <200801241710.35528.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-01-25 13:14 ` Jussi Kivilinna
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200801241710.35528.david-b@pacbell.net \
--to=david-b-ybekhbn/0ldr7s880joybq@public.gmane.org \
--cc=bjd-a1rhEgazXTw@public.gmane.org \
--cc=jussi.kivilinna-E01nCVcF24I@public.gmane.org \
--cc=linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).