From: Ben Dooks <ben-linux@fluff.org>
To: netdev@vger.kernel.org
Cc: jeff@garzik.org, akpm@linux-foundation.org, daniel@caiaq.de,
laurentp@cse-semaphore.com, Ben Dooks <ben-linux@fluff.org>
Subject: [PATCH 07/24 for-2.6.25] DM9000: Add initial ethtool support
Date: Tue, 05 Feb 2008 00:02:06 +0000 [thread overview]
Message-ID: <20080205000815.759244139@fluff.org.uk> (raw)
In-Reply-To: 20080205000159.432081941@fluff.org.uk
[-- Attachment #1: simtec/simtec-drivers-net-dm9000-ethtool.patch --]
[-- Type: text/plain, Size: 3309 bytes --]
Add support for ethtool operations for the DM9000.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Index: linux-2.6.24-quilt3/drivers/net/dm9000.c
===================================================================
--- linux-2.6.24-quilt3.orig/drivers/net/dm9000.c
+++ linux-2.6.24-quilt3/drivers/net/dm9000.c
@@ -63,6 +63,7 @@
#include <linux/spinlock.h>
#include <linux/crc32.h>
#include <linux/mii.h>
+#include <linux/ethtool.h>
#include <linux/dm9000.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
@@ -80,6 +81,7 @@
#define CARDNAME "dm9000"
#define PFX CARDNAME ": "
+#define DRV_VERSION "1.30"
#ifdef CONFIG_BLACKFIN
#define readsb insb
@@ -145,6 +147,11 @@ typedef struct board_info {
} \
} while (0)
+static inline board_info_t *to_dm9000_board(struct net_device *dev)
+{
+ return dev->priv;
+}
+
/* function declaration ------------------------------------- */
static int dm9000_probe(struct platform_device *);
static int dm9000_open(struct net_device *);
@@ -342,6 +349,64 @@ static void dm9000_poll_controller(struc
}
#endif
+/* ethtool ops */
+
+static void dm9000_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ board_info_t *dm = to_dm9000_board(dev);
+
+ strcpy(info->driver, CARDNAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->bus_info, to_platform_device(dm->dev)->name);
+}
+
+static int dm9000_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ board_info_t *dm = to_dm9000_board(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&dm->lock, flags);
+ mii_ethtool_gset(&dm->mii, cmd);
+ spin_lock_irqsave(&dm->lock, flags);
+
+ return 0;
+}
+
+static int dm9000_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ board_info_t *dm = to_dm9000_board(dev);
+ unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave(&dm->lock, flags);
+ rc = mii_ethtool_sset(&dm->mii, cmd);
+ spin_lock_irqsave(&dm->lock, flags);
+
+ return rc;
+}
+
+static int dm9000_nway_reset(struct net_device *dev)
+{
+ board_info_t *dm = to_dm9000_board(dev);
+ return mii_nway_restart(&dm->mii);
+}
+
+static u32 dm9000_get_link(struct net_device *dev)
+{
+ board_info_t *dm = to_dm9000_board(dev);
+ return mii_link_ok(&dm->mii);
+}
+
+static const struct ethtool_ops dm9000_ethtool_ops = {
+ .get_drvinfo = dm9000_get_drvinfo,
+ .get_settings = dm9000_get_settings,
+ .set_settings = dm9000_set_settings,
+ .nway_reset = dm9000_nway_reset,
+ .get_link = dm9000_get_link,
+};
+
+
/* dm9000_release_board
*
* release a board, and any mapped resources
@@ -546,6 +611,8 @@ dm9000_probe(struct platform_device *pde
ndev->watchdog_timeo = msecs_to_jiffies(watchdog);
ndev->stop = &dm9000_stop;
ndev->set_multicast_list = &dm9000_hash_table;
+ ndev->ethtool_ops = &dm9000_ethtool_ops;
+
#ifdef CONFIG_NET_POLL_CONTROLLER
ndev->poll_controller = &dm9000_poll_controller;
#endif
@@ -1170,7 +1237,7 @@ static struct platform_driver dm9000_dri
static int __init
dm9000_init(void)
{
- printk(KERN_INFO "%s Ethernet Driver\n", CARDNAME);
+ printk(KERN_INFO "%s Ethernet Driver, V%s\n", CARDNAME, DRV_VERSION);
return platform_driver_register(&dm9000_driver); /* search board and register */
}
--
Ben (ben@fluff.org, http://www.fluff.org/)
'a smiley only costs 4 bytes'
next prev parent reply other threads:[~2008-02-05 0:08 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-05 0:01 [PATCH 00/24 for-2.6.25] DM9000 updates for 2.6.25 Ben Dooks
2008-02-05 0:02 ` [PATCH 01/24 for-2.6.25] DM9000: Fix endian-ness of data accesses. Patch from: Laurent Pinchart <laurentp@cse-semaphore.com> Ben Dooks
2008-02-05 0:13 ` [PATCH 01/24 for-2.6.25] DM9000: Fix endian-ness of data accesses Ben Dooks
2008-02-05 22:57 ` [PATCH 01/24 for-2.6.25] DM9000: Fix endian-ness of data accesses. Patch from: Laurent Pinchart <laurentp@cse-semaphore.com> Francois Romieu
2008-02-06 11:46 ` Jeff Garzik
2008-02-07 13:28 ` Laurent Pinchart
2008-02-07 14:54 ` Jeff Garzik
2008-02-07 13:30 ` Christoph Hellwig
2008-02-05 0:02 ` [PATCH 02/24 for-2.6.25] DM9000: Add platform data to specify external phy " Ben Dooks
2008-02-05 0:14 ` [PATCH 02/24 for-2.6.25] DM9000: Add platform data to specify external phy Ben Dooks
2008-02-05 0:02 ` [PATCH 03/24 for-2.6.25] DM9000 use dev_xxx() instead of printk for output Ben Dooks
2008-02-05 0:02 ` [PATCH 04/24 for-2.6.25] DM9000 update debugging macros to use debug level Ben Dooks
2008-02-05 0:02 ` [PATCH 05/24 for-2.6.25] DM9000: Pass IRQ flags via platform resources Ben Dooks
2008-02-05 0:02 ` [PATCH 06/24 for-2.6.25] DM9000: Remove old timer based poll routines Ben Dooks
2008-02-05 0:02 ` Ben Dooks [this message]
2008-02-05 22:50 ` [PATCH 07/24 for-2.6.25] DM9000: Add initial ethtool support Francois Romieu
2008-02-06 22:03 ` Ben Dooks
2008-02-06 21:52 ` Francois Romieu
2008-02-06 22:16 ` Ben Dooks
2008-02-05 0:02 ` [PATCH 08/24 for-2.6.25] DM9000: Do not sleep with spinlock and IRQs held Ben Dooks
2008-02-05 0:02 ` [PATCH 09/24 for-2.6.25] DM9000: Use msleep() instead of udelay() Ben Dooks
2008-02-05 0:02 ` [PATCH 10/24 for-2.6.25] DM9000: Remove barely used SROM array read Ben Dooks
2008-02-05 0:02 ` [PATCH 11/24 for-2.6.25] DM9000: Add mutex to protect access Ben Dooks
2008-02-05 0:02 ` [PATCH 12/24 for-2.6.25] DM9000: Add ethtool support for reading and writing EEPROM Ben Dooks
2008-02-05 0:02 ` [PATCH 13/24 for-2.6.25] DM9000: Add ethtool control of msg_enable value Ben Dooks
2008-02-05 0:02 ` [PATCH 14/24 for-2.6.25] DM9000: Remove EEPROM initialisation code Ben Dooks
2008-02-05 0:02 ` [PATCH 15/24 for-2.6.25] DM9000: Ensure spinlock held whilst accessing EEPROM registers Ben Dooks
2008-02-05 0:02 ` [PATCH 16/24 for-2.6.25] DM9000: Remove unnecessary changelog in header comment Ben Dooks
2008-02-05 0:02 ` [PATCH 17/24 for-2.6.25] DM9000: Use netif_msg to enable debugging options Ben Dooks
2008-02-05 0:02 ` [PATCH 18/24 for-2.6.25] DM9000: Fix delays used by EEPROM read and write Ben Dooks
2008-02-05 0:02 ` [PATCH 19/24 for-2.6.25] DM9000: Remove cal_CRC() and use ether_crc_le instead Ben Dooks
2008-02-05 0:02 ` [PATCH 20/24 for-2.6.25] DM9000: Remove redudant use of "& 0xff" Ben Dooks
2008-02-05 0:02 ` [PATCH 21/24 for-2.6.25] DM9000: Add platform flag for no attached EEPROM Ben Dooks
2008-02-05 0:02 ` [PATCH 22/24 for-2.6.25] DM9000: Add support for MII ioctl() calls Ben Dooks
2008-02-05 0:02 ` [PATCH 23/24 for-2.6.25] DM9000: Update retry count whilst identifying chip Ben Dooks
2008-02-05 0:02 ` [PATCH 24/24 for-2.6.25] DM9000: Show the MAC address source after printing MAC Ben Dooks
2008-02-05 0:19 ` [PATCH 00/24 for-2.6.25] DM9000 updates for 2.6.25 Andrew Morton
2008-02-05 1:44 ` Ben Dooks
2008-02-05 9:52 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080205000815.759244139@fluff.org.uk \
--to=ben-linux@fluff.org \
--cc=akpm@linux-foundation.org \
--cc=daniel@caiaq.de \
--cc=jeff@garzik.org \
--cc=laurentp@cse-semaphore.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).