From: Ben Dooks <ben-linux@fluff.org>
To: netdev@vger.kernel.org
Cc: jeff@garzik.org, akpm@linux-foundation.org, daniel@caiaq.de,
laurentp@cse-semaphore.com, Ben Dooks <ben-linux@fluff.org>
Subject: [PATCH 19/24 for-2.6.25] DM9000: Remove cal_CRC() and use ether_crc_le instead
Date: Tue, 05 Feb 2008 00:02:18 +0000 [thread overview]
Message-ID: <20080205000818.333663910@fluff.org.uk> (raw)
In-Reply-To: 20080205000159.432081941@fluff.org.uk
[-- Attachment #1: simtec/simtec-drivers-net-dm9000-cleanup-removecrc.patch --]
[-- Type: text/plain, Size: 2328 bytes --]
Remove the cal_CRC as this is basically wrappering the
ether_crc_le function, and is only being used by the
multicast hash table functions.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Index: linux-2.6.24-quilt3/drivers/net/dm9000.c
===================================================================
--- linux-2.6.24-quilt3.orig/drivers/net/dm9000.c
+++ linux-2.6.24-quilt3/drivers/net/dm9000.c
@@ -1158,24 +1158,6 @@ dm9000_write_eeprom(board_info_t *db, in
}
/*
- * Calculate the CRC valude of the Rx packet
- * flag = 1 : return the reverse CRC (for the received packet CRC)
- * 0 : return the normal CRC (for Hash Table index)
- */
-
-static unsigned long
-cal_CRC(unsigned char *Data, unsigned int Len, u8 flag)
-{
-
- u32 crc = ether_crc_le(Len, Data);
-
- if (flag)
- return ~crc;
-
- return crc;
-}
-
-/*
* Set DM9000 multicast address
*/
static void
@@ -1184,15 +1166,16 @@ dm9000_hash_table(struct net_device *dev
board_info_t *db = (board_info_t *) dev->priv;
struct dev_mc_list *mcptr = dev->mc_list;
int mc_cnt = dev->mc_count;
+ int i, oft;
u32 hash_val;
- u16 i, oft, hash_table[4];
+ u16 hash_table[4];
unsigned long flags;
dm9000_dbg(db, 1, "entering %s\n", __func__);
- spin_lock_irqsave(&db->lock,flags);
+ spin_lock_irqsave(&db->lock, flags);
- for (i = 0, oft = 0x10; i < 6; i++, oft++)
+ for (i = 0, oft = DM9000_PAR; i < 6; i++, oft++)
iow(db, oft, dev->dev_addr[i]);
/* Clear Hash Table */
@@ -1204,17 +1187,17 @@ dm9000_hash_table(struct net_device *dev
/* the multicast address in Hash Table : 64 bits */
for (i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
- hash_val = cal_CRC((char *) mcptr->dmi_addr, 6, 0) & 0x3f;
+ hash_val = ether_crc_le(6, mcptr->dmi_addr) & 0x3f;
hash_table[hash_val / 16] |= (u16) 1 << (hash_val % 16);
}
/* Write the hash table to MAC MD table */
- for (i = 0, oft = 0x16; i < 4; i++) {
- iow(db, oft++, hash_table[i] & 0xff);
- iow(db, oft++, (hash_table[i] >> 8) & 0xff);
+ for (i = 0, oft = DM9000_MAR; i < 4; i++) {
+ iow(db, oft++, hash_table[i]);
+ iow(db, oft++, hash_table[i] >> 8);
}
- spin_unlock_irqrestore(&db->lock,flags);
+ spin_unlock_irqrestore(&db->lock, flags);
}
--
Ben (ben@fluff.org, http://www.fluff.org/)
'a smiley only costs 4 bytes'
next prev parent reply other threads:[~2008-02-05 0:08 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-05 0:01 [PATCH 00/24 for-2.6.25] DM9000 updates for 2.6.25 Ben Dooks
2008-02-05 0:02 ` [PATCH 01/24 for-2.6.25] DM9000: Fix endian-ness of data accesses. Patch from: Laurent Pinchart <laurentp@cse-semaphore.com> Ben Dooks
2008-02-05 0:13 ` [PATCH 01/24 for-2.6.25] DM9000: Fix endian-ness of data accesses Ben Dooks
2008-02-05 22:57 ` [PATCH 01/24 for-2.6.25] DM9000: Fix endian-ness of data accesses. Patch from: Laurent Pinchart <laurentp@cse-semaphore.com> Francois Romieu
2008-02-06 11:46 ` Jeff Garzik
2008-02-07 13:28 ` Laurent Pinchart
2008-02-07 14:54 ` Jeff Garzik
2008-02-07 13:30 ` Christoph Hellwig
2008-02-05 0:02 ` [PATCH 02/24 for-2.6.25] DM9000: Add platform data to specify external phy " Ben Dooks
2008-02-05 0:14 ` [PATCH 02/24 for-2.6.25] DM9000: Add platform data to specify external phy Ben Dooks
2008-02-05 0:02 ` [PATCH 03/24 for-2.6.25] DM9000 use dev_xxx() instead of printk for output Ben Dooks
2008-02-05 0:02 ` [PATCH 04/24 for-2.6.25] DM9000 update debugging macros to use debug level Ben Dooks
2008-02-05 0:02 ` [PATCH 05/24 for-2.6.25] DM9000: Pass IRQ flags via platform resources Ben Dooks
2008-02-05 0:02 ` [PATCH 06/24 for-2.6.25] DM9000: Remove old timer based poll routines Ben Dooks
2008-02-05 0:02 ` [PATCH 07/24 for-2.6.25] DM9000: Add initial ethtool support Ben Dooks
2008-02-05 22:50 ` Francois Romieu
2008-02-06 22:03 ` Ben Dooks
2008-02-06 21:52 ` Francois Romieu
2008-02-06 22:16 ` Ben Dooks
2008-02-05 0:02 ` [PATCH 08/24 for-2.6.25] DM9000: Do not sleep with spinlock and IRQs held Ben Dooks
2008-02-05 0:02 ` [PATCH 09/24 for-2.6.25] DM9000: Use msleep() instead of udelay() Ben Dooks
2008-02-05 0:02 ` [PATCH 10/24 for-2.6.25] DM9000: Remove barely used SROM array read Ben Dooks
2008-02-05 0:02 ` [PATCH 11/24 for-2.6.25] DM9000: Add mutex to protect access Ben Dooks
2008-02-05 0:02 ` [PATCH 12/24 for-2.6.25] DM9000: Add ethtool support for reading and writing EEPROM Ben Dooks
2008-02-05 0:02 ` [PATCH 13/24 for-2.6.25] DM9000: Add ethtool control of msg_enable value Ben Dooks
2008-02-05 0:02 ` [PATCH 14/24 for-2.6.25] DM9000: Remove EEPROM initialisation code Ben Dooks
2008-02-05 0:02 ` [PATCH 15/24 for-2.6.25] DM9000: Ensure spinlock held whilst accessing EEPROM registers Ben Dooks
2008-02-05 0:02 ` [PATCH 16/24 for-2.6.25] DM9000: Remove unnecessary changelog in header comment Ben Dooks
2008-02-05 0:02 ` [PATCH 17/24 for-2.6.25] DM9000: Use netif_msg to enable debugging options Ben Dooks
2008-02-05 0:02 ` [PATCH 18/24 for-2.6.25] DM9000: Fix delays used by EEPROM read and write Ben Dooks
2008-02-05 0:02 ` Ben Dooks [this message]
2008-02-05 0:02 ` [PATCH 20/24 for-2.6.25] DM9000: Remove redudant use of "& 0xff" Ben Dooks
2008-02-05 0:02 ` [PATCH 21/24 for-2.6.25] DM9000: Add platform flag for no attached EEPROM Ben Dooks
2008-02-05 0:02 ` [PATCH 22/24 for-2.6.25] DM9000: Add support for MII ioctl() calls Ben Dooks
2008-02-05 0:02 ` [PATCH 23/24 for-2.6.25] DM9000: Update retry count whilst identifying chip Ben Dooks
2008-02-05 0:02 ` [PATCH 24/24 for-2.6.25] DM9000: Show the MAC address source after printing MAC Ben Dooks
2008-02-05 0:19 ` [PATCH 00/24 for-2.6.25] DM9000 updates for 2.6.25 Andrew Morton
2008-02-05 1:44 ` Ben Dooks
2008-02-05 9:52 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080205000818.333663910@fluff.org.uk \
--to=ben-linux@fluff.org \
--cc=akpm@linux-foundation.org \
--cc=daniel@caiaq.de \
--cc=jeff@garzik.org \
--cc=laurentp@cse-semaphore.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).