From: Auke Kok <auke-jan.h.kok@intel.com>
To: jeff@garzik.org
Cc: e1000-devel@lists.sourceforge.net, netdev@vger.kernel.org
Subject: [PATCH 1/2] igb: PCIe devices do not need to unset MANC_ARP_ENA
Date: Thu, 14 Feb 2008 10:17:12 -0800 [thread overview]
Message-ID: <20080214181712.11070.48342.stgit@localhost.localdomain> (raw)
From: David Graham <david.graham@intel.com>
Users reported that ARP's were lost with igb. The problem
is fixed by not enabling this manageability configuration
bit.
None of the release_manageability code is actually needed as the
normal device reset during a shutdown returns everthing to
the right condition automatically.
Signed-off-by: David Graham <david.graham@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
---
drivers/net/igb/igb_main.c | 28 ----------------------------
1 files changed, 0 insertions(+), 28 deletions(-)
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index d4eb8e2..bff280e 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -606,9 +606,6 @@ static void igb_init_manageability(struct igb_adapter *adapter)
u32 manc2h = rd32(E1000_MANC2H);
u32 manc = rd32(E1000_MANC);
- /* disable hardware interception of ARP */
- manc &= ~(E1000_MANC_ARP_EN);
-
/* enable receiving management packets to the host */
/* this will probably generate destination unreachable messages
* from the host OS, but the packets will be handled on SMBUS */
@@ -623,25 +620,6 @@ static void igb_init_manageability(struct igb_adapter *adapter)
}
}
-static void igb_release_manageability(struct igb_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
-
- if (adapter->en_mng_pt) {
- u32 manc = rd32(E1000_MANC);
-
- /* re-enable hardware interception of ARP */
- manc |= E1000_MANC_ARP_EN;
- manc &= ~E1000_MANC_EN_MNG2HOST;
-
- /* don't explicitly have to mess with MANC2H since
- * MANC has an enable disable that gates MANC2H */
-
- /* XXX stop the hardware watchdog ? */
- wr32(E1000_MANC, manc);
- }
-}
-
/**
* igb_configure - configure the hardware for RX and TX
* @adapter: private board structure
@@ -844,7 +822,6 @@ void igb_reset(struct igb_adapter *adapter)
igb_reset_adaptive(&adapter->hw);
adapter->hw.phy.ops.get_phy_info(&adapter->hw);
- igb_release_manageability(adapter);
}
/**
@@ -1178,9 +1155,6 @@ static void __devexit igb_remove(struct pci_dev *pdev)
flush_scheduled_work();
-
- igb_release_manageability(adapter);
-
/* Release control of h/w to f/w. If f/w is AMT enabled, this
* would have already happened in close and is redundant. */
igb_release_hw_control(adapter);
@@ -3955,8 +3929,6 @@ static int igb_suspend(struct pci_dev *pdev, pm_message_t state)
pci_enable_wake(pdev, PCI_D3cold, 0);
}
- igb_release_manageability(adapter);
-
/* make sure adapter isn't asleep if manageability is enabled */
if (adapter->en_mng_pt) {
pci_enable_wake(pdev, PCI_D3hot, 1);
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
next reply other threads:[~2008-02-14 18:17 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-14 18:17 Auke Kok [this message]
2008-02-14 18:17 ` [PATCH 2/2] e1000e: PCIe devices do not need to unset MANC_ARP_ENA Auke Kok
2008-02-15 15:53 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080214181712.11070.48342.stgit@localhost.localdomain \
--to=auke-jan.h.kok@intel.com \
--cc=e1000-devel@lists.sourceforge.net \
--cc=jeff@garzik.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).