From: Jarek Poplawski <jarkao2@gmail.com>
To: James Chapman <jchapman@katalix.com>
Cc: David Miller <davem@davemloft.net>,
Paul Mackerras <paulus@samba.org>,
netdev@vger.kernel.org
Subject: Re: [PATCH][PPPOL2TP]: Fix SMP oops in pppol2tp driver
Date: Wed, 20 Feb 2008 19:38:38 +0100 [thread overview]
Message-ID: <20080220183837.GA2881@ami.dom.local> (raw)
In-Reply-To: <47BC4F2C.4000802@katalix.com>
On Wed, Feb 20, 2008 at 04:02:52PM +0000, James Chapman wrote:
...
> I tried your ppp_generic patch with only the hlist_lock bh patch in
> pppol2tp and it seems to fix the ppp create/delete issue. However, when
> I added much more traffic into the test (flood pings over ppp interfaces
> while repeatedly creating/deleting the L2TP (PPP) sessions) I get a soft
> lockup detected in pppol2tp_xmit() after anything between 1 minute and
> an hour. :( I'm investigating that now.
>
> Thanks for your help!
Not at all!
>
>> (testing patch #1)
But I hope you tested with the fixed (take 2) version of this patch...
Since it's quite experimental (testing) this patch could be wrong
as it is, but I hope it should show the proper way to solve this
problem. Probably you did some of these, but here are a few of my
suggestions for testing this:
1) try my patch with your full bh locking changing patch;
2) add while loops to these trylocks on failure, with e.g. __delay(1);
this should work like full locks again, but there should be no (this
kind of) lockdep reports;
3) I send here another testing patch with this second way to do this:
on the write side, but it's even more "experimental" and only a
proof of concept (should be applied on vanilla ppp_generic).
Regards,
Jarek P.
(testing patch #2)
---
drivers/net/ppp_generic.c | 20 +++++++++++++-------
1 files changed, 13 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 4dc5b4b..70bd255 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -2606,11 +2606,16 @@ ppp_connect_channel(struct channel *pch, int unit)
ppp = ppp_find_unit(unit);
if (!ppp)
goto out;
- write_lock_bh(&pch->upl);
+
ret = -EINVAL;
- if (pch->ppp)
- goto outl;
+ read_lock_bh(&pch->upl);
+ if (pch->ppp) {
+ read_unlock_bh(&pch->upl);
+ goto out;
+ }
+ read_unlock_bh(&pch->upl);
+ atomic_inc(&ppp->file.refcnt);
ppp_lock(ppp);
if (pch->file.hdrlen > ppp->file.hdrlen)
ppp->file.hdrlen = pch->file.hdrlen;
@@ -2619,13 +2624,14 @@ ppp_connect_channel(struct channel *pch, int unit)
ppp->dev->hard_header_len = hdrlen;
list_add_tail(&pch->clist, &ppp->channels);
++ppp->n_channels;
- pch->ppp = ppp;
- atomic_inc(&ppp->file.refcnt);
ppp_unlock(ppp);
- ret = 0;
- outl:
+ /* avoid lock dependency with ppp_locks */
+ write_lock_bh(&pch->upl);
+ BUG_ON(pch->ppp);
+ pch->ppp = ppp;
write_unlock_bh(&pch->upl);
+ ret = 0;
out:
mutex_unlock(&all_ppp_mutex);
return ret;
next prev parent reply other threads:[~2008-02-20 18:35 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-11 9:22 [PATCH][PPPOL2TP]: Fix SMP oops in pppol2tp driver James Chapman
2008-02-11 18:57 ` Jarek Poplawski
2008-02-11 22:19 ` James Chapman
2008-02-11 22:49 ` Jarek Poplawski
2008-02-11 22:55 ` Jarek Poplawski
2008-02-11 23:42 ` James Chapman
2008-02-12 10:42 ` Jarek Poplawski
2008-02-11 23:41 ` James Chapman
2008-02-12 5:30 ` David Miller
2008-02-12 10:58 ` James Chapman
2008-02-12 13:24 ` Jarek Poplawski
2008-02-13 6:00 ` David Miller
2008-02-13 7:29 ` Jarek Poplawski
2008-02-14 13:00 ` Jarek Poplawski
2008-02-18 22:09 ` James Chapman
2008-02-18 23:01 ` Jarek Poplawski
2008-02-19 9:09 ` James Chapman
2008-02-19 4:29 ` David Miller
2008-02-19 9:03 ` James Chapman
2008-02-19 10:30 ` Jarek Poplawski
2008-02-19 10:36 ` Jarek Poplawski
2008-02-19 14:37 ` James Chapman
2008-02-19 23:06 ` Jarek Poplawski
2008-02-19 23:28 ` Jarek Poplawski
2008-02-20 16:02 ` James Chapman
2008-02-20 18:38 ` Jarek Poplawski [this message]
2008-02-20 22:37 ` James Chapman
2008-02-21 8:59 ` Jarek Poplawski
2008-02-21 9:53 ` James Chapman
2008-02-21 12:08 ` Jarek Poplawski
2008-02-21 17:09 ` Jarek Poplawski
2008-02-25 12:19 ` James Chapman
2008-02-25 13:05 ` Jarek Poplawski
2008-02-25 13:39 ` Jarek Poplawski
2008-02-25 14:02 ` Jarek Poplawski
2008-02-25 21:58 ` Jarek Poplawski
2008-02-26 12:14 ` James Chapman
2008-02-26 13:03 ` Jarek Poplawski
2008-02-26 13:18 ` Jarek Poplawski
2008-02-26 20:00 ` Jarek Poplawski
2008-03-02 20:29 ` James Chapman
2008-03-03 8:22 ` Jarek Poplawski
2008-03-03 9:35 ` Jarek Poplawski
2008-02-27 10:54 ` [PATCH][PPPOL2TP] add missing sock_put() in pppol2tp_recv_dequeue() Jarek Poplawski
2008-03-02 20:31 ` James Chapman
2008-03-04 4:49 ` David Miller
2008-02-27 11:48 ` [PATCH][PPPOL2TP] add missing sock_put() in pppol2tp_tunnel_closeall() Jarek Poplawski
2008-03-02 20:32 ` James Chapman
2008-03-04 4:49 ` David Miller
2008-02-22 14:16 ` [PATCH][NET] sock.c: sk_dst_lock lockdep keys and names per af_family Jarek Poplawski
2008-02-12 7:19 ` [PATCH][PPPOL2TP]: Fix SMP oops in pppol2tp driver Jarek Poplawski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080220183837.GA2881@ami.dom.local \
--to=jarkao2@gmail.com \
--cc=davem@davemloft.net \
--cc=jchapman@katalix.com \
--cc=netdev@vger.kernel.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).