From: Auke Kok <auke-jan.h.kok@intel.com>
To: netdev@vger.kernel.org
Cc: e1000-devel@lists.sourceforge.net, torvalds@linux-foundation.org,
jeff@garzik.org
Subject: [PATCH] [2.6.26 / RFC] e1000: remove PCI Express device IDs
Date: Fri, 28 Mar 2008 10:41:46 -0700 [thread overview]
Message-ID: <20080328174146.11857.94690.stgit@localhost.localdomain> (raw)
We do not want to prolong the situation much longer that e1000
and e1000e support these devices at the same time. As a result,
take out the bandage that was added for the interim period
and remove all the PCI Express device IDs from e1000.
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jeff Garzik <jeff@garzik.org>
---
drivers/net/Kconfig | 3 ---
drivers/net/e1000/e1000_main.c | 33 ---------------------------------
2 files changed, 0 insertions(+), 36 deletions(-)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 95d1b61..ec764a9 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2028,9 +2028,6 @@ config E1000E
To compile this driver as a module, choose M here. The module
will be called e1000e.
-config E1000E_ENABLED
- def_bool E1000E != n
-
config IP1000
tristate "IP1000 Gigabit Ethernet support"
depends on PCI && EXPERIMENTAL
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 757d02f..f12de3c 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -47,12 +47,6 @@ static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation
* Macro expands to...
* {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
*/
-#ifdef CONFIG_E1000E_ENABLED
- #define PCIE(x)
-#else
- #define PCIE(x) x,
-#endif
-
static struct pci_device_id e1000_pci_tbl[] = {
INTEL_E1000_ETHERNET_DEVICE(0x1000),
INTEL_E1000_ETHERNET_DEVICE(0x1001),
@@ -79,14 +73,6 @@ static struct pci_device_id e1000_pci_tbl[] = {
INTEL_E1000_ETHERNET_DEVICE(0x1026),
INTEL_E1000_ETHERNET_DEVICE(0x1027),
INTEL_E1000_ETHERNET_DEVICE(0x1028),
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x1049))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x104A))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x104B))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x104C))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x104D))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x105E))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x105F))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x1060))
INTEL_E1000_ETHERNET_DEVICE(0x1075),
INTEL_E1000_ETHERNET_DEVICE(0x1076),
INTEL_E1000_ETHERNET_DEVICE(0x1077),
@@ -95,28 +81,9 @@ PCIE( INTEL_E1000_ETHERNET_DEVICE(0x1060))
INTEL_E1000_ETHERNET_DEVICE(0x107A),
INTEL_E1000_ETHERNET_DEVICE(0x107B),
INTEL_E1000_ETHERNET_DEVICE(0x107C),
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x107D))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x107E))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x107F))
INTEL_E1000_ETHERNET_DEVICE(0x108A),
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x108B))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x108C))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x1096))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x1098))
INTEL_E1000_ETHERNET_DEVICE(0x1099),
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x109A))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10A4))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10A5))
INTEL_E1000_ETHERNET_DEVICE(0x10B5),
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10B9))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10BA))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10BB))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10BC))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10C4))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10C5))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10D5))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10D9))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10DA))
/* required last entry */
{0,}
};
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
next reply other threads:[~2008-03-28 17:41 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-28 17:41 Auke Kok [this message]
2008-03-29 2:17 ` [PATCH] [2.6.26 / RFC] e1000: remove PCI Express device IDs Jeff Garzik
2008-03-31 18:32 ` [E1000-devel] " Kok, Auke
2008-04-04 8:08 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080328174146.11857.94690.stgit@localhost.localdomain \
--to=auke-jan.h.kok@intel.com \
--cc=e1000-devel@lists.sourceforge.net \
--cc=jeff@garzik.org \
--cc=netdev@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).