netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: Kumar Gala <galak@kernel.crashing.org>,
	netdev@vger.kernel.org, linuxppc-dev@ozlabs.org
Subject: [PATCH 1/3] [NET] uli526x: initialize the hardware prior to requesting interrupts
Date: Tue, 29 Apr 2008 19:53:13 +0400	[thread overview]
Message-ID: <20080429155313.GA28166@polina.dev.rtsoft.ru> (raw)

The firmware on MPC8610HPCD boards enables ULI ethernet and leaves it
in some funky state before booting Linux. For drivers, it's always good
idea to (re)initialize the hardware prior to requesting interrupts.

This patch fixes the following oops:

Oops: Kernel access of bad area, sig: 11 [#1]
MPC86xx HPCD
NIP: c0172820 LR: c017287c CTR: 00000000
[...]
NIP [c0172820] allocate_rx_buffer+0x2c/0xb0
LR [c017287c] allocate_rx_buffer+0x88/0xb0
Call Trace:
[df82bdc0] [c017287c] allocate_rx_buffer+0x88/0xb0 (unreliable)
[df82bde0] [c0173000] uli526x_interrupt+0xe4/0x49c
[df82be20] [c0045418] request_irq+0xf0/0x114
[df82be50] [c01737b0] uli526x_open+0x48/0x160
[df82be70] [c0201184] dev_open+0xb0/0xe8
[df82be80] [c0200104] dev_change_flags+0x90/0x1bc
[df82bea0] [c035fab0] ip_auto_config+0x214/0xef4
[df82bf60] [c03421c8] kernel_init+0xc4/0x2ac
[df82bff0] [c0010834] kernel_thread+0x44/0x60
Instruction dump:
4e800020 9421ffe0 7c0802a6 bfa10014 7c7e1b78 90010024 80030060 83e30054
2b80002f 419d0078 3fa0c039 48000058 <907f0010> 80630088 2f830000 419e0014

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 drivers/net/tulip/uli526x.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index a59c1f2..1f077ac 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -434,10 +434,6 @@ static int uli526x_open(struct net_device *dev)
 
 	ULI526X_DBUG(0, "uli526x_open", 0);
 
-	ret = request_irq(dev->irq, &uli526x_interrupt, IRQF_SHARED, dev->name, dev);
-	if (ret)
-		return ret;
-
 	/* system variable init */
 	db->cr6_data = CR6_DEFAULT | uli526x_cr6_user_set;
 	db->tx_packet_cnt = 0;
@@ -456,6 +452,10 @@ static int uli526x_open(struct net_device *dev)
 	/* Initialize ULI526X board */
 	uli526x_init(dev);
 
+	ret = request_irq(dev->irq, &uli526x_interrupt, IRQF_SHARED, dev->name, dev);
+	if (ret)
+		return ret;
+
 	/* Active System Interface */
 	netif_wake_queue(dev);
 
-- 
1.5.5.1


             reply	other threads:[~2008-04-29 15:53 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-04-29 15:53 Anton Vorontsov [this message]
2008-05-06 16:18 ` [PATCH 1/3] [NET] uli526x: initialize the hardware prior to requesting interrupts Jeff Garzik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080429155313.GA28166@polina.dev.rtsoft.ru \
    --to=avorontsov@ru.mvista.com \
    --cc=galak@kernel.crashing.org \
    --cc=jgarzik@pobox.com \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).