[ofa-general] [PATCH 12/13] QLogic VNIC: Driver Kconfig and Makefile.

[Ramachandra K <ramachandra.kuchimanchi@qlogic.com>]

From: Ramachandra K <ramachandra.kuchimanchi@qlogic.com>

Kconfig and Makefile for the QLogic VNIC driver.

Signed-off-by: Poornima Kamath <poornima.kamath@qlogic.com>
Signed-off-by: Amar Mudrankit <amar.mudrankit@qlogic.com>
---

 drivers/infiniband/ulp/qlgc_vnic/Kconfig  |   28 ++++++++++++++++++++++++++++
 drivers/infiniband/ulp/qlgc_vnic/Makefile |   13 +++++++++++++
 2 files changed, 41 insertions(+), 0 deletions(-)
 create mode 100644 drivers/infiniband/ulp/qlgc_vnic/Kconfig
 create mode 100644 drivers/infiniband/ulp/qlgc_vnic/Makefile

diff --git a/drivers/infiniband/ulp/qlgc_vnic/Kconfig b/drivers/infiniband/ulp/qlgc_vnic/Kconfig
new file mode 100644
index 0000000..6a08770
--- /dev/null
+++ b/drivers/infiniband/ulp/qlgc_vnic/Kconfig
@@ -0,0 +1,28 @@
+config INFINIBAND_QLGC_VNIC
+	tristate "QLogic VNIC - Support for QLogic Ethernet Virtual I/O Controller"
+	depends on INFINIBAND && NETDEVICES && INET
+	---help---
+	  Support for the QLogic Ethernet Virtual I/O Controller
+	  (EVIC). In conjunction with the EVIC, this provides virtual
+	  ethernet interfaces and transports ethernet packets over
+	  InfiniBand so that you can communicate with Ethernet networks
+	  using your IB device.
+
+config INFINIBAND_QLGC_VNIC_DEBUG
+	bool "QLogic VNIC Verbose debugging"
+	depends on INFINIBAND_QLGC_VNIC
+	default n
+	---help---
+	  This option causes verbose debugging code to be compiled
+	  into the QLogic VNIC driver.  The output can be turned on via the
+	  vnic_debug module parameter.
+
+config INFINIBAND_QLGC_VNIC_STATS
+	bool "QLogic VNIC Statistics"
+	depends on INFINIBAND_QLGC_VNIC
+	default n
+	---help---
+	  This option compiles statistics collecting code into the
+	  data path of the QLogic VNIC driver to help in profiling and fine
+	  tuning. This adds some overhead in the interest of gathering
+	  data.
diff --git a/drivers/infiniband/ulp/qlgc_vnic/Makefile b/drivers/infiniband/ulp/qlgc_vnic/Makefile
new file mode 100644
index 0000000..509dd67
--- /dev/null
+++ b/drivers/infiniband/ulp/qlgc_vnic/Makefile
@@ -0,0 +1,13 @@
+obj-$(CONFIG_INFINIBAND_QLGC_VNIC)		+= qlgc_vnic.o
+
+qlgc_vnic-y					:= vnic_main.o \
+						   vnic_ib.o \
+						   vnic_viport.o \
+						   vnic_control.o \
+						   vnic_data.o \
+						   vnic_netpath.o \
+						   vnic_config.o \
+						   vnic_sys.o \
+						   vnic_multicast.o
+
+qlgc_vnic-$(CONFIG_INFINIBAND_QLGC_VNIC_STATS)	+= vnic_stats.o