From: Randy Dunlap <randy.dunlap@oracle.com>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Alan Cox <alan@redhat.com>,
jeff@garzik.org, netdev@vger.kernel.org
Subject: Re: [patch 04/13] 8390: Split 8390 support into a pausing and a non pausing driver core
Date: Wed, 11 Jun 2008 11:25:01 -0700 [thread overview]
Message-ID: <20080611112501.152da143.randy.dunlap@oracle.com> (raw)
In-Reply-To: <20080610112013.219fedda@core>
On Tue, 10 Jun 2008 11:20:13 +0100 Alan Cox wrote:
> On Mon, 9 Jun 2008 17:19:45 -0700
> Andrew Morton <akpm@linux-foundation.org> wrote:
>
> > On Mon, 9 Jun 2008 20:13:29 -0400
> > Alan Cox <alan@redhat.com> wrote:
> >
> > > To be clearer on this
> > >
> > > > +obj-$(CONFIG_NE2_MCA) += ne2.o 8390.o 8390p.o
> > >
> > > That line is wrong. Perhaps Andrew could post the original split patches
> > > instead ?
> >
> > iirc this is your original, plus Randy's fix:
>
> This corrects Randy's fix. The ne2.c code you have is actually correct
> just the Makefile wrong. Not sure where the original NAK/diff went but they
> aren't in the lkml archive either so they obviously got eaten somewhere my
> end.
>
> 8390: fix problems in the original split patch
>
> From: Alan Cox <alan@redhat.com>
>
> The split patch didn't fully convert the ne2 driver so it failed to link. At
> some point this was fixed but the Makefile also got changed to incorrectly
> link with both 8390 and 8390p. Only 8390p is needed so remove 8390.o references
>
> Signed-off-by: Alan Cox <alan@redhat.com>
> ---
>
> drivers/net/Makefile | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
>
> diff --git a/drivers/net/Makefile b/drivers/net/Makefile
> index 41b239a..388cab8 100644
> --- a/drivers/net/Makefile
> +++ b/drivers/net/Makefile
> @@ -107,7 +107,7 @@ obj-$(CONFIG_68360_ENET) += 68360enet.o
> obj-$(CONFIG_WD80x3) += wd.o 8390.o
> obj-$(CONFIG_EL2) += 3c503.o 8390p.o
> obj-$(CONFIG_NE2000) += ne.o 8390p.o
> -obj-$(CONFIG_NE2_MCA) += ne2.o 8390.o 8390p.o
> +obj-$(CONFIG_NE2_MCA) += ne2.o 8390p.o
> obj-$(CONFIG_HPLAN) += hp.o 8390p.o
> obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o
> obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o
Replacing my patch with this one yields:
drivers/built-in.o: In function `ne_block_output':
/local/linsrc/linux-2.6.26-rc5-mm2/drivers/net/ne2.c:751: undefined reference to `NS8390_init'
drivers/built-in.o: In function `ne2_probe1':
/local/linsrc/linux-2.6.26-rc5-mm2/drivers/net/ne2.c:502: undefined reference to `NS8390_init'
make[1]: *** [.tmp_vmlinux1] Error 1
for ne2 driver built into kernel image.
next prev parent reply other threads:[~2008-06-11 18:25 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-09 23:33 [patch 04/13] 8390: Split 8390 support into a pausing and a non pausing driver core akpm
2008-06-09 23:52 ` Alan Cox
2008-06-10 0:15 ` Andrew Morton
2008-06-10 8:55 ` Alan Cox
2008-06-10 0:13 ` Alan Cox
2008-06-10 0:19 ` Andrew Morton
2008-06-10 10:20 ` Alan Cox
2008-06-11 18:25 ` Randy Dunlap [this message]
2008-06-12 21:10 ` Alan Cox
2008-06-12 21:37 ` Randy Dunlap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080611112501.152da143.randy.dunlap@oracle.com \
--to=randy.dunlap@oracle.com \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=alan@redhat.com \
--cc=jeff@garzik.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).