From: Ben Dooks <ben-linux@fluff.org>
To: netdev@vger.kernel.org
Cc: jeff@garzik.org, Ben Dooks <ben-linux@fluff.org>,
Laurent Pinchart <laurentp@cse-semaphore.com>
Subject: [patch v2 01/11] DM9000: Remove the 2 resources probe scheme.
Date: Sun, 22 Jun 2008 21:16:46 +0100 [thread overview]
Message-ID: <20080622201904.535586386@fluff.org.uk> (raw)
In-Reply-To: 20080622201645.041001353@fluff.org.uk
[-- Attachment #1: thirdparty/dm9000-remove-2resources.patch --]
[-- Type: text/plain, Size: 4431 bytes --]
From: Laurent Pinchart <laurentp@cse-semaphore.com>
The dm9000 driver accepts either 2 or 3 resources to describe the platform
devices. The 2 resources case abuses the ioresource mechanism by passing
ioremap()ed memory through the platform device resources. This patch removes
that case and converts boards that were using it to the 3 resources scheme.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
---
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index 6bc8924..fca7831 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -528,7 +528,6 @@ dm9000_probe(struct platform_device *pdev)
struct board_info *db; /* Point a board information structure */
struct net_device *ndev;
const unsigned char *mac_src;
- unsigned long base;
int ret = 0;
int iosize;
int i;
@@ -561,78 +560,61 @@ dm9000_probe(struct platform_device *pdev)
if (pdev->num_resources < 2) {
ret = -ENODEV;
goto out;
- } else if (pdev->num_resources == 2) {
- base = pdev->resource[0].start;
-
- if (!request_mem_region(base, 4, ndev->name)) {
- ret = -EBUSY;
- goto out;
- }
-
- ndev->base_addr = base;
- ndev->irq = pdev->resource[1].start;
- db->io_addr = (void __iomem *)base;
- db->io_data = (void __iomem *)(base + 4);
+ }
- /* ensure at least we have a default set of IO routines */
- dm9000_set_io(db, 2);
+ db->addr_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ db->data_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ db->irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- } else {
- db->addr_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- db->data_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- db->irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-
- if (db->addr_res == NULL || db->data_res == NULL ||
- db->irq_res == NULL) {
- dev_err(db->dev, "insufficient resources\n");
- ret = -ENOENT;
- goto out;
- }
+ if (db->addr_res == NULL || db->data_res == NULL ||
+ db->irq_res == NULL) {
+ dev_err(db->dev, "insufficient resources\n");
+ ret = -ENOENT;
+ goto out;
+ }
- i = res_size(db->addr_res);
- db->addr_req = request_mem_region(db->addr_res->start, i,
- pdev->name);
+ iosize = res_size(db->addr_res);
+ db->addr_req = request_mem_region(db->addr_res->start, iosize,
+ pdev->name);
- if (db->addr_req == NULL) {
- dev_err(db->dev, "cannot claim address reg area\n");
- ret = -EIO;
- goto out;
- }
-
- db->io_addr = ioremap(db->addr_res->start, i);
+ if (db->addr_req == NULL) {
+ dev_err(db->dev, "cannot claim address reg area\n");
+ ret = -EIO;
+ goto out;
+ }
- if (db->io_addr == NULL) {
- dev_err(db->dev, "failed to ioremap address reg\n");
- ret = -EINVAL;
- goto out;
- }
+ db->io_addr = ioremap(db->addr_res->start, iosize);
- iosize = res_size(db->data_res);
- db->data_req = request_mem_region(db->data_res->start, iosize,
- pdev->name);
+ if (db->io_addr == NULL) {
+ dev_err(db->dev, "failed to ioremap address reg\n");
+ ret = -EINVAL;
+ goto out;
+ }
- if (db->data_req == NULL) {
- dev_err(db->dev, "cannot claim data reg area\n");
- ret = -EIO;
- goto out;
- }
+ iosize = res_size(db->data_res);
+ db->data_req = request_mem_region(db->data_res->start, iosize,
+ pdev->name);
- db->io_data = ioremap(db->data_res->start, iosize);
+ if (db->data_req == NULL) {
+ dev_err(db->dev, "cannot claim data reg area\n");
+ ret = -EIO;
+ goto out;
+ }
- if (db->io_data == NULL) {
- dev_err(db->dev,"failed to ioremap data reg\n");
- ret = -EINVAL;
- goto out;
- }
+ db->io_data = ioremap(db->data_res->start, iosize);
- /* fill in parameters for net-dev structure */
+ if (db->io_data == NULL) {
+ dev_err(db->dev,"failed to ioremap data reg\n");
+ ret = -EINVAL;
+ goto out;
+ }
- ndev->base_addr = (unsigned long)db->io_addr;
- ndev->irq = db->irq_res->start;
+ /* fill in parameters for net-dev structure */
+ ndev->base_addr = (unsigned long)db->io_addr;
+ ndev->irq = db->irq_res->start;
- /* ensure at least we have a default set of IO routines */
- dm9000_set_io(db, iosize);
- }
+ /* ensure at least we have a default set of IO routines */
+ dm9000_set_io(db, iosize);
/* check to see if anything is being over-ridden */
if (pdata != NULL) {
--
Ben (ben@fluff.org, http://www.fluff.org/)
'a smiley only costs 4 bytes'
next prev parent reply other threads:[~2008-06-22 20:19 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-22 20:16 [patch v2 00/11] DM9000 patch series for next kernel Ben Dooks
2008-06-22 20:16 ` Ben Dooks [this message]
2008-06-22 20:34 ` [patch v2 01/11] DM9000: Remove the 2 resources probe scheme Ben Hutchings
2008-06-22 21:18 ` Ben Dooks
2008-06-23 7:40 ` Laurent Pinchart
2008-06-22 20:16 ` [patch v2 02/11] DM9000: Fixup blackfin after removing 2 resource usage Ben Dooks
2008-06-22 20:35 ` Ben Hutchings
2008-06-23 9:24 ` Ben Dooks
2008-06-23 9:56 ` Bryan Wu
2008-06-23 10:20 ` Ben Dooks
2008-06-24 2:00 ` Bryan Wu
2008-06-22 20:16 ` [patch v2 03/11] DM9000: Add support for DM9000A and DM9000B chips Ben Dooks
2008-06-22 20:16 ` [patch v2 04/11] DM9000: Cleanup source code Ben Dooks
2008-06-22 20:16 ` [patch v2 05/11] DM9000: Cleanup source code - remove forward declerations Ben Dooks
2008-06-22 20:16 ` [patch v2 06/11] DM9000: Use NSR to determine link-status on internal PHY Ben Dooks
2008-06-22 20:16 ` [patch v2 07/11] DM9000: Allow the use of the NSR register to get link status Ben Dooks
2008-06-22 20:16 ` [patch v2 08/11] DM9000: Add missing msleep() in EEPROM wait code Ben Dooks
2008-06-22 20:16 ` [patch v2 09/11] DM9000: Re-unit menuconfig entries for DM9000 driver Ben Dooks
2008-06-22 20:16 ` [patch v2 10/11] DM9000: Show Mbps on link change if using simple polling Ben Dooks
2008-06-22 20:16 ` [patch v2 11/11] DM9000: Remove DEFAULT_TRIGGER for request_irq() flags Ben Dooks
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080622201904.535586386@fluff.org.uk \
--to=ben-linux@fluff.org \
--cc=jeff@garzik.org \
--cc=laurentp@cse-semaphore.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).