From: Rusty Russell <rusty@rustcorp.com.au>
To: Anthony Liguori <anthony@codemonkey.ws>
Cc: Max Krasnyansky <maxk@qualcomm.com>,
markmc@redhat.com, netdev@vger.kernel.org,
Herbert Xu <herbert@gondor.apana.org.au>,
virtualization@lists.linux-foundation.org
Subject: Re: [PATCH 4/4] lguest: Use GSO/IFF_VNET_HDR extensions on tun/tap
Date: Thu, 26 Jun 2008 14:40:43 +1000 [thread overview]
Message-ID: <200806261440.43984.rusty@rustcorp.com.au> (raw)
In-Reply-To: <48629766.4040905@codemonkey.ws>
On Thursday 26 June 2008 05:07:18 Anthony Liguori wrote:
> Rusty Russell wrote:
> > @@ -1563,6 +1561,16 @@ static void setup_tun_net(char *arg)
> > /* Tell Guest what MAC address to use. */
> > add_feature(dev, VIRTIO_NET_F_MAC);
> > add_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY);
> > + /* Expect Guest to handle everything except UFO */
> > + add_feature(dev, VIRTIO_NET_F_CSUM);
>
> You're setting this feature twice.
Hmm, not in the version here?
> > + add_feature(dev, VIRTIO_NET_F_GUEST_CSUM);
>
> You set this feature, but I never see the virtio-net driver acknowledge
> the feature. Curiously, my implementation with KVM is struggling
> because UDP packet checksums are not correct so the DHCP client is
> ignoring them. If I disable CSUM offload, things it works fine (using
> the virtio-net header). The problem is only host=>guest, guest=>host is
> fine.
OK, found this: wrong args to skb_partial_csum_set. It was found by Mark
McLoughlin before, I just lost the fix when I extracted this into a separate
patch. I chose to move the call to skb_partial_csum_set(), rather than use
his fix (which assumed a tap not tun device).
Here's two fixes on top of previous patch:
diff -u b/drivers/net/tun.c b/drivers/net/tun.c
--- b/drivers/net/tun.c Thu Jun 26 00:21:59 2008 +1000
+++ b/drivers/net/tun.c Thu Jun 26 14:35:03 2008 +1000
@@ -298,11 +298,11 @@
if ((len -= sizeof(gso)) > count)
return -EINVAL;
- if (gso.hdr_len > len)
- return -EINVAL;
-
if (memcpy_fromiovec((void *)&gso, iv, sizeof(gso)))
return -EFAULT;
+
+ if (gso.hdr_len > len)
+ return -EINVAL;
}
if ((tun->flags & TUN_TYPE_MASK) == TUN_TAP_DEV) {
@@ -324,6 +324,16 @@
return -EFAULT;
}
+ if (gso.flags & VIRTIO_NET_HDR_F_NEEDS_CSUM) {
+ if (!skb_partial_csum_set(skb, gso.csum_start,
+ gso.csum_offset)) {
+ tun->dev->stats.rx_dropped++;
+ kfree_skb(skb);
+ return -EINVAL;
+ }
+ } else if (tun->flags & TUN_NOCHECKSUM)
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+
switch (tun->flags & TUN_TYPE_MASK) {
case TUN_TUN_DEV:
skb_reset_mac_header(skb);
@@ -335,16 +345,6 @@
break;
};
- if (gso.flags & VIRTIO_NET_HDR_F_NEEDS_CSUM) {
- if (!skb_partial_csum_set(skb, gso.csum_start,
- gso.csum_offset)) {
- tun->dev->stats.rx_dropped++;
- kfree_skb(skb);
- return -EINVAL;
- }
- } else if (tun->flags & TUN_NOCHECKSUM)
- skb->ip_summed = CHECKSUM_UNNECESSARY;
-
if (gso.gso_type != VIRTIO_NET_HDR_GSO_NONE) {
pr_debug("GSO!\n");
switch (gso.gso_type & ~VIRTIO_NET_HDR_GSO_ECN) {
next prev parent reply other threads:[~2008-06-26 4:40 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-25 14:28 [PATCH 1/4] tun: Interface to query tun/tap features Rusty Russell
2008-06-25 14:29 ` [PATCH 2/4] tun: TUNSETFEATURES to set gso features Rusty Russell
2008-06-25 14:30 ` [PATCH 3/4] tun: Allow GSO using virtio_net_hdr Rusty Russell
2008-06-25 14:32 ` [PATCH 4/4] lguest: Use GSO/IFF_VNET_HDR extensions on tun/tap Rusty Russell
2008-06-25 15:45 ` Rusty Russell
[not found] ` <200806260032.12359.rusty__46755.7742762894$1214404667$gmane$org@rustcorp.com.au>
2008-06-25 19:07 ` Anthony Liguori
2008-06-26 4:40 ` Rusty Russell [this message]
2008-06-26 18:16 ` Anthony Liguori
2008-06-27 3:50 ` Rusty Russell
2008-07-02 5:25 ` Max Krasnyansky
2008-07-02 5:13 ` [PATCH 3/4] tun: Allow GSO using virtio_net_hdr Max Krasnyansky
2008-07-02 7:00 ` Rusty Russell
2008-07-24 14:20 ` Herbert Xu
2008-07-24 23:54 ` Rusty Russell
2008-07-02 5:02 ` [PATCH 2/4] tun: TUNSETFEATURES to set gso features Max Krasnyansky
2008-07-02 4:59 ` [PATCH 1/4] tun: Interface to query tun/tap features Max Krasnyansky
2008-07-02 5:27 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200806261440.43984.rusty@rustcorp.com.au \
--to=rusty@rustcorp.com.au \
--cc=anthony@codemonkey.ws \
--cc=herbert@gondor.apana.org.au \
--cc=markmc@redhat.com \
--cc=maxk@qualcomm.com \
--cc=netdev@vger.kernel.org \
--cc=virtualization@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).