From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ingo Molnar Subject: Re: [bug, netconsole, SLUB] BUG skbuff_head_cache: Poison overwritten Date: Mon, 21 Jul 2008 13:13:22 +0200 Message-ID: <20080721111322.GA17251@elte.hu> References: <20080717214222.GA29449@elte.hu> <20080718091146.GQ6875@elte.hu> <20080721094110.GA16029@elte.hu> <84144f020807210252k68d5cf65i8c7ae3c11cecc046@mail.gmail.com> <20080721100627.GA5953@2ka.mipt.ru> <20080721105051.GA5830@elte.hu> <19f34abd0807210403n1bca348fn83773b55a08b7993@mail.gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Cc: Evgeniy Polyakov , Pekka Enberg , linux-kernel@vger.kernel.org, netdev@vger.kernel.org, "Rafael J. Wysocki" , cl@linux-foundation.org, davem@davemloft.net To: Vegard Nossum Return-path: Received: from mx3.mail.elte.hu ([157.181.1.138]:57667 "EHLO mx3.mail.elte.hu" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751835AbYGULOC (ORCPT ); Mon, 21 Jul 2008 07:14:02 -0400 Content-Disposition: inline In-Reply-To: <19f34abd0807210403n1bca348fn83773b55a08b7993@mail.gmail.com> Sender: netdev-owner@vger.kernel.org List-ID: * Vegard Nossum wrote: > On Mon, Jul 21, 2008 at 12:50 PM, Ingo Molnar wrote: > > the problem is, most of the crashes dont come with any usable dump.= This > > is a laptop so netconsole is the only reliable route out - and if > > something in networking crashes chances are that it hoses netconsol= e > > before it can get anything out. > > > > Another thing is that i'm activating netconsole on this box via a k= ernel > > boot line and from within a bzImage (to get it activated as early a= s > > possible) - maybe that's a tad too early for certain initialization > > sequences? > > > > I could try run tests with netconsole deactivated, if you think=20 > > that's a worthwile line of probing this problem. (although that=20 > > would make me do blind tests in essence - having kernel log output=20 > > is really essential.) >=20 > How about posting your custom patches for public review? :-D I changed nothing in that area - being able to enable the netconsole=20 like that has been a years-old feature. Otherwise it's just tip/master,= =20 but the weirdnesses were reproducible under plain linus/master as well. > (There was recently an odd case of kzalloc() succeeding even though i= t=20 > was called before the slab caches were initialized -- and it only=20 > generated a warning about irqs-on happening too early. I just mean to= =20 > say that it _can_ happen. On another machine, it crashed=20 > spectacularly. I guess you're not enabling the netconsole before slab= =20 > allocator is up?) if i had any changes in that area i'd have declared them. Find below th= e=20 full bootlog of the last crash - can you see any init order weirdness i= n=20 it? Btw., i disabled netconsole now and got 3 successful bootups in a row.=20 (which is still not significant statistically - i had a series of 40=20 bootups in a row before. Then again i had like 5 failures in a row=20 earlier this morning, before disabling netconsole.) Btw. #2, in the log below you can see this partial line: initcall pm_qos_power_init+0x0/0x54Linux version 2.6.26-tip (mingo@eur= ope) (gcc version 4.2.2) #3261 SMP Mon Jul 21 11:17:45 CEST 2008 That was a previous bootup with another failure but which came without=20 any log output. Hey, if you find this report frustrating, dont worry, i almost never=20 report easy bugs - i can fix them just fine ;-) Ingo ---------------> initcall pm_qos_power_init+0x0/0x54Linux version 2.6.26-tip (mingo@euro= pe) (gcc version 4.2.2) #3261 SMP Mon Jul 21 11:17:45 CEST 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007f6e0000 (usable) BIOS-e820: 000000007f6e0000 - 000000007f6f3000 (ACPI data) BIOS-e820: 000000007f6f3000 - 000000007f700000 (ACPI NVS) BIOS-e820: 000000007f700000 - 0000000080000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) debug: ignoring loglevel setting. using polling idle threads. using polling idle threads. last_pfn =3D 0x7f6e0 max_arch_pfn =3D 0x1000000 Warning only 896MB will be used. Use a HIGHMEM enabled kernel. kernel direct mapping tables up to 38000000 @ 7000-c000 NX (Execute Disable) protection: active DMI present. ACPI: RSDP 000F68A0, 0024 (r2 LENOVO) ACPI: XSDT 7F6E631F, 0074 (r1 LENOVO TP-79 1020 LTP 0) ACPI: FACP 7F6E6400, 00F4 (r3 LENOVO TP-79 1020 LNVO 1) ACPI Warning (tbfadt-0447): Optional field "Gpe1Block" has zero address= or length: 000000000000102C/0 [20080609] ACPI: DSDT 7F6E65E7, C765 (r1 LENOVO TP-79 1020 MSFT 100000E) ACPI: FACS 7F6F4000, 0040 ACPI: SSDT 7F6E65B4, 0033 (r1 LENOVO TP-79 1020 MSFT 100000E) ACPI: ECDT 7F6F2D4C, 0052 (r1 LENOVO TP-79 1020 LNVO 1) ACPI: TCPA 7F6F2D9E, 0032 (r2 LENOVO TP-79 1020 LNVO 1) ACPI: APIC 7F6F2DD0, 0068 (r1 LENOVO TP-79 1020 LNVO 1) ACPI: MCFG 7F6F2E38, 003E (r1 LENOVO TP-79 1020 LNVO 1) ACPI: HPET 7F6F2E76, 0038 (r1 LENOVO TP-79 1020 LNVO 1) ACPI: BOOT 7F6F2FD8, 0028 (r1 LENOVO TP-79 1020 LTP 1) ACPI: SSDT 7F6E58DA, 0507 (r1 LENOVO TP-79 1020 INTL 20050513) ACPI: SSDT 7F6E5702, 01D8 (r1 LENOVO TP-79 1020 INTL 20050513) Entering add_active_range(0, 0x0, 0x9f) 0 entries of 256 used Entering add_active_range(0, 0x100, 0x38000) 1 entries of 256 used 896MB LOWMEM available. mapped low ram: 0 - 38000000 low ram: 00000000 - 38000000 bootmap 00009000 - 00010000 (8 early reservations) =3D=3D> bootmem [0000000000 - 0038000000] #0 [0000000000 - 0000001000] BIOS data page =3D=3D> [0000000000 - 0= 000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE =3D=3D> [0000001000 - 0= 000002000] #2 [0000006000 - 0000007000] TRAMPOLINE =3D=3D> [0000006000 - 0= 000007000] #3 [0000100000 - 0000ccbc50] TEXT DATA BSS =3D=3D> [0000100000 - 0= 000ccbc50] #4 [0000ccc000 - 0000d18000] INIT_PG_TABLE =3D=3D> [0000ccc000 - 0= 000d18000] #5 [000009f000 - 0000100000] BIOS reserved =3D=3D> [000009f000 - 0= 000100000] #6 [0000007000 - 0000009000] PGTABLE =3D=3D> [0000007000 - 0= 000009000] #7 [0000009000 - 0000010000] BOOTMAP =3D=3D> [0000009000 - 0= 000010000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x00038000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x00038000 On node 0 totalpages: 229279 free_area_init_node: node 0, pgdat c081bf80, node_mem_map c1000000 DMA zone: 56 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3943 pages, LIFO batch:0 Normal zone: 3080 pages used for memmap Normal zone: 222200 pages, LIFO batch:31 Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Bus #0 is ISA ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) PERCPU: Allocating 332592 bytes of per cpu data NR_CPUS: 8, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 22= 6143 Kernel command line: root=3D/dev/sda1 console=3Dtty profile=3D0 debug i= nitcall_debug enforcing=3D0 apic=3Dverbose sysrq_always_enabled ignore_= loglevel selinux=3D1 relaxed_check=3D1 netconsole=3D4444@10.0.1.15/eth0= ,4444@10.0.1.16/00:19:d1:01:f5:55 nmi_watchdog=3D2 idle=3Dpoll no_hz=3D= off nmi_watchdog=3D0 nolapic_timer hpet=3Ddisable idle=3Dmwait idle=3Dp= oll nopat kernel profiling enabled (shift: 0) debug: sysrq always enabled. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=3Dc0941000 soft=3Dc0939000 PID hash table entries: 4096 (order: 12, 16384 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER Detected 1828.742 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molna= r =2E.. MAX_LOCKDEP_SUBCLASSES: 8 =2E.. MAX_LOCK_DEPTH: 48 =2E.. MAX_LOCKDEP_KEYS: 2048 =2E.. CLASSHASH_SIZE: 1024 =2E.. MAX_LOCKDEP_ENTRIES: 8192 =2E.. MAX_LOCKDEP_CHAINS: 16384 =2E.. CHAINHASH_SIZE: 8192 memory used by lock dependency info: 1088 kB per task-struct memory footprint: 2688 bytes ------------------------ | Locking API testsuite: -----------------------------------------------------------------------= ----- | spin |wlock |rlock |mutex | wsem | r= sem | ---------------------------------------------------------------------= ----- A-A deadlock: ok | ok | ok | ok | ok | = ok | A-B-B-A deadlock: ok | ok | ok | ok | ok | = ok | A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | = ok | A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | = ok | A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | = ok | A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | = ok | A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | = ok | double unlock: ok | ok | ok | ok | ok | = ok | initialize held: ok | ok | ok | ok | ok | = ok | bad unlock order: ok | ok | ok | ok | ok | = ok | ---------------------------------------------------------------------= ----- recursive read-lock: | ok | | = ok | recursive read-lock #2: | ok | | = ok | mixed read-write-lock: | ok | | = ok | mixed write-read-lock: | ok | | = ok | ---------------------------------------------------------------------= ----- hard-irqs-on + irq-safe-A/12: ok | ok | ok | soft-irqs-on + irq-safe-A/12: ok | ok | ok | hard-irqs-on + irq-safe-A/21: ok | ok | ok | soft-irqs-on + irq-safe-A/21: ok | ok | ok | sirq-safe-A =3D> hirqs-on/12: ok | ok | ok | sirq-safe-A =3D> hirqs-on/21: ok | ok | ok | hard-safe-A + irqs-on/12: ok | ok | ok | soft-safe-A + irqs-on/12: ok | ok | ok | hard-safe-A + irqs-on/21: ok | ok | ok | soft-safe-A + irqs-on/21: ok | ok | ok | hard-safe-A + unsafe-B #1/123: ok | ok | ok | soft-safe-A + unsafe-B #1/123: ok | ok | ok | hard-safe-A + unsafe-B #1/132: ok | ok | ok | soft-safe-A + unsafe-B #1/132: ok | ok | ok | hard-safe-A + unsafe-B #1/213: ok | ok | ok | soft-safe-A + unsafe-B #1/213: ok | ok | ok | hard-safe-A + unsafe-B #1/231: ok | ok | ok | soft-safe-A + unsafe-B #1/231: ok | ok | ok | hard-safe-A + unsafe-B #1/312: ok | ok | ok | soft-safe-A + unsafe-B #1/312: ok | ok | ok | hard-safe-A + unsafe-B #1/321: ok | ok | ok | soft-safe-A + unsafe-B #1/321: ok | ok | ok | hard-safe-A + unsafe-B #2/123: ok | ok | ok | soft-safe-A + unsafe-B #2/123: ok | ok | ok | hard-safe-A + unsafe-B #2/132: ok | ok | ok | soft-safe-A + unsafe-B #2/132: ok | ok | ok | hard-safe-A + unsafe-B #2/213: ok | ok | ok | soft-safe-A + unsafe-B #2/213: ok | ok | ok | hard-safe-A + unsafe-B #2/231: ok | ok | ok | soft-safe-A + unsafe-B #2/231: ok | ok | ok | hard-safe-A + unsafe-B #2/312: ok | ok | ok | soft-safe-A + unsafe-B #2/312: ok | ok | ok | hard-safe-A + unsafe-B #2/321: ok | ok | ok | soft-safe-A + unsafe-B #2/321: ok | ok | ok | hard-irq lock-inversion/123: ok | ok | ok | soft-irq lock-inversion/123: ok | ok | ok | hard-irq lock-inversion/132: ok | ok | ok | soft-irq lock-inversion/132: ok | ok | ok | hard-irq lock-inversion/213: ok | ok | ok | soft-irq lock-inversion/213: ok | ok | ok | hard-irq lock-inversion/231: ok | ok | ok | soft-irq lock-inversion/231: ok | ok | ok | hard-irq lock-inversion/312: ok | ok | ok | soft-irq lock-inversion/312: ok | ok | ok | hard-irq lock-inversion/321: ok | ok | ok | soft-irq lock-inversion/321: ok | ok | ok | hard-irq read-recursion/123: ok | soft-irq read-recursion/123: ok | hard-irq read-recursion/132: ok | soft-irq read-recursion/132: ok | hard-irq read-recursion/213: ok | soft-irq read-recursion/213: ok | hard-irq read-recursion/231: ok | soft-irq read-recursion/231: ok | hard-irq read-recursion/312: ok | soft-irq read-recursion/312: ok | hard-irq read-recursion/321: ok | soft-irq read-recursion/321: ok | ------------------------------------------------------- Good, all 218 testcases passed! | --------------------------------- Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 872052k/917504k available (4655k kernel code, 45060k reserved, = 3079k data, 656k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffb8000 - 0xfffff000 ( 284 kB) vmalloc : 0xf8800000 - 0xfffb6000 ( 119 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0892000 - 0xc0936000 ( 656 kB) .data : 0xc058bc52 - 0xc088dacc (3079 kB) .text : 0xc0100000 - 0xc058bc52 (4655 kB) Checking if this processor honours the WP bit even in supervisor mode..= =2EOk. CPA: page pool initialized 16 of 16 pages preallocated SLUB: Genslabs=3D12, HWalign=3D64, Order=3D0-3, MinObjects=3D0, CPUs=3D= 2, Nodes=3D1 Calibrating delay loop (skipped), value calculated using timer frequenc= y.. <6>3657.48 BogoMIPS (lpj=3D1828742) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Checking 'hlt' instruction... OK. ACPI: Core revision 20080609 enabled ExtINT on CPU#0 ESR value before enabling vector: 0x00000040 after: 0x00000000 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 1-0 not connected. IO-APIC (apicid-pin) 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23 no= t connected. =2E.TIMER: vector=3D0x31 apic1=3D0 pin1=3D2 apic2=3D-1 pin2=3D-1 CPU0: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 ++++++++++++++++++++=3D_---CPU UP 1 lockdep: fixing up alternatives. CPU 1 irqstacks, hard=3Dc0942000 soft=3Dc093a000 Booting processor 1/1 ip 6000 Setting warm reset code and vector. 1. 2. 3. Asserting INIT. Waiting for send to finish... Deasserting INIT. Waiting for send to finish... #startup loops: 2. Sending STARTUP #1. After apic_write. Initializing CPU#1 Startup point 1. CPU#1 (phys ID: 1) waiting for CALLOUT Waiting for send to finish... Sending STARTUP #2. After apic_write. Startup point 1. Waiting for send to finish... After Startup. Before Callout 1. After Callout 1. CALLIN, before setup_local_APIC(). masked ExtINT on CPU#1 Calibrating delay using timer specific routine.. <6>3194.05 BogoMIPS (l= pj=3D1597026) Stack at about f7c7efb0 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 OK. CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 CPU has booted. checking TSC synchronization [CPU#0 -> CPU#1]: Measured 580129 cycles TSC warp between CPUs, turning off TSC clock. Marking TSC unstable due to check_tsc_sync_source failed Brought up 2 CPUs Boot done. Before bogomips. Total of 2 processors activated (6851.53 BogoMIPS). Before bogocount - setting activated=3D1. khelper used greatest stack depth: 3052 bytes left khelper used greatest stack depth: 2684 bytes left calling init_cpufreq_transition_notifier_list+0x0/0x18 initcall init_cpufreq_transition_notifier_list+0x0/0x18 returned 0 afte= r 0 msecs calling net_ns_init+0x0/0x10f net_namespace: 800 bytes initcall net_ns_init+0x0/0x10f returned 0 after 0 msecs calling cpufreq_tsc+0x0/0x13 initcall cpufreq_tsc+0x0/0x13 returned 0 after 0 msecs calling reboot_init+0x0/0x11 initcall reboot_init+0x0/0x11 returned 0 after 0 msecs calling sysctl_init+0x0/0x29 initcall sysctl_init+0x0/0x29 returned 0 after 0 msecs calling ksysfs_init+0x0/0x96 initcall ksysfs_init+0x0/0x96 returned 0 after 0 msecs calling init_jiffies_clocksource+0x0/0xf initcall init_jiffies_clocksource+0x0/0xf returned 0 after 0 msecs calling pm_init+0x0/0x2d initcall pm_init+0x0/0x2d returned 0 after 0 msecs calling filelock_init+0x0/0x27 initcall filelock_init+0x0/0x27 returned 0 after 0 msecs calling init_aout_binfmt+0x0/0xf initcall init_aout_binfmt+0x0/0xf returned 0 after 0 msecs calling init_misc_binfmt+0x0/0x33 initcall init_misc_binfmt+0x0/0x33 returned 0 after 0 msecs calling init_script_binfmt+0x0/0xf initcall init_script_binfmt+0x0/0xf returned 0 after 0 msecs calling init_elf_binfmt+0x0/0xf initcall init_elf_binfmt+0x0/0xf returned 0 after 0 msecs calling debugfs_init+0x0/0x41 initcall debugfs_init+0x0/0x41 returned 0 after 0 msecs calling securityfs_init+0x0/0x41 initcall securityfs_init+0x0/0x41 returned 0 after 0 msecs calling random32_init+0x0/0x3f initcall random32_init+0x0/0x3f returned 0 after 0 msecs calling cpufreq_core_init+0x0/0x51 initcall cpufreq_core_init+0x0/0x51 returned 0 after 0 msecs calling virtio_init+0x0/0x1f initcall virtio_init+0x0/0x1f returned 0 after 0 msecs calling sock_init+0x0/0x51 initcall sock_init+0x0/0x51 returned 0 after 0 msecs calling netpoll_init+0x0/0x11 initcall netpoll_init+0x0/0x11 returned 0 after 0 msecs calling netlink_proto_init+0x0/0x107 NET: Registered protocol family 16 initcall netlink_proto_init+0x0/0x107 returned 0 after 0 msecs calling bdi_class_init+0x0/0x33 initcall bdi_class_init+0x0/0x33 returned 0 after 0 msecs calling kobject_uevent_init+0x0/0x3f initcall kobject_uevent_init+0x0/0x3f returned 0 after 0 msecs calling pcibus_class_init+0x0/0xf initcall pcibus_class_init+0x0/0xf returned 0 after 0 msecs calling pci_driver_init+0x0/0xf initcall pci_driver_init+0x0/0xf returned 0 after 0 msecs calling lcd_class_init+0x0/0x3d initcall lcd_class_init+0x0/0x3d returned 0 after 0 msecs calling backlight_class_init+0x0/0x3d initcall backlight_class_init+0x0/0x3d returned 0 after 0 msecs calling tty_class_init+0x0/0x27 initcall tty_class_init+0x0/0x27 returned 0 after 0 msecs calling vtconsole_class_init+0x0/0x9a initcall vtconsole_class_init+0x0/0x9a returned 0 after 0 msecs calling eisa_init+0x0/0x26 EISA bus registered initcall eisa_init+0x0/0x26 returned 0 after 0 msecs calling enable_pci_io_ecs+0x0/0x2b initcall enable_pci_io_ecs+0x0/0x2b returned 0 after 0 msecs calling rdc_board_setup+0x0/0x19 initcall rdc_board_setup+0x0/0x19 returned 0 after 0 msecs calling arch_kdebugfs_init+0x0/0x1de initcall arch_kdebugfs_init+0x0/0x1de returned 0 after 0 msecs calling init_pit_clocksource+0x0/0x8f initcall init_pit_clocksource+0x0/0x8f returned 0 after 0 msecs calling ffh_cstate_init+0x0/0x2c initcall ffh_cstate_init+0x0/0x2c returned 0 after 0 msecs calling acpi_pci_init+0x0/0x38 ACPI: bus type pci registered initcall acpi_pci_init+0x0/0x38 returned 0 after 0 msecs calling init_acpi_device_notify+0x0/0x43 initcall init_acpi_device_notify+0x0/0x43 returned 0 after 0 msecs calling pci_arch_init+0x0/0x4a PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 PCI: MCFG area at f0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access initcall pci_arch_init+0x0/0x4a returned 0 after 0 msecs calling topology_init+0x0/0x28 initcall topology_init+0x0/0x28 returned 0 after 0 msecs calling param_sysfs_init+0x0/0x154 initcall param_sysfs_init+0x0/0x154 returned 0 after 21 msecs calling pm_sysrq_init+0x0/0x16 initcall pm_sysrq_init+0x0/0x16 returned 0 after 0 msecs calling readahead_init+0x0/0x2f initcall readahead_init+0x0/0x2f returned 0 after 0 msecs calling init_bio+0x0/0xa6 initcall init_bio+0x0/0xa6 returned 0 after 0 msecs calling blk_settings_init+0x0/0x1d initcall blk_settings_init+0x0/0x1d returned 0 after 0 msecs calling blk_ioc_init+0x0/0x24 initcall blk_ioc_init+0x0/0x24 returned 0 after 0 msecs calling genhd_device_init+0x0/0x32 initcall genhd_device_init+0x0/0x32 returned 0 after 0 msecs calling pci_slot_init+0x0/0x3b initcall pci_slot_init+0x0/0x3b returned 0 after 0 msecs calling fbmem_init+0x0/0x73 initcall fbmem_init+0x0/0x73 returned 0 after 0 msecs calling acpi_init+0x0/0x21b ACPI: EC: EC description table is found, configuring boot EC ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing initcall acpi_init+0x0/0x21b returned 0 after 67 msecs calling acpi_scan_init+0x0/0xed initcall acpi_scan_init+0x0/0xed returned 0 after 49 msecs calling acpi_ec_init+0x0/0x55 ACPI: EC: GPE =3D 0x1c, I/O: command/status =3D 0x66, data =3D 0x62 ACPI: EC: driver started in interrupt mode initcall acpi_ec_init+0x0/0x55 returned 0 after 0 msecs calling acpi_pci_root_init+0x0/0x25 ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: 0000:00:02.0 reg 10 32bit mmio: [ee100000, ee17ffff] PCI: 0000:00:02.0 reg 14 io port: [1800, 1807] PCI: 0000:00:02.0 reg 18 32bit mmio: [d0000000, dfffffff] PCI: 0000:00:02.0 reg 1c 32bit mmio: [ee200000, ee23ffff] PCI: 0000:00:02.1 reg 10 32bit mmio: [ee180000, ee1fffff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled PCI: 0000:00:1d.0 reg 20 io port: [1820, 183f] PCI: 0000:00:1d.1 reg 20 io port: [1840, 185f] PCI: 0000:00:1d.2 reg 20 io port: [1860, 187f] PCI: 0000:00:1d.3 reg 20 io port: [1880, 189f] PCI: 0000:00:1d.7 reg 10 32bit mmio: [ee444000, ee4443ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO PCI: 0000:00:1f.1 reg 10 io port: [0, 7] PCI: 0000:00:1f.1 reg 14 io port: [0, 3] PCI: 0000:00:1f.1 reg 18 io port: [0, 7] PCI: 0000:00:1f.1 reg 1c io port: [0, 3] PCI: 0000:00:1f.1 reg 20 io port: [1810, 181f] PCI: 0000:00:1f.2 reg 10 io port: [18d0, 18d7] PCI: 0000:00:1f.2 reg 14 io port: [18c4, 18c7] PCI: 0000:00:1f.2 reg 18 io port: [18c8, 18cf] PCI: 0000:00:1f.2 reg 1c io port: [18c0, 18c3] PCI: 0000:00:1f.2 reg 20 io port: [18b0, 18bf] PCI: 0000:00:1f.2 reg 24 32bit mmio: [ee444400, ee4447ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled PCI: 0000:00:1f.3 reg 20 io port: [18e0, 18ff] PCI: 0000:02:00.0 reg 10 32bit mmio: [ee000000, ee01ffff] PCI: 0000:02:00.0 reg 18 io port: [2000, 201f] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled PCI: bridge 0000:00:1c.0 io port: [2000, 2fff] PCI: bridge 0000:00:1c.0 32bit mmio: [ee000000, ee0fffff] PCI: 0000:03:00.0 reg 10 32bit mmio: [edf00000, edf00fff] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled PCI: bridge 0000:00:1c.1 io port: [3000, 4fff] PCI: bridge 0000:00:1c.1 32bit mmio: [ec000000, edffffff] PCI: bridge 0000:00:1c.1 64bit mmio pref: [e4000000, e40fffff] PCI: bridge 0000:00:1c.2 io port: [5000, 6fff] PCI: bridge 0000:00:1c.2 32bit mmio: [e8000000, e9ffffff] PCI: bridge 0000:00:1c.2 64bit mmio pref: [e4100000, e41fffff] PCI: bridge 0000:00:1c.3 io port: [7000, 8fff] PCI: bridge 0000:00:1c.3 32bit mmio: [ea000000, ebffffff] PCI: bridge 0000:00:1c.3 64bit mmio pref: [e4200000, e42fffff] PCI: 0000:15:00.0 reg 10 32bit mmio: [e4300000, e4300fff] pci 0000:15:00.0: supports D1 pci 0000:15:00.0: supports D2 pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.0: PME# disabled pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 io port: [9000, cfff] PCI: bridge 0000:00:1e.0 32bit mmio: [e4300000, e7ffffff] PCI: bridge 0000:00:1e.0 64bit mmio pref: [e0000000, e3ffffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] initcall acpi_pci_root_init+0x0/0x25 returned 0 after 43 msecs calling acpi_pci_link_init+0x0/0x43 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) initcall acpi_pci_link_init+0x0/0x43 returned 0 after 10 msecs calling acpi_power_init+0x0/0x69 ACPI: Power Resource [PUBS] (on) initcall acpi_power_init+0x0/0x69 returned 0 after 1 msecs calling acpi_system_init+0x0/0x167 initcall acpi_system_init+0x0/0x167 returned 0 after 0 msecs calling acpi_cm_sbs_init+0x0/0x7 initcall acpi_cm_sbs_init+0x0/0x7 returned 0 after 0 msecs calling pnp_init+0x0/0x19 Linux Plug and Play Support v0.97 (c) Adam Belay initcall pnp_init+0x0/0x19 returned 0 after 0 msecs calling pnpacpi_init+0x0/0x7b pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: parse allocated resources pnp 00:00: add mem 0x0-0x9ffff flags 0x1 pnp 00:00: add mem 0xc0000-0xc3fff flags 0x0 pnp 00:00: add mem 0xc4000-0xc7fff flags 0x0 pnp 00:00: add mem 0xc8000-0xcbfff flags 0x0 pnp 00:00: add mem 0xcc000-0xcffff flags 0x0 pnp 00:00: add mem 0xd0000-0xd3fff flags 0x0 pnp 00:00: add mem 0xd4000-0xd3fff flags 0x10000000 pnp 00:00: add mem 0xd8000-0xd7fff flags 0x10000000 pnp 00:00: add mem 0xdc000-0xdffff flags 0x1 pnp 00:00: add mem 0xe0000-0xe3fff flags 0x0 pnp 00:00: add mem 0xe4000-0xe7fff flags 0x0 pnp 00:00: add mem 0xe8000-0xebfff flags 0x0 pnp 00:00: add mem 0xec000-0xeffff flags 0x0 pnp 00:00: add mem 0xf0000-0xfffff flags 0x0 pnp 00:00: add mem 0x100000-0x7fffffff flags 0x1 pnp 00:00: add mem 0xfec00000-0xffffffff flags 0x0 pnp 00:00: add mem 0xfed41000-0xfed40fff flags 0x10000000 pnp 00:00: PNP0c01: calling quirk_system_pci_resources+0x0/0x188 pnp 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:01: parse allocated resources pnp 00:01: add io 0xcf8-0xcff flags 0x1 pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:02: parse allocated resources pnp 00:02: add io 0x10-0x1f flags 0x1 pnp 00:02: add io 0x90-0x9f flags 0x1 pnp 00:02: add io 0x24-0x25 flags 0x1 pnp 00:02: add io 0x28-0x29 flags 0x1 pnp 00:02: add io 0x2c-0x2d flags 0x1 pnp 00:02: add io 0x30-0x31 flags 0x1 pnp 00:02: add io 0x34-0x35 flags 0x1 pnp 00:02: add io 0x38-0x39 flags 0x1 pnp 00:02: add io 0x3c-0x3d flags 0x1 pnp 00:02: add io 0xa4-0xa5 flags 0x1 pnp 00:02: add io 0xa8-0xa9 flags 0x1 pnp 00:02: add io 0xac-0xad flags 0x1 pnp 00:02: add io 0xb0-0xb5 flags 0x1 pnp 00:02: add io 0xb8-0xb9 flags 0x1 pnp 00:02: add io 0xbc-0xbd flags 0x1 pnp 00:02: add io 0x50-0x53 flags 0x1 pnp 00:02: add io 0x72-0x77 flags 0x1 pnp 00:02: add io 0x164e-0x164f flags 0x1 pnp 00:02: add io 0x2e-0x2f flags 0x1 pnp 00:02: add io 0x1000-0x107f flags 0x1 pnp 00:02: add io 0x1180-0x11bf flags 0x1 pnp 00:02: add io 0x800-0x80f flags 0x1 pnp 00:02: add io 0x15e0-0x15ef flags 0x1 pnp 00:02: add io 0x1600-0x165f flags 0x1 pnp 00:02: add mem 0xf0000000-0xf3ffffff flags 0x1 pnp 00:02: add mem 0xfed1c000-0xfed1ffff flags 0x1 pnp 00:02: add mem 0xfed14000-0xfed17fff flags 0x1 pnp 00:02: add mem 0xfed18000-0xfed18fff flags 0x1 pnp 00:02: add mem 0xfed19000-0xfed19fff flags 0x1 pnp 00:02: PNP0c02: calling quirk_system_pci_resources+0x0/0x188 pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:03: parse allocated resources pnp 00:03: add mem 0xfed00000-0xfed003ff flags 0x0 pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:04: parse allocated resources pnp 00:04: add io 0x0-0xf flags 0x1 pnp 00:04: add io 0x80-0x8f flags 0x1 pnp 00:04: add io 0xc0-0xdf flags 0x1 pnp 00:04: add dma 4 flags 0x5 pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:05: parse allocated resources pnp 00:05: add io 0x61-0x61 flags 0x1 pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: parse allocated resources pnp 00:06: add io 0xf0-0xf0 flags 0x1 pnp 00:06: add irq 13 flags 0x1 pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:07: parse allocated resources pnp 00:07: add io 0x70-0x71 flags 0x1 pnp 00:07: add irq 8 flags 0x1 pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:08: parse allocated resources pnp 00:08: add io 0x60-0x60 flags 0x1 pnp 00:08: add io 0x64-0x64 flags 0x1 pnp 00:08: add irq 1 flags 0x1 pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:09: parse allocated resources pnp 00:09: add irq 12 flags 0x1 pnp 00:09: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active) pnp 00:0a: parse allocated resources pnp 00:0a: add io 0x2f8-0x2ff flags 0x1 pnp 00:0a: add irq 3 flags 0x1 pnp 00:0a: add dma 3 flags 0x0 pnp 00:0a: parse resource options pnp 00:0a: dependent set 0 (preferred) io min 0x2f8 max 0x2f8 align = 1 size 8 flags 0x1 pnp 00:0a: dependent set 0 (preferred) irq 3 flags 0x1 pnp 00:0a: dependent set 0 (preferred) dma 0 1 3 (bitmask 0xb) flags = 0x0 pnp 00:0a: dependent set 1 (acceptable) io min 0x3f8 max 0x3f8 align= 1 size 8 flags 0x1 pnp 00:0a: dependent set 1 (acceptable) irq 4 flags 0x1 pnp 00:0a: dependent set 1 (acceptable) dma 0 1 3 (bitmask 0xb) flags= 0x0 pnp 00:0a: dependent set 2 (acceptable) io min 0x2e8 max 0x2e8 align= 1 size 8 flags 0x1 pnp 00:0a: dependent set 2 (acceptable) irq 3 flags 0x1 pnp 00:0a: dependent set 2 (acceptable) dma 0 1 3 (bitmask 0xb) flags= 0x0 pnp 00:0a: dependent set 3 (acceptable) io min 0x3e8 max 0x3e8 align= 1 size 8 flags 0x1 pnp 00:0a: dependent set 3 (acceptable) irq 4 flags 0x1 pnp 00:0a: dependent set 3 (acceptable) dma 0 1 3 (bitmask 0xb) flags= 0x0 pnp 00:0a: dependent set 4 (functional) io min 0x2f8 max 0x2f8 align= 1 size 8 flags 0x1 pnp 00:0a: dependent set 4 (functional) irq 4 5 7 flags 0x1 pnp 00:0a: dependent set 4 (functional) dma 0 1 3 (bitmask 0xb) flags= 0x0 pnp 00:0a: dependent set 5 (functional) io min 0x3f8 max 0x3f8 align= 1 size 8 flags 0x1 pnp 00:0a: dependent set 5 (functional) irq 3 5 7 flags 0x1 pnp 00:0a: dependent set 5 (functional) dma 0 1 3 (bitmask 0xb) flags= 0x0 pnp 00:0a: dependent set 6 (functional) io min 0x2e8 max 0x2e8 align= 1 size 8 flags 0x1 pnp 00:0a: dependent set 6 (functional) irq 4 5 7 flags 0x1 pnp 00:0a: dependent set 6 (functional) dma 0 1 3 (bitmask 0xb) flags= 0x0 pnp 00:0a: dependent set 7 (functional) io min 0x3e8 max 0x3e8 align= 1 size 8 flags 0x1 pnp 00:0a: dependent set 7 (functional) irq 3 5 7 flags 0x1 pnp 00:0a: dependent set 7 (functional) dma 0 1 3 (bitmask 0xb) flags= 0x0 pnp 00:0a: Plug and Play ACPI device, IDs IBM0071 PNP0511 (active) pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered initcall pnpacpi_init+0x0/0x7b returned 0 after 26 msecs calling misc_init+0x0/0x7f initcall misc_init+0x0/0x7f returned 0 after 0 msecs calling cn_init+0x0/0xcb initcall cn_init+0x0/0xcb returned 0 after 0 msecs calling tifm_init+0x0/0x6d initcall tifm_init+0x0/0x6d returned 0 after 0 msecs calling phy_init+0x0/0x29 initcall phy_init+0x0/0x29 returned 0 after 0 msecs calling init_scsi+0x0/0x79 SCSI subsystem initialized initcall init_scsi+0x0/0x79 returned 0 after 0 msecs calling ata_init+0x0/0x2a4 libata version 3.00 loaded. initcall ata_init+0x0/0x2a4 returned 0 after 0 msecs calling spi_init+0x0/0x68 initcall spi_init+0x0/0x68 returned 0 after 0 msecs calling usb_init+0x0/0xfd usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb initcall usb_init+0x0/0xfd returned 0 after 1 msecs calling serio_init+0x0/0x82 initcall serio_init+0x0/0x82 returned 0 after 0 msecs calling gameport_init+0x0/0x82 initcall gameport_init+0x0/0x82 returned 0 after 0 msecs calling input_init+0x0/0xd7 initcall input_init+0x0/0xd7 returned 0 after 0 msecs calling i2c_init+0x0/0x4f i2c-core: driver [dummy] registered initcall i2c_init+0x0/0x4f returned 0 after 0 msecs calling power_supply_class_init+0x0/0x29 initcall power_supply_class_init+0x0/0x29 returned 0 after 0 msecs calling thermal_init+0x0/0x41 initcall thermal_init+0x0/0x41 returned 0 after 0 msecs calling mmc_init+0x0/0x6b initcall mmc_init+0x0/0x6b returned 0 after 0 msecs calling leds_init+0x0/0x27 initcall leds_init+0x0/0x27 returned 0 after 0 msecs calling dma_bus_init+0x0/0x23 initcall dma_bus_init+0x0/0x23 returned 0 after 0 msecs calling pci_subsys_init+0x0/0xe6 PCI: Using ACPI for IRQ routing number of MP IRQ sources: 15. number of IO-APIC #1 registers: 24. testing the IO APIC....................... IO APIC #1...... =2E... register #00: 02000000 =2E...... : physical APIC id: 02 =2E...... : Delivery Type: 0 =2E...... : LTS : 0 =2E... register #01: 00170020 =2E...... : max redirection entries: 0017 =2E...... : PRQ implemented: 0 =2E...... : IO APIC version: 0020 =2E... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: =20 00 000 00 1 0 0 0 0 0 0 00 01 003 03 1 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 31 03 003 03 1 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 003 03 0 0 0 0 0 1 1 51 06 003 03 0 0 0 0 0 1 1 59 07 003 03 0 0 0 0 0 1 1 61 08 003 03 1 0 0 0 0 1 1 69 09 003 03 0 1 0 0 0 1 1 71 0a 003 03 0 0 0 0 0 1 1 79 0b 003 03 0 0 0 0 0 1 1 81 0c 003 03 1 0 0 0 0 1 1 89 0d 003 03 1 0 0 0 0 1 1 91 0e 003 03 0 0 0 0 0 1 1 99 0f 003 03 0 0 0 0 0 1 1 A1 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 =2E................................... done. initcall pci_subsys_init+0x0/0xe6 returned 0 after 6 msecs calling proto_init+0x0/0x27 initcall proto_init+0x0/0x27 returned 0 after 0 msecs calling net_dev_init+0x0/0x12f initcall net_dev_init+0x0/0x12f returned 0 after 0 msecs calling neigh_init+0x0/0x66 initcall neigh_init+0x0/0x66 returned 0 after 0 msecs calling fib_rules_init+0x0/0x99 initcall fib_rules_init+0x0/0x99 returned 0 after 0 msecs calling genl_init+0x0/0xb0 initcall genl_init+0x0/0xb0 returned 0 after 0 msecs calling cipso_v4_init+0x0/0x6d initcall cipso_v4_init+0x0/0x6d returned 0 after 0 msecs calling bt_init+0x0/0x50 Bluetooth: Core ver 2.12 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized initcall bt_init+0x0/0x50 returned 0 after 0 msecs calling atm_init+0x0/0x9c NET: Registered protocol family 8 NET: Registered protocol family 20 initcall atm_init+0x0/0x9c returned 0 after 0 msecs calling wireless_nlevent_init+0x0/0x39 initcall wireless_nlevent_init+0x0/0x39 returned 0 after 0 msecs calling netlbl_init+0x0/0x6d NetLabel: Initializing NetLabel: domain hash size =3D 128 NetLabel: protocols =3D UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default initcall netlbl_init+0x0/0x6d returned 0 after 0 msecs calling rfkill_init+0x0/0x5a initcall rfkill_init+0x0/0x5a returned 0 after 0 msecs calling sysctl_init+0x0/0x2d initcall sysctl_init+0x0/0x2d returned 0 after 0 msecs calling pci_iommu_init+0x0/0xc initcall pci_iommu_init+0x0/0xc returned 0 after 0 msecs calling hpet_late_init+0x0/0xfb initcall hpet_late_init+0x0/0xfb returned -19 after 0 msecs calling clocksource_done_booting+0x0/0x11 initcall clocksource_done_booting+0x0/0x11 returned 0 after 0 msecs calling init_pipe_fs+0x0/0x41 initcall init_pipe_fs+0x0/0x41 returned 0 after 0 msecs calling init_mnt_writers+0x0/0x61 initcall init_mnt_writers+0x0/0x61 returned 0 after 0 msecs calling eventpoll_init+0x0/0x7d initcall eventpoll_init+0x0/0x7d returned 0 after 0 msecs calling anon_inode_init+0x0/0xdf initcall anon_inode_init+0x0/0xdf returned 0 after 0 msecs calling acpi_rtc_init+0x0/0xd4 ACPI: RTC can wake from S4 initcall acpi_rtc_init+0x0/0xd4 returned 0 after 0 msecs calling acpi_event_init+0x0/0x46 initcall acpi_event_init+0x0/0x46 returned 0 after 0 msecs calling pnp_system_init+0x0/0xf pnp: the driver 'system' has been registered system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xc3fff could not be reserved system 00:00: iomem range 0xc4000-0xc7fff could not be reserved system 00:00: iomem range 0xc8000-0xcbfff has been reserved system 00:00: iomem range 0xcc000-0xcffff could not be reserved system 00:00: iomem range 0xd0000-0xd3fff could not be reserved system 00:00: iomem range 0xdc000-0xdffff could not be reserved system 00:00: iomem range 0xe0000-0xe3fff could not be reserved system 00:00: iomem range 0xe4000-0xe7fff could not be reserved system 00:00: iomem range 0xe8000-0xebfff could not be reserved system 00:00: iomem range 0xec000-0xeffff could not be reserved system 00:00: iomem range 0xf0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x7fffffff could not be reserved system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved system 00:00: driver attached system 00:02: ioport range 0x164e-0x164f has been reserved system 00:02: ioport range 0x1000-0x107f has been reserved system 00:02: ioport range 0x1180-0x11bf has been reserved system 00:02: ioport range 0x800-0x80f has been reserved system 00:02: ioport range 0x15e0-0x15ef has been reserved system 00:02: ioport range 0x1600-0x165f could not be reserved system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved system 00:02: driver attached initcall pnp_system_init+0x0/0xf returned 0 after 1 msecs calling chr_dev_init+0x0/0x86 initcall chr_dev_init+0x0/0x86 returned 0 after 1 msecs calling firmware_class_init+0x0/0x5c initcall firmware_class_init+0x0/0x5c returned 0 after 0 msecs calling loopback_init+0x0/0xf initcall loopback_init+0x0/0xf returned 0 after 0 msecs calling cpufreq_gov_performance_init+0x0/0xf initcall cpufreq_gov_performance_init+0x0/0xf returned 0 after 0 msecs calling cpufreq_gov_dbs_init+0x0/0xf initcall cpufreq_gov_dbs_init+0x0/0xf returned 0 after 0 msecs calling init_acpi_pm_clocksource+0x0/0x152 PM-Timer running at invalid rate: 87% of normal - aborting. initcall init_acpi_pm_clocksource+0x0/0x152 returned -19 after 28 msecs calling ssb_modinit+0x0/0x41 initcall ssb_modinit+0x0/0x41 returned 0 after 0 msecs calling pcibios_assign_resources+0x0/0x91 pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0x2000-0x2fff pci 0000:00:1c.0: MEM window: 0xee000000-0xee0fffff pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: 0x3000-0x4fff pci 0000:00:1c.1: MEM window: 0xec000000-0xedffffff pci 0000:00:1c.1: PREFETCH window: 0x000000e4000000-0x000000e40fffff pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.2: IO window: 0x5000-0x6fff pci 0000:00:1c.2: MEM window: 0xe8000000-0xe9ffffff pci 0000:00:1c.2: PREFETCH window: 0x000000e4100000-0x000000e41fffff pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0c pci 0000:00:1c.3: IO window: 0x7000-0x8fff pci 0000:00:1c.3: MEM window: 0xea000000-0xebffffff pci 0000:00:1c.3: PREFETCH window: 0x000000e4200000-0x000000e42fffff pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16 pci 0000:15:00.0: IO window: 0x009000-0x0090ff pci 0000:15:00.0: IO window: 0x009400-0x0094ff pci 0000:15:00.0: PREFETCH window: 0xe0000000-0xe3ffffff pci 0000:15:00.0: MEM window: 0x88000000-0x8bffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15 pci 0000:00:1e.0: IO window: 0x9000-0xcfff pci 0000:00:1e.0: MEM window: 0xe4300000-0xe7ffffff pci 0000:00:1e.0: PREFETCH window: 0x000000e0000000-0x000000e3ffffff pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1c.0 to 64 pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1c.1 to 64 pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1c.2 to 64 pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1c.3 to 64 pci 0000:00:1e.0: enabling device (0005 -> 0007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 vendor=3D8086 device=3D2448 pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 02 index 0 io port: [2000, 2fff] bus: 02 index 1 mmio: [ee000000, ee0fffff] bus: 02 index 2 mmio: [0, 0] bus: 02 index 3 mmio: [0, 0] bus: 03 index 0 io port: [3000, 4fff] bus: 03 index 1 mmio: [ec000000, edffffff] bus: 03 index 2 mmio: [e4000000, e40fffff] bus: 03 index 3 mmio: [0, 0] bus: 04 index 0 io port: [5000, 6fff] bus: 04 index 1 mmio: [e8000000, e9ffffff] bus: 04 index 2 mmio: [e4100000, e41fffff] bus: 04 index 3 mmio: [0, 0] bus: 0c index 0 io port: [7000, 8fff] bus: 0c index 1 mmio: [ea000000, ebffffff] bus: 0c index 2 mmio: [e4200000, e42fffff] bus: 0c index 3 mmio: [0, 0] bus: 15 index 0 io port: [9000, cfff] bus: 15 index 1 mmio: [e4300000, e7ffffff] bus: 15 index 2 mmio: [e0000000, e3ffffff] bus: 15 index 3 io port: [0, ffff] bus: 15 index 4 mmio: [0, ffffffffffffffff] bus: 16 index 0 io port: [9000, 90ff] bus: 16 index 1 io port: [9400, 94ff] bus: 16 index 2 mmio: [e0000000, e3ffffff] bus: 16 index 3 mmio: [88000000, 8bffffff] initcall pcibios_assign_resources+0x0/0x91 returned 0 after 4 msecs calling inet_init+0x0/0x1be NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 9, 2359296 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered initcall inet_init+0x0/0x1be returned 0 after 11 msecs calling af_unix_init+0x0/0x47 NET: Registered protocol family 1 initcall af_unix_init+0x0/0x47 returned 0 after 0 msecs calling populate_rootfs+0x0/0x102 initcall populate_rootfs+0x0/0x102 returned 0 after 1 msecs calling pci_init+0x0/0x2c pci 0000:00:02.0: Boot video device pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup =3D 0x2000 pci 0000:00:1d.0: Performing full reset pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup =3D 0x2000 pci 0000:00:1d.1: Performing full reset pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup =3D 0x2000 pci 0000:00:1d.2: Performing full reset pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup =3D 0x2000 pci 0000:00:1d.3: Performing full reset initcall pci_init+0x0/0x2c returned 0 after 0 msecs calling ehci_hcd_init+0x0/0x70 ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96 ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=3D1 cc=3D4 pcc=3D2= ordered !ppc ports=3D8 ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 b= it addr ehci_hcd 0000:00:1d.7: reset command 080022 (park)=3D0 ithresh=3D8 Asyn= c period=3D1024 Reset HALT ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: supports USB remote wakeup ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee444000 ehci_hcd 0000:00:1d.7: reset command 080002 (park)=3D0 ithresh=3D8 peri= od=3D1024 Reset HALT ehci_hcd 0000:00:1d.7: init command 010001 (park)=3D0 ithresh=3D1 perio= d=3D1024 RUN ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: default language 0x0409 usb usb1: uevent usb usb1: usb_probe_device usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: uevent hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good hub 1-0:1.0: trying to enable port power on non-switchable hub hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000 ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001803 POWER sig=3Dj CSC= CONNECT hub 1-0:1.0: port 8, status 0501, change 0001, 480 Mb/s usb usb1: New USB device found, idVendor=3D1d6b, idProduct=3D0002 usb usb1: New USB device strings: Mfr=3D3, Product=3D2, SerialNumber=3D= 1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.26-tip ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 initcall ehci_hcd_init+0x0/0x70 returned 0 after 116 msecs calling ohci_hcd_mod_init+0x0/0xb0 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: block sizes: ed 64 td 64 initcall ohci_hcd_mod_init+0x0/0xb0 returned 0 after 0 msecs calling uhci_hcd_init+0x0/0xc7 USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 Pin 1-16 already programmed uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: detected 2 ports uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd =3D 0x0000 uhci_hcd 0000:00:1d.0: Performing full reset uhci_hcd 0000:00:1d.0: supports USB remote wakeup uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820 usb usb2: default language 0x0409 usb usb2: uevent usb usb2: usb_probe_device usb usb2: configuration #1 chosen from 1 choice usb usb2: adding 2-0:1.0 (config #1, interface 0) usb 2-0:1.0: uevent hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: individual port over-current protection hub 2-0:1.0: power on to power good time: 2ms hub 2-0:1.0: local power source is good hub 2-0:1.0: trying to enable port power on non-switchable hub hub 1-0:1.0: debounce: port 8: total 100ms stable 100ms status 0x501 usb usb2: New USB device found, idVendor=3D1d6b, idProduct=3D0001 usb usb2: New USB device strings: Mfr=3D3, Product=3D2, SerialNumber=3D= 1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.26-tip uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: detected 2 ports uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd =3D 0x0000 uhci_hcd 0000:00:1d.1: Performing full reset uhci_hcd 0000:00:1d.1: supports USB remote wakeup uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840 usb usb3: default language 0x0409 usb usb3: uevent usb usb3: usb_probe_device usb usb3: configuration #1 chosen from 1 choice usb usb3: adding 3-0:1.0 (config #1, interface 0) usb 3-0:1.0: uevent hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected hub 3-0:1.0: standalone hub hub 3-0:1.0: no power switching (usb 1.0) hub 3-0:1.0: individual port over-current protection hub 3-0:1.0: power on to power good time: 2ms hub 3-0:1.0: local power source is good hub 3-0:1.0: trying to enable port power on non-switchable hub ehci_hcd 0000:00:1d.7: port 8 full speed --> companion ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003801 POWER OWNER sig=3D= j CONNECT hub 1-0:1.0: port 8 not reset yet, waiting 50ms ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003002 POWER OWNER sig=3D= se0 CSC hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100 hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 usb usb3: New USB device found, idVendor=3D1d6b, idProduct=3D0001 usb usb3: New USB device strings: Mfr=3D3, Product=3D2, SerialNumber=3D= 1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.26-tip uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: detected 2 ports uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd =3D 0x0000 uhci_hcd 0000:00:1d.2: Performing full reset uhci_hcd 0000:00:1d.2: supports USB remote wakeup uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 usb usb4: default language 0x0409 usb usb4: uevent usb usb4: usb_probe_device usb usb4: configuration #1 chosen from 1 choice usb usb4: adding 4-0:1.0 (config #1, interface 0) usb 4-0:1.0: uevent hub 4-0:1.0: usb_probe_interface hub 4-0:1.0: usb_probe_interface - got id hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected hub 4-0:1.0: standalone hub hub 4-0:1.0: no power switching (usb 1.0) hub 4-0:1.0: individual port over-current protection hub 4-0:1.0: power on to power good time: 2ms hub 4-0:1.0: local power source is good hub 4-0:1.0: trying to enable port power on non-switchable hub hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 usb usb4: New USB device found, idVendor=3D1d6b, idProduct=3D0001 usb usb4: New USB device strings: Mfr=3D3, Product=3D2, SerialNumber=3D= 1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.26-tip uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 Pin 1-19 already programmed uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: detected 2 ports uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd =3D 0x0000 uhci_hcd 0000:00:1d.3: Performing full reset uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880 usb usb5: default language 0x0409 usb usb5: uevent usb usb5: usb_probe_device usb usb5: configuration #1 chosen from 1 choice usb usb5: adding 5-0:1.0 (config #1, interface 0) usb 5-0:1.0: uevent hub 5-0:1.0: usb_probe_interface hub 5-0:1.0: usb_probe_interface - got id hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected hub 5-0:1.0: standalone hub hub 5-0:1.0: no power switching (usb 1.0) hub 5-0:1.0: individual port over-current protection hub 5-0:1.0: power on to power good time: 2ms hub 5-0:1.0: local power source is good hub 5-0:1.0: trying to enable port power on non-switchable hub hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 uhci_hcd 0000:00:1d.3: port 2 portsc 009b,00 hub 5-0:1.0: port 2, status 0101, change 0003, 12 Mb/s usb usb5: New USB device found, idVendor=3D1d6b, idProduct=3D0001 usb usb5: New USB device strings: Mfr=3D3, Product=3D2, SerialNumber=3D= 1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.26-tip uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 initcall uhci_hcd_init+0x0/0xc7 returned 0 after 402 msecs calling i8259A_init_sysfs+0x0/0x1d initcall i8259A_init_sysfs+0x0/0x1d returned 0 after 0 msecs calling sbf_init+0x0/0xbd Simple Boot Flag at 0x35 set to 0x1 initcall sbf_init+0x0/0xbd returned 0 after 0 msecs calling i8237A_init_sysfs+0x0/0x1d initcall i8237A_init_sysfs+0x0/0x1d returned 0 after 0 msecs calling add_rtc_cmos+0x0/0x1a initcall add_rtc_cmos+0x0/0x1a returned 0 after 0 msecs calling cache_sysfs_init+0x0/0x47 initcall cache_sysfs_init+0x0/0x47 returned 0 after 0 msecs calling eps_init+0x0/0x3e initcall eps_init+0x0/0x3e returned -19 after 0 msecs calling nforce2_init+0x0/0x5e cpufreq: No nForce2 chipset. initcall nforce2_init+0x0/0x5e returned -19 after 0 msecs calling microcode_init+0x0/0xa2 IA-32 Microcode Update Driver: v1.14a initcall microcode_init+0x0/0xa2 returned 0 after 0 msecs calling init_lapic_sysfs+0x0/0x38 initcall init_lapic_sysfs+0x0/0x38 returned 0 after 0 msecs calling ioapic_init_sysfs+0x0/0x84 initcall ioapic_init_sysfs+0x0/0x84 returned 0 after 0 msecs calling add_pcspkr+0x0/0x35 initcall add_pcspkr+0x0/0x35 returned 0 after 0 msecs calling start_pageattr_test+0x0/0x38 initcall start_pageattr_test+0x0/0x38 returned 0 after 0 msecs calling debug_pagealloc_proc_init+0x0/0x27 initcall debug_pagealloc_proc_init+0x0/0x27 returned 0 after 0 msecs calling aes_init+0x0/0xf initcall aes_init+0x0/0xf returned 0 after 0 msecs calling init+0x0/0xf initcall init+0x0/0xf returned 0 after 0 msecs calling init+0x0/0xf initcall init+0x0/0xf returned 0 after 0 msecs calling create_proc_profile+0x0/0x19f initcall create_proc_profile+0x0/0x19f returned 0 after 0 msecs calling ioresources_init+0x0/0x2d initcall ioresources_init+0x0/0x2d returned 0 after 0 msecs calling uid_cache_init+0x0/0x5e initcall uid_cache_init+0x0/0x5e returned 0 after 0 msecs calling init_posix_timers+0x0/0x7c initcall init_posix_timers+0x0/0x7c returned 0 after 0 msecs calling init_posix_cpu_timers+0x0/0x90 initcall init_posix_cpu_timers+0x0/0x90 returned 0 after 0 msecs calling nsproxy_cache_init+0x0/0x27 initcall nsproxy_cache_init+0x0/0x27 returned 0 after 0 msecs calling timekeeping_init_device+0x0/0x1d initcall timekeeping_init_device+0x0/0x1d returned 0 after 0 msecs calling init_clocksource_sysfs+0x0/0x43 initcall init_clocksource_sysfs+0x0/0x43 returned 0 after 0 msecs calling init_timer_list_procfs+0x0/0x27 initcall init_timer_list_procfs+0x0/0x27 returned 0 after 0 msecs calling lockdep_proc_init+0x0/0x5f initcall lockdep_proc_init+0x0/0x5f returned 0 after 0 msecs calling futex_init+0x0/0x6f initcall futex_init+0x0/0x6f returned 0 after 0 msecs calling init_rttest+0x0/0x102 Initializing RT-Tester: OK initcall init_rttest+0x0/0x102 returned 0 after 1 msecs calling proc_dma_init+0x0/0x1c initcall proc_dma_init+0x0/0x1c returned 0 after 0 msecs calling percpu_modinit+0x0/0x64 initcall percpu_modinit+0x0/0x64 returned 0 after 0 msecs calling kallsyms_init+0x0/0x1f initcall kallsyms_init+0x0/0x1f returned 0 after 0 msecs calling crash_save_vmcoreinfo_init+0x0/0x316 initcall crash_save_vmcoreinfo_init+0x0/0x316 returned 0 after 0 msecs calling crash_notes_memory_init+0x0/0x36 initcall crash_notes_memory_init+0x0/0x36 returned 0 after 0 msecs calling pid_namespaces_init+0x0/0x27 initcall pid_namespaces_init+0x0/0x27 returned 0 after 0 msecs calling audit_init+0x0/0xc4 audit: initializing netlink socket (disabled) type=3D2000 audit(1216632057.064:1): initialized initcall audit_init+0x0/0xc4 returned 0 after 0 msecs calling init_kprobes+0x0/0xfc Kprobe smoke test started Kprobe smoke test passed successfully initcall init_kprobes+0x0/0xfc returned 0 after 14 msecs calling relay_init+0x0/0x11 initcall relay_init+0x0/0x11 returned 0 after 0 msecs calling utsname_sysctl_init+0x0/0x11 initcall utsname_sysctl_init+0x0/0x11 returned 0 after 0 msecs calling init_per_zone_pages_min+0x0/0x48 initcall init_per_zone_pages_min+0x0/0x48 returned 0 after 0 msecs calling pdflush_init+0x0/0x16 initcall pdflush_init+0x0/0x16 returned 0 after 0 msecs calling kswapd_init+0x0/0x1d initcall kswapd_init+0x0/0x1d returned 0 after 0 msecs calling setup_vmstat+0x0/0x37 initcall setup_vmstat+0x0/0x37 returned 0 after 0 msecs calling init_tmpfs+0x0/0xb9 initcall init_tmpfs+0x0/0xb9 returned 0 after 0 msecs calling slab_sysfs_init+0x0/0xb7 initcall slab_sysfs_init+0x0/0xb7 returned 0 after 30 msecs calling fasync_init+0x0/0x24 initcall fasync_init+0x0/0x24 returned 0 after 0 msecs calling aio_setup+0x0/0x64 initcall aio_setup+0x0/0x64 returned 0 after 0 msecs calling init_mbcache+0x0/0x11 initcall init_mbcache+0x0/0x11 returned 0 after 0 msecs calling dquot_init+0x0/0xdd VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) initcall dquot_init+0x0/0xdd returned 0 after 0 msecs calling init_v1_quota_format+0x0/0xf initcall init_v1_quota_format+0x0/0xf returned 0 after 0 msecs calling dnotify_init+0x0/0x24 initcall dnotify_init+0x0/0x24 returned 0 after 0 msecs calling configfs_init+0x0/0xbb initcall configfs_init+0x0/0xbb returned 0 after 0 msecs calling init_devpts_fs+0x0/0x33 initcall init_devpts_fs+0x0/0x33 returned 0 after 0 msecs calling init_reiserfs_fs+0x0/0x72 initcall init_reiserfs_fs+0x0/0x72 returned 0 after 0 msecs calling init_ext3_fs+0x0/0x5f initcall init_ext3_fs+0x0/0x5f returned 0 after 0 msecs calling init_ext4_fs+0x0/0x5f initcall init_ext4_fs+0x0/0x5f returned 0 after 0 msecs calling journal_init+0x0/0xb6 initcall journal_init+0x0/0xb6 returned 0 after 1 msecs calling journal_init+0x0/0xd3 initcall journal_init+0x0/0xd3 returned 0 after 1 msecs calling init_ramfs_fs+0x0/0xf initcall init_ramfs_fs+0x0/0xf returned 0 after 0 msecs calling init_fat_fs+0x0/0x46 initcall init_fat_fs+0x0/0x46 returned 0 after 0 msecs calling init_msdos_fs+0x0/0xf initcall init_msdos_fs+0x0/0xf returned 0 after 0 msecs calling init_bfs_fs+0x0/0x4f initcall init_bfs_fs+0x0/0x4f returned 0 after 0 msecs calling init_hfsplus_fs+0x0/0x50 initcall init_hfsplus_fs+0x0/0x50 returned 0 after 0 msecs calling vxfs_init+0x0/0x4d initcall vxfs_init+0x0/0x4d returned 0 after 0 msecs calling init_nfs_fs+0x0/0xfc initcall init_nfs_fs+0x0/0xfc returned 0 after 1 msecs calling init_nlm+0x0/0x1c initcall init_nlm+0x0/0x1c returned 0 after 0 msecs calling init_nls_cp437+0x0/0xf initcall init_nls_cp437+0x0/0xf returned 0 after 0 msecs calling init_nls_cp865+0x0/0xf initcall init_nls_cp865+0x0/0xf returned 0 after 0 msecs calling init_nls_cp932+0x0/0xf initcall init_nls_cp932+0x0/0xf returned 0 after 0 msecs calling init_nls_euc_jp+0x0/0x39 initcall init_nls_euc_jp+0x0/0x39 returned 0 after 0 msecs calling init_nls_cp936+0x0/0xf initcall init_nls_cp936+0x0/0xf returned 0 after 0 msecs calling init_nls_cp949+0x0/0xf initcall init_nls_cp949+0x0/0xf returned 0 after 0 msecs calling init_nls_cp1251+0x0/0xf initcall init_nls_cp1251+0x0/0xf returned 0 after 0 msecs calling init_nls_ascii+0x0/0xf initcall init_nls_ascii+0x0/0xf returned 0 after 0 msecs calling init_nls_iso8859_1+0x0/0xf initcall init_nls_iso8859_1+0x0/0xf returned 0 after 0 msecs calling init_nls_iso8859_13+0x0/0xf initcall init_nls_iso8859_13+0x0/0xf returned 0 after 0 msecs calling init_nls_iso8859_14+0x0/0xf initcall init_nls_iso8859_14+0x0/0xf returned 0 after 0 msecs calling init_nls_koi8_u+0x0/0xf initcall init_nls_koi8_u+0x0/0xf returned 0 after 0 msecs calling init_nls_koi8_ru+0x0/0x39 initcall init_nls_koi8_ru+0x0/0x39 returned 0 after 0 msecs calling init_nls_utf8+0x0/0x1f initcall init_nls_utf8+0x0/0x1f returned 0 after 0 msecs calling init_sysv_fs+0x0/0x43 initcall init_sysv_fs+0x0/0x43 returned 0 after 0 msecs calling init_ncp_fs+0x0/0x4f initcall init_ncp_fs+0x0/0x4f returned 0 after 0 msecs calling init_ntfs_fs+0x0/0x199 NTFS driver 2.1.29 [Flags: R/O]. initcall init_ntfs_fs+0x0/0x199 returned 0 after 0 msecs calling init_autofs4_fs+0x0/0xf initcall init_autofs4_fs+0x0/0xf returned 0 after 0 msecs calling fuse_init+0x0/0xf8 fuse init (API version 7.9) initcall fuse_init+0x0/0xf8 returned 0 after 0 msecs calling ipc_init+0x0/0x20 msgmni has been set to 1703 initcall ipc_init+0x0/0x20 returned 0 after 0 msecs calling ipc_sysctl_init+0x0/0x11 initcall ipc_sysctl_init+0x0/0x11 returned 0 after 0 msecs calling key_proc_init+0x0/0x2c initcall key_proc_init+0x0/0x2c returned 0 after 0 msecs calling selinux_nf_ip_init+0x0/0x68 SELinux: Registering netfilter hooks initcall selinux_nf_ip_init+0x0/0x68 returned 0 after 0 msecs calling init_sel_fs+0x0/0x5a initcall init_sel_fs+0x0/0x5a returned 0 after 0 msecs calling selnl_init+0x0/0x46 initcall selnl_init+0x0/0x46 returned 0 after 0 msecs calling sel_netif_init+0x0/0x57 initcall sel_netif_init+0x0/0x57 returned 0 after 0 msecs calling sel_netnode_init+0x0/0x68 initcall sel_netnode_init+0x0/0x68 returned 0 after 0 msecs calling sel_netport_init+0x0/0x68 initcall sel_netport_init+0x0/0x68 returned 0 after 0 msecs calling aurule_init+0x0/0x30 initcall aurule_init+0x0/0x30 returned 0 after 0 msecs calling crypto_algapi_init+0x0/0xc initcall crypto_algapi_init+0x0/0xc returned 0 after 0 msecs calling blkcipher_module_init+0x0/0x24 initcall blkcipher_module_init+0x0/0x24 returned 0 after 0 msecs calling seqiv_module_init+0x0/0xf initcall seqiv_module_init+0x0/0xf returned 0 after 0 msecs calling cryptomgr_init+0x0/0xf initcall cryptomgr_init+0x0/0xf returned 0 after 0 msecs calling hmac_module_init+0x0/0xf initcall hmac_module_init+0x0/0xf returned 0 after 0 msecs calling crypto_xcbc_module_init+0x0/0xf initcall crypto_xcbc_module_init+0x0/0xf returned 0 after 0 msecs calling crypto_null_mod_init+0x0/0x67 initcall crypto_null_mod_init+0x0/0x67 returned 0 after 0 msecs calling md5_mod_init+0x0/0xf initcall md5_mod_init+0x0/0xf returned 0 after 0 msecs calling rmd128_mod_init+0x0/0xf initcall rmd128_mod_init+0x0/0xf returned 0 after 0 msecs calling sha1_generic_mod_init+0x0/0xf initcall sha1_generic_mod_init+0x0/0xf returned 0 after 0 msecs calling tgr192_mod_init+0x0/0x52 initcall tgr192_mod_init+0x0/0x52 returned 0 after 0 msecs calling crypto_cbc_module_init+0x0/0xf initcall crypto_cbc_module_init+0x0/0xf returned 0 after 0 msecs calling crypto_pcbc_module_init+0x0/0xf initcall crypto_pcbc_module_init+0x0/0xf returned 0 after 0 msecs calling crypto_module_init+0x0/0xf initcall crypto_module_init+0x0/0xf returned 0 after 0 msecs calling crypto_ctr_module_init+0x0/0x33 initcall crypto_ctr_module_init+0x0/0x33 returned 0 after 0 msecs calling des_generic_mod_init+0x0/0x33 initcall des_generic_mod_init+0x0/0x33 returned 0 after 0 msecs calling fcrypt_mod_init+0x0/0xf initcall fcrypt_mod_init+0x0/0xf returned 0 after 0 msecs calling twofish_mod_init+0x0/0xf initcall twofish_mod_init+0x0/0xf returned 0 after 0 msecs calling aes_init+0x0/0x2ac initcall aes_init+0x0/0x2ac returned 0 after 0 msecs calling cast5_mod_init+0x0/0xf initcall cast5_mod_init+0x0/0xf returned 0 after 0 msecs calling anubis_mod_init+0x0/0xf initcall anubis_mod_init+0x0/0xf returned 0 after 0 msecs calling deflate_mod_init+0x0/0xf initcall deflate_mod_init+0x0/0xf returned 0 after 0 msecs calling crypto_authenc_module_init+0x0/0xf initcall crypto_authenc_module_init+0x0/0xf returned 0 after 0 msecs calling noop_init+0x0/0x11 io scheduler noop registered (default) initcall noop_init+0x0/0x11 returned 0 after 0 msecs calling init_kmp+0x0/0xf initcall init_kmp+0x0/0xf returned 0 after 0 msecs calling init_bm+0x0/0xf initcall init_bm+0x0/0xf returned 0 after 0 msecs calling init_fsm+0x0/0xf initcall init_fsm+0x0/0xf returned 0 after 0 msecs calling percpu_counter_startup+0x0/0x11 initcall percpu_counter_startup+0x0/0x11 returned 0 after 0 msecs calling audit_classes_init+0x0/0x4f initcall audit_classes_init+0x0/0x4f returned 0 after 0 msecs calling pci_proc_init+0x0/0x5b initcall pci_proc_init+0x0/0x5b returned 0 after 0 msecs calling progearbl_init+0x0/0x53 ALI M7101 PMU not found. initcall progearbl_init+0x0/0x53 returned 0 after 0 msecs calling cr_backlight_init+0x0/0x60 INTEL CARILLO RANCH LPC not found. Carillo Ranch Backlight Driver Initialized. initcall cr_backlight_init+0x0/0x60 returned 0 after 0 msecs calling tdfxfb_init+0x0/0xe3 initcall tdfxfb_init+0x0/0xe3 returned 0 after 0 msecs calling vmlfb_init+0x0/0x81 vmlfb: initializing initcall vmlfb_init+0x0/0x81 returned 0 after 0 msecs calling arkfb_init+0x0/0x4b initcall arkfb_init+0x0/0x4b returned 0 after 0 msecs calling sstfb_init+0x0/0x18e initcall sstfb_init+0x0/0x18e returned 0 after 0 msecs calling uvesafb_init+0x0/0x360 hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 uvesafb: failed to execute /sbin/v86d uvesafb: make sure that the v86d helper is installed and executable uvesafb: Getting VBE info block failed (eax=3D0x4f00, err=3D-2) uvesafb: vbe_init() failed with -22 uvesafb: probe of uvesafb.0 failed with error -22 initcall uvesafb_init+0x0/0x360 returned 0 after 0 msecs calling efifb_init+0x0/0x41 initcall efifb_init+0x0/0x41 returned -19 after 0 msecs calling acpi_reserve_resources+0x0/0xc8 initcall acpi_reserve_resources+0x0/0xc8 returned 0 after 0 msecs calling acpi_fan_init+0x0/0x2c initcall acpi_fan_init+0x0/0x2c returned 0 after 0 msecs calling irqrouter_init_sysfs+0x0/0x33 initcall irqrouter_init_sysfs+0x0/0x33 returned 0 after 0 msecs calling acpi_pci_slot_init+0x0/0x1b initcall acpi_pci_slot_init+0x0/0x1b returned 0 after 0 msecs calling acpi_container_init+0x0/0x3d Clocksource tsc unstable (delta =3D -63036542 ns) initcall acpi_container_init+0x0/0x3d returned 0 after 14 msecs calling asus_acpi_init+0x0/0xe2 initcall asus_acpi_init+0x0/0xe2 returned -19 after 0 msecs calling toshiba_acpi_init+0x0/0x159 initcall toshiba_acpi_init+0x0/0x159 returned -19 after 0 msecs calling rand_initialize+0x0/0x25 initcall rand_initialize+0x0/0x25 returned 0 after 0 msecs calling tty_init+0x0/0x18f initcall tty_init+0x0/0x18f returned 0 after 15 msecs calling pty_init+0x0/0x37d usb 5-2: new full speed USB device using uhci_hcd and address 2 initcall pty_init+0x0/0x37d returned 0 after 113 msecs calling moxa_init+0x0/0xf3 MOXA Intellio family driver version 6.0k initcall moxa_init+0x0/0xf3 returned 0 after 30 msecs calling mxser_module_init+0x0/0x5f8 MOXA Smartio/Industio family driver version 2.0.3 initcall mxser_module_init+0x0/0x5f8 returned 0 after 0 msecs calling ip2_init+0x0/0x45 Computone IntelliPort Plus multiport driver version 1.2.14 initcall ip2_init+0x0/0x45 returned 0 after 0 msecs calling riscom8_init_module+0x0/0x3bd rc: SDL RISCom/8 card driver v1.1, (c) D.Gorodchanin 1994-1996. rc0: RISCom/8 Board at 0x220 not found. rc1: RISCom/8 Board at 0x240 not found. rc2: RISCom/8 Board at 0x250 not found. rc3: RISCom/8 Board at 0x260 not found. rc: No RISCom/8 boards detected. initcall riscom8_init_module+0x0/0x3bd returned -5 after 19 msecs initcall riscom8_init_module+0x0/0x3bd returned with error code -5=20 calling applicom_init+0x0/0x42c Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ ac.o: No PCI boards found. ac.o: For an ISA board you must supply memory and irq parameters. initcall applicom_init+0x0/0x42c returned -6 after 0 msecs initcall applicom_init+0x0/0x42c returned with error code -6=20 calling hpet_init+0x0/0x57 hpet_acpi_add: no address or irqs in _CRS initcall hpet_init+0x0/0x57 returned 0 after 0 msecs calling nvram_init+0x0/0x75 Non-volatile memory driver v1.2 initcall nvram_init+0x0/0x75 returned 0 after 0 msecs calling toshiba_init+0x0/0x31a toshiba: not a supported Toshiba laptop initcall toshiba_init+0x0/0x31a returned -19 after 0 msecs calling i8k_init+0x0/0x174 initcall i8k_init+0x0/0x174 returned -19 after 0 msecs calling cs5535_gpio_init+0x0/0x147 cs5535_gpio: DIVIL not found initcall cs5535_gpio_init+0x0/0x147 returned -19 after 0 msecs calling agp_init+0x0/0x21 Linux agpgart interface v0.103 initcall agp_init+0x0/0x21 returned 0 after 0 msecs calling agp_ati_init+0x0/0x24 initcall agp_ati_init+0x0/0x24 returned 0 after 0 msecs calling agp_intel_init+0x0/0x24 agpgart: Detected an Intel 945GM Chipset. agpgart: Detected 7932K stolen memory. usb 5-2: ep0 maxpacket =3D 8 agpgart: AGP aperture is 256M @ 0xd0000000 initcall agp_intel_init+0x0/0x24 returned 0 after 18 msecs calling agp_sis_init+0x0/0x24 initcall agp_sis_init+0x0/0x24 returned 0 after 0 msecs calling agp_via_init+0x0/0x24 initcall agp_via_init+0x0/0x24 returned 0 after 0 msecs calling ipmi_init_msghandler_mod+0x0/0xc ipmi message handler version 39.2 initcall ipmi_init_msghandler_mod+0x0/0xc returned 0 after 0 msecs calling init_ipmi_si+0x0/0x6ee IPMI System Interface driver. ipmi_si: Unable to find any System Interface(s) initcall init_ipmi_si+0x0/0x6ee returned -19 after 1 msecs calling ipmi_wdog_init+0x0/0xfe IPMI Watchdog: driver initialized initcall ipmi_wdog_init+0x0/0xfe returned 0 after 0 msecs calling init_atmel+0x0/0x167 initcall init_atmel+0x0/0x167 returned -19 after 0 msecs calling drm_core_init+0x0/0xcc [drm] Initialized drm 1.1.0 20060810 initcall drm_core_init+0x0/0xcc returned 0 after 0 msecs calling i810_init+0x0/0x19 initcall i810_init+0x0/0x19 returned 0 after 0 msecs calling i915_init+0x0/0x19 pci 0000:00:02.0: power state changed by ACPI to D0 Pin 1-16 already programmed pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 [drm] Initialized i915 1.6.0 20060119 on minor 0 initcall i915_init+0x0/0x19 returned 0 after 0 msecs calling cn_proc_init+0x0/0x30 initcall cn_proc_init+0x0/0x30 returned 0 after 0 msecs calling i810fb_init+0x0/0x35a initcall i810fb_init+0x0/0x35a returned 0 after 0 msecs calling serial8250_init+0x0/0x10c Serial: 8250/16550 driver4 ports, IRQ sharing disabled serial8250: ttyS1 at I/O 0x2f8 (irq =3D 3) is a NS16550A initcall serial8250_init+0x0/0x10c returned 0 after 2 msecs calling serial8250_pnp_init+0x0/0xf pnp: the driver 'serial' has been registered initcall serial8250_pnp_init+0x0/0xf returned 0 after 0 msecs calling serial8250_pci_init+0x0/0x16 initcall serial8250_pci_init+0x0/0x16 returned 0 after 0 msecs calling fourport_init+0x0/0xf initcall fourport_init+0x0/0xf returned 0 after 6 msecs calling accent_init+0x0/0xf initcall accent_init+0x0/0xf returned 0 after 0 msecs calling exar_init+0x0/0xf initcall exar_init+0x0/0xf returned 0 after 2 msecs calling hub6_init+0x0/0xf usb 5-2: default language 0x0409 initcall hub6_init+0x0/0xf returned 0 after 8 msecs calling jsm_init_module+0x0/0x3a initcall jsm_init_module+0x0/0x3a returned 0 after 0 msecs calling isa_bus_init+0x0/0x33 initcall isa_bus_init+0x0/0x33 returned 0 after 0 msecs calling topology_sysfs_init+0x0/0x36 initcall topology_sysfs_init+0x0/0x36 returned 0 after 0 msecs calling xd_init+0x0/0x47a xd: Out of memory. initcall xd_init+0x0/0x47a returned -12 after 0 msecs initcall xd_init+0x0/0x47a returned with error code -12=20 calling cpqarray_init+0x0/0x22b Compaq SMART2 Driver (v 2.6.0) initcall cpqarray_init+0x0/0x22b returned 0 after 0 msecs calling mm_init+0x0/0x146 MM: desc_per_page =3D 128 initcall mm_init+0x0/0x146 returned 0 after 0 msecs calling nbd_init+0x0/0x28a nbd: registered device at major 43 initcall nbd_init+0x0/0x28a returned 0 after 10 msecs calling carm_init+0x0/0x16 initcall carm_init+0x0/0x16 returned 0 after 0 msecs calling compal_init+0x0/0xed initcall compal_init+0x0/0xed returned -19 after 0 msecs calling lkdtm_module_init+0x0/0x1bf lkdtm : Invalid command initcall lkdtm_module_init+0x0/0x1bf returned -22 after 0 msecs initcall lkdtm_module_init+0x0/0x1bf returned with error code -22=20 calling ioc4_init+0x0/0x16 initcall ioc4_init+0x0/0x16 returned 0 after 0 msecs calling sm501_base_init+0x0/0x20 usb 5-2: uevent usb 5-2: usb_probe_device usb 5-2: configuration #1 chosen from 1 choice initcall sm501_base_init+0x0/0x20 returned 0 after 0 msecs calling pasic3_base_init+0x0/0x14 initcall pasic3_base_init+0x0/0x14 returned -19 after 0 msecs calling e1000_init_module+0x0/0x53 e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:02:00.0: Disabling L1 ASPM vendor=3D8086 device=3D27d0 Pin 1-16 already programmed e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:02:00.0 to 64 usb 5-2: adding 5-2:1.0 (config #1, interface 0) usb 5-2:1.0: uevent usb 5-2: New USB device found, idVendor=3D0483, idProduct=3D2016 usb 5-2: New USB device strings: Mfr=3D1, Product=3D2, SerialNumber=3D0 usb 5-2: Product: Biometric Coprocessor usb 5-2: Manufacturer: STMicroelectronics eth0: (PCI Express:2.5GB/s:Width x1) 00:16:41:17:49:d2 eth0: Intel(R) PRO/1000 Network Connection eth0: MAC: 2, PHY: 2, PBA No: 005301-003 initcall e1000_init_module+0x0/0x53 returned 0 after 82 msecs calling ixgb_init_module+0x0/0x39 Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI Copyright (c) 1999-2008 Intel Corporation. initcall ixgb_init_module+0x0/0x39 returned 0 after 0 msecs calling t1_init_module+0x0/0x16 initcall t1_init_module+0x0/0x16 returned 0 after 0 msecs calling cxgb3_init_module+0x0/0x1b initcall cxgb3_init_module+0x0/0x1b returned 0 after 0 msecs calling vcan_init_module+0x0/0x2e vcan: Virtual CAN interface driver initcall vcan_init_module+0x0/0x2e returned 0 after 0 msecs calling happy_meal_probe+0x0/0x16 initcall happy_meal_probe+0x0/0x16 returned 0 after 0 msecs calling vortex_init+0x0/0xbf initcall vortex_init+0x0/0xbf returned 0 after 0 msecs calling pcnet32_init_module+0x0/0x118 pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de initcall pcnet32_init_module+0x0/0x118 returned 0 after 0 msecs calling eepro100_init_module+0x0/0x16 initcall eepro100_init_module+0x0/0x16 returned 0 after 0 msecs calling e100_init_module+0x0/0x4d e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation initcall e100_init_module+0x0/0x4d returned 0 after 0 msecs calling epic_init+0x0/0x16 initcall epic_init+0x0/0x16 returned 0 after 0 msecs calling r6040_init+0x0/0x16 initcall r6040_init+0x0/0x16 returned 0 after 0 msecs calling yellowfin_init+0x0/0x16 initcall yellowfin_init+0x0/0x16 returned 0 after 0 msecs calling ns83820_init+0x0/0x20 ns83820.c: National Semiconductor DP83820 10/100/1000 driver. initcall ns83820_init+0x0/0x20 returned 0 after 0 msecs calling tg3_init+0x0/0x16 initcall tg3_init+0x0/0x16 returned 0 after 0 msecs calling bnx2_init+0x0/0x16 initcall bnx2_init+0x0/0x16 returned 0 after 0 msecs calling bnx2x_init+0x0/0x16 initcall bnx2x_init+0x0/0x16 returned 0 after 0 msecs calling skfd_init+0x0/0x16 initcall skfd_init+0x0/0x16 returned 0 after 0 msecs calling net_olddevs_init+0x0/0x81 initcall net_olddevs_init+0x0/0x81 returned 0 after 8 msecs calling init_nic+0x0/0x16 initcall init_nic+0x0/0x16 returned 0 after 0 msecs calling ppp_init+0x0/0x83 PPP generic driver version 2.4.2 initcall ppp_init+0x0/0x83 returned 0 after 0 msecs calling deflate_init+0x0/0x30 PPP Deflate Compression module registered initcall deflate_init+0x0/0x30 returned 0 after 0 msecs calling pppox_init+0x0/0xf NET: Registered protocol family 24 initcall pppox_init+0x0/0xf returned 0 after 0 msecs calling pppoe_init+0x0/0x81 initcall pppoe_init+0x0/0x81 returned 0 after 0 msecs calling slip_init+0x0/0x98 SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=3D256) (6 bi= t encapsulation enabled). CSLIP: code copyright 1989 Regents of the University of California. initcall slip_init+0x0/0x98 returned 0 after 0 msecs calling dummy_init_module+0x0/0x95 initcall dummy_init_module+0x0/0x95 returned 0 after 0 msecs calling macvlan_init_module+0x0/0x45 initcall macvlan_init_module+0x0/0x45 returned 0 after 0 msecs calling rtl8139_init_module+0x0/0x16 initcall rtl8139_init_module+0x0/0x16 returned 0 after 0 msecs calling znet_probe+0x0/0x2bd initcall znet_probe+0x0/0x2bd returned -19 after 0 msecs calling depca_module_init+0x0/0xd4 initcall depca_module_init+0x0/0xd4 returned 0 after 0 msecs calling lp486e_init_module+0x0/0x240 eth%d: i82596 initialization timed out initcall lp486e_init_module+0x0/0x240 returned -19 after 0 msecs calling s2io_starter+0x0/0x16 initcall s2io_starter+0x0/0x16 returned 0 after 0 msecs calling enc28j60_init+0x0/0x1e initcall enc28j60_init+0x0/0x1e returned 0 after 0 msecs calling arcnet_init+0x0/0x50 arcnet loaded. initcall arcnet_init+0x0/0x50 returned 0 after 0 msecs calling arcnet_rfc1201_init+0x0/0x65 arcnet: RFC1201 "standard" (`a') encapsulation support loaded. initcall arcnet_rfc1201_init+0x0/0x65 returned 0 after 0 msecs calling kaweth_init+0x0/0x25 drivers/net/usb/kaweth.c: Driver loading usbcore: registered new interface driver kaweth initcall kaweth_init+0x0/0x25 returned 0 after 0 msecs calling pegasus_init+0x0/0x150 pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver usbcore: registered new interface driver pegasus initcall pegasus_init+0x0/0x150 returned 0 after 0 msecs calling tulip_init+0x0/0x2a initcall tulip_init+0x0/0x2a returned 0 after 0 msecs calling uli526x_init_module+0x0/0x8d uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) initcall uli526x_init_module+0x0/0x8d returned 0 after 0 msecs calling init_netconsole+0x0/0x1bb netconsole: local port 4444 netconsole: local IP 10.0.1.15 netconsole: interface eth0 netconsole: remote port 4444 netconsole: remote IP 10.0.1.16 netconsole: remote ethernet address 00:19:d1:01:f5:55 netconsole: device eth0 not up yet, forcing it usb usb2: suspend_rh (auto-stop) usb usb3: suspend_rh (auto-stop) usb usb4: suspend_rh (auto-stop) hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend usb usb2: suspend_rh hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend ehci_hcd 0000:00:1d.7: suspend root hub hub 3-0:1.0: hub_suspend usb usb3: bus auto-suspend usb usb3: suspend_rh hub 4-0:1.0: hub_suspend usb usb4: bus auto-suspend usb usb4: suspend_rh netconsole: timeout waiting for carrier eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX console [netcon0] enabled netconsole: network logging started initcall init_netconsole+0x0/0x1bb returned 0 after 3837 msecs calling scsi_tgt_init+0x0/0x75 initcall scsi_tgt_init+0x0/0x75 returned 0 after 0 msecs calling spi_transport_init+0x0/0x27 initcall spi_transport_init+0x0/0x27 returned 0 after 0 msecs calling hp_sw_init+0x0/0xf initcall hp_sw_init+0x0/0xf returned 0 after 0 msecs calling clariion_init+0x0/0x26 initcall clariion_init+0x0/0x26 returned 0 after 0 msecs calling ahc_linux_init+0x0/0x61 initcall ahc_linux_init+0x0/0x61 returned 0 after 0 msecs calling init_st+0x0/0x146 st: Version 20080224, fixed bufsize 32768, s/g segs 256 Driver 'st' needs updating - please use bus_type methods initcall init_st+0x0/0x146 returned 0 after 0 msecs calling init_sd+0x0/0xb1 Driver 'sd' needs updating - please use bus_type methods initcall init_sd+0x0/0xb1 returned 0 after 0 msecs calling init_ch_module+0x0/0x87 SCSI Media Changer driver v0.25=20 Driver 'ch' needs updating - please use bus_type methods initcall init_ch_module+0x0/0x87 returned 0 after 0 msecs calling ahci_init+0x0/0x16 ahci 0000:00:1f.2: version 3.0 Pin 1-16 already programmed ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SA= TA mode ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part=20 PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xee444400 port 0xee444500 irq 222 ata2: DUMMY ata3: DUMMY ata4: DUMMY ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: HTS541080G9SA00, MB4IC60H, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA48=20 ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA HTS541080G9SA00 MB4I PQ: 0 AN= SI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't su= pport DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't su= pport DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk initcall ahci_init+0x0/0x16 returned 0 after 1021 msecs calling piix_init+0x0/0x24 ata_piix 0000:00:1f.1: version 2.12 Pin 1-16 already programmed ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi4 : ata_piix scsi5 : ata_piix ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 ata5.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4246N, 0X05, max UDMA/33 ata5.00: configured for UDMA/33 ata6: port disabled. ignoring. scsi 4:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4246N 0X05 PQ: 0 AN= SI: 5 initcall piix_init+0x0/0x24 returned 0 after 161 msecs calling qs_ata_init+0x0/0x16 initcall qs_ata_init+0x0/0x16 returned 0 after 0 msecs calling svia_init+0x0/0x16 initcall svia_init+0x0/0x16 returned 0 after 0 msecs calling vsc_sata_init+0x0/0x16 initcall vsc_sata_init+0x0/0x16 returned 0 after 0 msecs calling pdc_sata_init+0x0/0x16 initcall pdc_sata_init+0x0/0x16 returned 0 after 0 msecs calling nv_init+0x0/0x16 initcall nv_init+0x0/0x16 returned 0 after 0 msecs calling amd_init+0x0/0x16 initcall amd_init+0x0/0x16 returned 0 after 0 msecs calling artop_init+0x0/0x16 initcall artop_init+0x0/0x16 returned 0 after 0 msecs calling atiixp_init+0x0/0x16 initcall atiixp_init+0x0/0x16 returned 0 after 0 msecs calling cmd64x_init+0x0/0x16 initcall cmd64x_init+0x0/0x16 returned 0 after 0 msecs calling efar_init+0x0/0x16 initcall efar_init+0x0/0x16 returned 0 after 0 msecs calling hpt3x2n_init+0x0/0x16 initcall hpt3x2n_init+0x0/0x16 returned 0 after 0 msecs calling it8213_init+0x0/0x16 initcall it8213_init+0x0/0x16 returned 0 after 0 msecs calling ninja32_init+0x0/0x16 initcall ninja32_init+0x0/0x16 returned 0 after 0 msecs calling mpiix_init+0x0/0x16 initcall mpiix_init+0x0/0x16 returned 0 after 0 msecs calling oldpiix_init+0x0/0x16 initcall oldpiix_init+0x0/0x16 returned 0 after 0 msecs calling via_init+0x0/0x16 initcall via_init+0x0/0x16 returned 0 after 0 msecs calling sl82c105_init+0x0/0x16 initcall sl82c105_init+0x0/0x16 returned 0 after 0 msecs calling sis_init+0x0/0x16 initcall sis_init+0x0/0x16 returned 0 after 0 msecs calling triflex_init+0x0/0x16 initcall triflex_init+0x0/0x16 returned 0 after 0 msecs calling ata_generic_init+0x0/0x16 initcall ata_generic_init+0x0/0x16 returned 0 after 0 msecs calling legacy_init+0x0/0x865 initcall legacy_init+0x0/0x865 returned -19 after 0 msecs calling i2o_iop_init+0x0/0x41 I2O subsystem v1.325 i2o: max drivers =3D 8 initcall i2o_iop_init+0x0/0x41 returned 0 after 0 msecs calling i2o_block_init+0x0/0xf7 I2O Block Device OSM v1.325 initcall i2o_block_init+0x0/0xf7 returned 0 after 0 msecs calling i2o_proc_init+0x0/0x14e I2O ProcFS OSM v1.316 initcall i2o_proc_init+0x0/0x14e returned 0 after 0 msecs calling uio_init+0x0/0x7 initcall uio_init+0x0/0x7 returned 0 after 0 msecs calling smx_ce_init_module+0x0/0xf initcall smx_ce_init_module+0x0/0xf returned 0 after 0 msecs calling mon_init+0x0/0xee initcall mon_init+0x0/0xee returned 0 after 1 msecs calling isp116x_init+0x0/0x38 116x: driver isp116x-hcd, 03 Nov 2005 initcall isp116x_init+0x0/0x38 returned 0 after 0 msecs calling r8a66597_init+0x0/0x38 r8a66597_hcd: driver r8a66597_hcd, 10 Apr 2008 initcall r8a66597_init+0x0/0x38 returned 0 after 0 msecs calling c67x00_init+0x0/0xf initcall c67x00_init+0x0/0xf returned 0 after 0 msecs calling usb_stor_init+0x0/0x42 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. initcall usb_stor_init+0x0/0x42 returned 0 after 0 msecs calling usb_usual_init+0x0/0x32 usbcore: registered new interface driver libusual initcall usb_usual_init+0x0/0x32 returned 0 after 0 msecs calling appledisplay_init+0x0/0x4e usbcore: registered new interface driver appledisplay initcall appledisplay_init+0x0/0x4e returned 0 after 0 msecs calling cypress_init+0x0/0x2f usbcore: registered new interface driver cypress_cy7c63 initcall cypress_init+0x0/0x2f returned 0 after 0 msecs calling usb_cytherm_init+0x0/0x3c usbcore: registered new interface driver cytherm cytherm: v1.0:Cypress USB Thermometer driver initcall usb_cytherm_init+0x0/0x3c returned 0 after 0 msecs calling isight_firmware_init+0x0/0x16 usbcore: registered new interface driver isight_firmware initcall isight_firmware_init+0x0/0x16 returned 0 after 0 msecs calling usb_lcd_init+0x0/0x2f usbcore: registered new interface driver usblcd initcall usb_lcd_init+0x0/0x2f returned 0 after 0 msecs calling usb_sisusb_init+0x0/0x1b usbcore: registered new interface driver sisusb initcall usb_sisusb_init+0x0/0x1b returned 0 after 0 msecs calling usbatm_usb_init+0x0/0x5c drivers/usb/atm/usbatm.c: usbatm_usb_init: driver version 1.10 initcall usbatm_usb_init+0x0/0x5c returned 0 after 0 msecs calling init+0x0/0x16 initcall init+0x0/0x16 returned 0 after 0 msecs calling init+0x0/0xa7 Printer Gadget: usb_gadget_register_driver ffffffed initcall init+0x0/0xa7 returned -19 after 0 msecs calling i8042_init+0x0/0x31e pnp: the driver 'i8042 kbd' has been registered i8042 kbd 00:08: driver attached pnp: the driver 'i8042 aux' has been registered i8042 aux 00:09: driver attached PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 initcall i8042_init+0x0/0x31e returned 0 after 9 msecs calling mousedev_init+0x0/0x51 mice: PS/2 mouse device common for all mice initcall mousedev_init+0x0/0x51 returned 0 after 0 msecs calling joydev_init+0x0/0xf initcall joydev_init+0x0/0xf returned 0 after 0 msecs calling evdev_init+0x0/0xf initcall evdev_init+0x0/0xf returned 0 after 0 msecs calling atkbd_init+0x0/0x20 initcall atkbd_init+0x0/0x20 returned 0 after 0 msecs calling lkkbd_init+0x0/0x16 input: AT Translated Set 2 keyboard as /class/input/input0 initcall lkkbd_init+0x0/0x16 returned 0 after 11 msecs calling skbd_init+0x0/0x16 initcall skbd_init+0x0/0x16 returned 0 after 0 msecs calling inport_init+0x0/0x122 inport.c: Didn't find InPort mouse at 0x23c initcall inport_init+0x0/0x122 returned -19 after 0 msecs calling gpio_mouse_init+0x0/0x14 initcall gpio_mouse_init+0x0/0x14 returned -19 after 0 msecs calling cobra_init+0x0/0x13 initcall cobra_init+0x0/0x13 returned 0 after 0 msecs calling gf2k_init+0x0/0x13 initcall gf2k_init+0x0/0x13 returned 0 after 0 msecs calling grip_init+0x0/0x13 initcall grip_init+0x0/0x13 returned 0 after 0 msecs calling iforce_init+0x0/0x7 initcall iforce_init+0x0/0x7 returned 0 after 0 msecs calling stinger_init+0x0/0x16 initcall stinger_init+0x0/0x16 returned 0 after 0 msecs calling warrior_init+0x0/0x16 initcall warrior_init+0x0/0x16 returned 0 after 0 msecs calling zhenhua_init+0x0/0x16 initcall zhenhua_init+0x0/0x16 returned 0 after 0 msecs calling aiptek_init+0x0/0x38 usbcore: registered new interface driver aiptek aiptek: v2.3 (May 2, 2007): Bryan W. Headley/Chris Atenasio/Cedric Brun= /Rene van Paassen aiptek: Aiptek HyperPen USB Tablet Driver (Linux 2.6.x) initcall aiptek_init+0x0/0x38 returned 0 after 0 msecs calling kbtab_init+0x0/0x2d usbcore: registered new interface driver kbtab kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver initcall kbtab_init+0x0/0x2d returned 0 after 0 msecs calling wacom_init+0x0/0x37 usbcore: registered new interface driver wacom wacom: v1.48:USB Wacom Graphire and Wacom Intuos tablet driver initcall wacom_init+0x0/0x37 returned 0 after 0 msecs calling ati_remote_init+0x0/0x3c usbcore: registered new interface driver ati_remote ati_remote: Registered USB driver ATI/X10 RF USB Remote Control v. 2.2.= 1 initcall ati_remote_init+0x0/0x3c returned 0 after 0 msecs calling ati_remote2_init+0x0/0x3c usbcore: registered new interface driver ati_remote2 ati_remote2: ATI/Philips USB RF remote driver 0.2 initcall ati_remote2_init+0x0/0x3c returned 0 after 0 msecs calling powermate_init+0x0/0x16 usbcore: registered new interface driver powermate initcall powermate_init+0x0/0x16 returned 0 after 0 msecs calling uinput_init+0x0/0xf initcall uinput_init+0x0/0xf returned 0 after 0 msecs calling i2c_amd8111_init+0x0/0x16 initcall i2c_amd8111_init+0x0/0x16 returned 0 after 0 msecs calling i2c_sis96x_init+0x0/0x16 initcall i2c_sis96x_init+0x0/0x16 returned 0 after 0 msecs calling i2c_vt586b_init+0x0/0x16 initcall i2c_vt586b_init+0x0/0x16 returned 0 after 0 msecs calling i2c_vt596_init+0x0/0x16 initcall i2c_vt596_init+0x0/0x16 returned 0 after 0 msecs calling i2c_gpio_init+0x0/0x2d i2c-gpio: probe failed: -19 initcall i2c_gpio_init+0x0/0x2d returned -19 after 0 msecs calling i2c_parport_init+0x0/0x144 i2c-parport-light: adapter type unspecified initcall i2c_parport_init+0x0/0x144 returned -19 after 0 msecs calling i2c_voodoo3_init+0x0/0x16 initcall i2c_voodoo3_init+0x0/0x16 returned 0 after 0 msecs calling scx200_acb_init+0x0/0x204 scx200_acb: NatSemi SCx200 ACCESS.bus Driver initcall scx200_acb_init+0x0/0x204 returned -19 after 0 msecs calling ds1682_init+0x0/0x11 i2c-core: driver [ds1682] registered initcall ds1682_init+0x0/0x11 returned 0 after 0 msecs calling eeprom_init+0x0/0x11 i2c-core: driver [eeprom] registered initcall eeprom_init+0x0/0x11 returned 0 after 0 msecs calling max6875_init+0x0/0x11 i2c-core: driver [max6875] registered initcall max6875_init+0x0/0x11 returned 0 after 0 msecs calling pcf8591_init+0x0/0x32 i2c-core: driver [pcf8591] registered initcall pcf8591_init+0x0/0x32 returned 0 after 0 msecs calling w1_init+0x0/0xe4 Driver for 1-wire Dallas network protocol. initcall w1_init+0x0/0xe4 returned 0 after 0 msecs calling w1_gpio_init+0x0/0x14 initcall w1_gpio_init+0x0/0x14 returned -19 after 0 msecs calling w1_smem_init+0x0/0x33 initcall w1_smem_init+0x0/0x33 returned 0 after 0 msecs calling w1_ds2760_init+0x0/0x23 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Sz= abolcs Gyurko initcall w1_ds2760_init+0x0/0x23 returned 0 after 0 msecs calling ds2760_battery_init+0x0/0xf initcall ds2760_battery_init+0x0/0xf returned 0 after 0 msecs calling bpa10x_init+0x0/0x25 Bluetooth: Digianswer Bluetooth USB driver ver 0.9 usbcore: registered new interface driver bpa10x initcall bpa10x_init+0x0/0x25 returned 0 after 0 msecs calling btsdio_init+0x0/0x1e Bluetooth: Generic Bluetooth SDIO driver ver 0.1 initcall btsdio_init+0x0/0x1e returned 0 after 0 msecs calling pci_eisa_init_module+0x0/0x16 initcall pci_eisa_init_module+0x0/0x16 returned 0 after 0 msecs calling cpufreq_stats_init+0x0/0x80 initcall cpufreq_stats_init+0x0/0x80 returned 0 after 0 msecs calling mmc_test_init+0x0/0xf initcall mmc_test_init+0x0/0xf returned 0 after 0 msecs calling tifm_sd_init+0x0/0xf initcall tifm_sd_init+0x0/0xf returned 0 after 0 msecs calling gpio_led_init+0x0/0xf Registered led device: rdc:dmz initcall gpio_led_init+0x0/0xf returned 0 after 0 msecs calling ioat_init_module+0x0/0x16 initcall ioat_init_module+0x0/0x16 returned 0 after 0 msecs calling dca_init+0x0/0xa initcall dca_init+0x0/0xa returned 0 after 0 msecs calling virtio_pci_init+0x0/0x3a initcall virtio_pci_init+0x0/0x3a returned 0 after 0 msecs calling oprofile_init+0x0/0x47 oprofile: using NMI interrupt. initcall oprofile_init+0x0/0x47 returned 0 after 0 msecs calling sysctl_core_init+0x0/0x1e initcall sysctl_core_init+0x0/0x1e returned 0 after 0 msecs calling flow_cache_init+0x0/0x139 initcall flow_cache_init+0x0/0x139 returned 0 after 0 msecs calling llc_init+0x0/0x1b initcall llc_init+0x0/0x1b returned 0 after 0 msecs calling snap_init+0x0/0x2a initcall snap_init+0x0/0x2a returned 0 after 0 msecs calling xt_init+0x0/0x7e initcall xt_init+0x0/0x7e returned 0 after 0 msecs calling tcpudp_mt_init+0x0/0x14 initcall tcpudp_mt_init+0x0/0x14 returned 0 after 0 msecs calling classify_tg_init+0x0/0x14 initcall classify_tg_init+0x0/0x14 returned 0 after 0 msecs calling dccp_mt_init+0x0/0x45 initcall dccp_mt_init+0x0/0x45 returned 0 after 0 msecs calling dscp_mt_init+0x0/0x14 initcall dscp_mt_init+0x0/0x14 returned 0 after 0 msecs calling iprange_mt_init+0x0/0x14 initcall iprange_mt_init+0x0/0x14 returned 0 after 0 msecs calling pkttype_mt_init+0x0/0x14 initcall pkttype_mt_init+0x0/0x14 returned 0 after 0 msecs calling sctp_mt_init+0x0/0x14 initcall sctp_mt_init+0x0/0x14 returned 0 after 0 msecs calling string_mt_init+0x0/0x14 initcall string_mt_init+0x0/0x14 returned 0 after 0 msecs calling tcpmss_mt_init+0x0/0x14 initcall tcpmss_mt_init+0x0/0x14 returned 0 after 0 msecs calling sysctl_ipv4_init+0x0/0x3f initcall sysctl_ipv4_init+0x0/0x3f returned 0 after 1 msecs calling xfrm4_mode_tunnel_init+0x0/0x14 initcall xfrm4_mode_tunnel_init+0x0/0x14 returned 0 after 0 msecs calling ipv4_netfilter_init+0x0/0xf initcall ipv4_netfilter_init+0x0/0xf returned 0 after 0 msecs calling arp_tables_init+0x0/0x78 arp_tables: (C) 2002 David S. Miller initcall arp_tables_init+0x0/0x78 returned 0 after 0 msecs calling arpt_mangle_init+0x0/0xf initcall arpt_mangle_init+0x0/0xf returned 0 after 0 msecs calling cubictcp_register+0x0/0x93 TCP cubic registered initcall cubictcp_register+0x0/0x93 returned 0 after 0 msecs calling inet6_init+0x0/0x2e4 NET: Registered protocol family 10 initcall inet6_init+0x0/0x2e4 returned 0 after 11 msecs calling ah6_init+0x0/0x5a initcall ah6_init+0x0/0x5a returned 0 after 0 msecs calling esp6_init+0x0/0x5a initcall esp6_init+0x0/0x5a returned 0 after 0 msecs calling ipcomp6_init+0x0/0x5a initcall ipcomp6_init+0x0/0x5a returned 0 after 0 msecs calling xfrm6_tunnel_init+0x0/0xdb initcall xfrm6_tunnel_init+0x0/0xdb returned 0 after 0 msecs calling tunnel6_init+0x0/0x5a initcall tunnel6_init+0x0/0x5a returned 0 after 0 msecs calling xfrm6_mode_tunnel_init+0x0/0x14 initcall xfrm6_mode_tunnel_init+0x0/0x14 returned 0 after 0 msecs calling mip6_init+0x0/0xa7 Mobile IPv6 initcall mip6_init+0x0/0xa7 returned 0 after 0 msecs calling packet_init+0x0/0x39 NET: Registered protocol family 17 initcall packet_init+0x0/0x39 returned 0 after 0 msecs calling ipsec_pfkey_init+0x0/0x7a NET: Registered protocol family 15 initcall ipsec_pfkey_init+0x0/0x7a returned 0 after 0 msecs calling br_init+0x0/0xa1 Bridge firewalling registered initcall br_init+0x0/0xa1 returned 0 after 0 msecs calling lapb_init+0x0/0x7 initcall lapb_init+0x0/0x7 returned 0 after 0 msecs calling can_init+0x0/0xd1 can: controller area network core (rev 20071116 abi 8) NET: Registered protocol family 29 initcall can_init+0x0/0xd1 returned 0 after 0 msecs calling sco_init+0x0/0xc2 Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized initcall sco_init+0x0/0xc2 returned 0 after 0 msecs calling init_sunrpc+0x0/0x53 RPC: Registered udp transport module. RPC: Registered tcp transport module. initcall init_sunrpc+0x0/0x53 returned 0 after 1 msecs calling init_rpcsec_gss+0x0/0x2e initcall init_rpcsec_gss+0x0/0x2e returned 0 after 0 msecs calling init_kerberos_module+0x0/0x26 initcall init_kerberos_module+0x0/0x26 returned 0 after 0 msecs calling lane_module_init+0x0/0x4f lec.c: Jul 21 2008 11:15:34 initialized initcall lane_module_init+0x0/0x4f returned 0 after 0 msecs calling econet_proto_init+0x0/0x186 NET: Registered protocol family 19 initcall econet_proto_init+0x0/0x186 returned 0 after 0 msecs calling sctp_init+0x0/0x697 SCTP: Hash tables configured (established 26214 bind 29127) sctp_init_sock(sk: f720c000) initcall sctp_init+0x0/0x697 returned 0 after 9 msecs calling powernowk8_init+0x0/0x6e initcall powernowk8_init+0x0/0x6e returned -19 after 0 msecs calling hpet_insert_resource+0x0/0x1e initcall hpet_insert_resource+0x0/0x1e returned 0 after 0 msecs calling lapic_insert_resource+0x0/0x44 initcall lapic_insert_resource+0x0/0x44 returned 0 after 0 msecs calling init_lapic_nmi_sysfs+0x0/0x33 initcall init_lapic_nmi_sysfs+0x0/0x33 returned 0 after 0 msecs =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D BUG skbuff_head_cache: Poison overwritten -----------------------------------------------------------------------= ------ INFO: 0xf7ccc100-0xf7ccc103. First byte 0x0 instead of 0x6b INFO: Allocated in __alloc_skb+0x30/0x10e age=3D1 cpu=3D1 pid=3D1 INFO: Freed in __kfree_skb+0x63/0x66 age=3D1 cpu=3D0 pid=3D0 INFO: Slab 0xc1c34ca0 objects=3D16 used=3D1 fp=3D0xf7ccc100 flags=3D0x4= 00000c3 INFO: Object 0xf7ccc100 @offset=3D256 fp=3D0xf7ccc200 Bytes b4 0xf7ccc0f0: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a Z= ZZZZZZZZZZZZZZZ Object 0xf7ccc100: 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b .= =2E..kkkkkkkkkkkk Object 0xf7ccc110: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b k= kkkkkkkkkkkkkkk Object 0xf7ccc120: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b k= kkkkkkkkkkkkkkk Object 0xf7ccc130: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b k= kkkkkkkkkkkkkkk Object 0xf7ccc140: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b k= kkkkkkkkkkkkkkk Object 0xf7ccc150: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b k= kkkkkkkkkkkkkkk Object 0xf7ccc160: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b k= kkkkkkkkkkkkkkk Object 0xf7ccc170: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b k= kkkkkkkkkkkkkkk Object 0xf7ccc180: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b k= kkkkkkkkkkkkkkk Object 0xf7ccc190: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b k= kkkkkkkkkkkkkkk Object 0xf7ccc1a0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 k= kkkkkkkkkkkkkk=EF=BF=BD Redzone 0xf7ccc1b0: bb bb bb bb =EF= =BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD =20 Padding 0xf7ccc1d8: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a Z= ZZZZZZZZZZZZZZZ Padding 0xf7ccc1e8: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a Z= ZZZZZZZZZZZZZZZ Padding 0xf7ccc1f8: 5a 5a 5a 5a 5a 5a 5a 5a Z= ZZZZZZZ =20 Pid: 1, comm: swapper Not tainted 2.6.26-tip #3261 [] print_trailer+0xd1/0xd9 [] check_bytes_and_report+0x73/0x8f [] check_object+0xa5/0x15a [] __slab_alloc+0x2fb/0x3c8 [] kmem_cache_alloc+0x4b/0xa8 [] ? __alloc_skb+0x30/0x10e [] ? __alloc_skb+0x30/0x10e [] __alloc_skb+0x30/0x10e [] alloc_skb+0xc/0xe [] find_skb+0x28/0x66 [] netpoll_send_udp+0x2b/0x1cf [] ? _spin_lock_irqsave+0x4b/0x55 [] write_msg+0x79/0xac [] ? write_msg+0x0/0xac [] __call_console_drivers+0x56/0x63 [] _call_console_drivers+0x57/0x5b [] release_console_sem+0x112/0x1a5 [] vprintk+0x344/0x35e