From: David Brownell <david-b@pacbell.net>
To: netdev@vger.kernel.org
Cc: Jeff Garzik <jgarzik@pobox.com>
Subject: Re: [RESEND/UPDATED patch 2.6.25] smc91x section fix
Date: Fri, 25 Jul 2008 13:11:59 -0700 [thread overview]
Message-ID: <200807251311.59329.david-b@pacbell.net> (raw)
In-Reply-To: <200804182001.18234.david-b@pacbell.net>
From: David Brownell <dbrownell@users.sourceforge.net>
Section fixup:
WARNING: drivers/net/built-in.o(.text+0x1a2c): Section mismatch
in reference from the function smc_drv_probe()
to the function .init.text:smc_probe()
The function smc_drv_probe() references
the function __init smc_probe().
This is often because smc_drv_probe lacks a __init
annotation or the annotation of smc_probe is wrong.
Also switch to platform_driver_probe(), and mark the exit code as such.
Total footprint shrinkage is about 2KB on ARMv5.
Note that few platform devices are actually hotpluggable, and these
smc devices are evidently not exceptions to that rule ... else there
would have been oopsing in this driver from the smc_probe() problem.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
---
I thought this was queued for 2.6.26, or (later) 2.6.27 ...
drivers/net/smc91x.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/drivers/net/smc91x.c 2008-07-24 21:27:38.000000000 -0700
+++ b/drivers/net/smc91x.c 2008-07-24 21:42:15.000000000 -0700
@@ -2096,7 +2096,8 @@ static inline void smc_request_datacs(st
}
}
-static void smc_release_datacs(struct platform_device *pdev, struct net_device *ndev)
+static void __exit smc_release_datacs(struct platform_device *pdev,
+ struct net_device *ndev)
{
if (SMC_CAN_USE_DATACS) {
struct smc_local *lp = netdev_priv(ndev);
@@ -2123,7 +2124,7 @@ static void smc_release_datacs(struct pl
* 0 --> there is a device
* anything else, error
*/
-static int smc_drv_probe(struct platform_device *pdev)
+static int __init smc_drv_probe(struct platform_device *pdev)
{
struct smc91x_platdata *pd = pdev->dev.platform_data;
struct smc_local *lp;
@@ -2232,7 +2233,7 @@ static int smc_drv_probe(struct platform
return ret;
}
-static int smc_drv_remove(struct platform_device *pdev)
+static int __exit smc_drv_remove(struct platform_device *pdev)
{
struct net_device *ndev = platform_get_drvdata(pdev);
struct smc_local *lp = netdev_priv(ndev);
@@ -2296,8 +2297,7 @@ static int smc_drv_resume(struct platfor
}
static struct platform_driver smc_driver = {
- .probe = smc_drv_probe,
- .remove = smc_drv_remove,
+ .remove = __exit_p(smc_drv_remove),
.suspend = smc_drv_suspend,
.resume = smc_drv_resume,
.driver = {
@@ -2317,7 +2317,7 @@ static int __init smc_init(void)
#endif
#endif
- return platform_driver_register(&smc_driver);
+ return platform_driver_probe(&smc_driver, smc_drv_probe);
}
static void __exit smc_cleanup(void)
prev parent reply other threads:[~2008-07-25 20:12 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-25 3:34 [patch 2.6.25-rc3] smc91x section fix David Brownell
2008-02-25 6:02 ` Sam Ravnborg
2008-02-25 6:33 ` David Brownell
2008-02-25 20:11 ` Sam Ravnborg
2008-04-19 3:01 ` [RESEND/UPDATED patch 2.6.25] " David Brownell
2008-04-25 6:02 ` Jeff Garzik
2008-07-25 20:11 ` David Brownell [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200807251311.59329.david-b@pacbell.net \
--to=david-b@pacbell.net \
--cc=jgarzik@pobox.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).